Water, water everywhere, but every drop unique: Emerging challenges in the science to understand the role of contaminants in management of drinking water supplies

S.T. Glassmeyer; E.E. Burns; Michael J. Focazio; Edward T. Furlong; Matthew O. Gribble; M.A. Jahne; S.P. Keely; A.R. Kenicutt; Dana W. Kolpin; E.K. Medlock Kakaley; S.L. Pfaller

doi:10.1029/2022gh000716

USGS · 70250734

Water, water everywhere, but every drop unique: Emerging challenges in the science to understand the role of contaminants in management of drinking water supplies

S.T. Glassmeyer·E.E. Burns·Michael J. Focazio·Edward T. Furlong·Matthew O. Gribble·M.A. Jahne·S.P. Keely·A.R. Kenicutt·Dana W. Kolpin·E.K. Medlock Kakaley·S.L. Pfaller

View original source ↗Export metadata ↓

Abstract

The protection and management of water resources continues to be challenged by multiple and ongoing factors such as shifts in demographic, social, economic, and public health requirements. Physical limitations placed on access to potable supplies include natural and human-caused factors such as aquifer depletion, aging infrastructure, saltwater intrusion, floods, and drought. These factors, although varying in magnitude, spatial extent, and timing, can exacerbate the potential for contaminants of concern (CECs) to be present in sources of drinking water, infrastructure, premise plumbing and associated tap water. This monograph examines how current and emerging scientific efforts and technologies increase our understanding of the range of CECs and drinking water issues facing current and future populations. It is not intended to be read in one sitting, but is instead a starting point for scientists wanting to learn more about the issues surrounding CECs. This text discusses the topical evolution CECs over time (Section 1), improvements in measuring chemical and microbial CECs, through both analysis of concentration and toxicity (Section 2) and modeling CEC exposure and fate (Section 3), forms of treatment effective at removing chemical and microbial CECs (Section 4), and potential for human health impacts from exposure to CECs (Section 5). The paper concludes with how changes to water quantity, both scarcity and surpluses, could affect water quality (Section 6). Taken together, these sections document the past 25 years of CEC research and the regulatory response to these contaminants, the current work to identify and monitor CECs and mitigate exposure, and the challenges facing the future.

Explore related subjects

GeoHealth Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

S.T. Glassmeyer, E.E. Burns, Michael J. Focazio, Edward T. Furlong, Matthew O. Gribble, M.A. Jahne, S.P. Keely, A.R. Kenicutt, Dana W. Kolpin, E.K. Medlock Kakaley, S.L. Pfaller. 2023-12-28. Water, water everywhere, but every drop unique: Emerging challenges in the science to understand the role of contaminants in management of drinking water supplies. https://doi.org/10.1029/2022gh000716

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Surface variable‐based machine learning for scalable arsenic prediction in undersampled areas

In the United States, private wells are not federally regulated, and many households do not test for Arsenic (As). Chronic exposure is linked with multiple health outcomes, and risk can change sharply over short distances and with well depth. Coarse maps or sparse sampling often miss exceedances. Most existing models operate at ∼1 km resolution and use groundwater chemistry or detailed geologic logs, which limits their use in undersampled areas where improved guidance is most needed. We overcome these limitations by developing a machine learning model for Minnesota, USA, that predicts As exposure risk using only surficial variables from remote sensing and global data sets. Variables related to surface water hydrology and geomorphology are selected based on mechanistic links that control redox conditions and As mobilization. Local training was essential, and surficial geology variables that are more sensitive to local conditions were needed to maximize model accuracy. The resulting complete model was sufficiently sensitive to generate accurate and detailed risk maps and depth profiles of As concentrations above the 10 μg/L maximum contaminant level. Accuracy depended on local training data density. We identified a training data density of 0.07 wells/km 2 as a practical target for stable county-level performance. Maps of exceedance probabilities highlight priority areas for testing that are particularly important in rural communities that have received less sampling. These results support public health action by guiding where to install wells and where to test them, how much new sampling is needed, and where treatment outreach is most urgent.

Minnesota↗

USGS2025

Contributions of Great Salt Lake playa- and industrially-sourced priority pollutant metals in dust contribute to possible health hazards in the communities of northern Utah

Communities and ecosystems of northern Utah, USA receive particulate pollution from anthropogenic activity and dust emissions from sources including the Great Salt Lake (“the Lake”) playa. In addition to affecting communities, anthropogenic pollution is delivered to the Lake's playa sediments, which are eroded during dust events. Yet, spatial variability in dust flux and composition and their risks to human health are poorly understood. We analyzed dust in 17 passive samplers proximal to the Lake during fall 2022 for dust flux, the dust fraction of particulate matter, 87 Sr/ 86 Sr, and elemental geochemistry. We evaluated spatial patterns of 11 priority pollutant metals and estimated the hypothetical non-cancer dust and soil ingestion health hazard for six age cohorts. We observed the highest dust fluxes proximal to the Lake's playa. The highest concentrations of and greatest number of metals occurred in and south of Ogden, UT. Sites to the northeast of Farmington Bay had the highest fluxes. Metal concentrations and 87 Sr/ 86 Sr suggest that the dust composition near Bountiful represents contributions from anthropogenic sources, whereas the dust composition to the northeast of Farmington Bay reflects the Lake's playa emissions. Evaluations of potential health hazards from dust ingestion suggest that children between birth and 6 years are vulnerable at higher ingestion rates. Thallium, As, Pb, Co and Cr contributed most to the estimated hazard. Among these, As and sometimes Pb are likely derived from the Lake's playa emissions. Thus, suppression of dust emissions from the Lake's playa may decrease possible health risks for children in northern Utah.

Utah↗

USGS2025

Physicochemical properties and bioreactivity of sub-10 µm geogenic particles: Comparison of volcanic ash and desert dust

Exposure to ambient particulate matter (PM) with an aerodynamic diameter of <10 μm (PM 10 ) is a well-established health hazard. There is increasing evidence that geogenic (Earth-derived) particles can induce adverse biological effects upon inhalation, though there is high variability in particle bioreactivity that is associated with particle source and physicochemical properties. In this study, we investigated physicochemical properties and biological reactivity of volcanic ash from the April 2021 eruption of La Soufrière volcano, St. Vincent, and two desert dust samples: a standardized test dust from Arizona and an aeolian Gobi Desert dust sampled in China. We determined particle size, morphology, mineralogy, surface texture and chemistry in sub-10 μm material to investigate associations between particle physicochemical properties and observed bioreactivity. We assessed cellular responses (cytotoxic and pro-inflammatory effects) to acute particle exposures (24 hr) in monocultures at the air-liquid interface using two types of cells of the human airways: BEAS-2B bronchial epithelial cells and A549 alveolar type II epithelial cells. In acellular assays, we also assessed particle oxidative potential and the presence of microorganisms. The results showed that volcanic ash and desert dust exhibit intrinsically different particle morphology, surface textures and chemistry, and variable mineralogical content. We found that Gobi Desert dust is more bioreactive than freshly erupted volcanic ash and Arizona test dust, which is possibly linked to the presence of microorganisms (bacteria) and/or nanoscale elongated silicate minerals (potentially clay such as illite or vermiculite) on particle surfaces.

GeoHealth↗