Real-time performance of the PLUM earthquake early warning method during the 2019 M6.4 and M7.1 Ridgecrest, California, Earthquakes

Sarah E. Minson; Jessie Kate Saunders; Julian J. Bunn; Elizabeth S. Cochran; Annemarie S. Baltay; Deborah L. Kilb; Mitsuyuki Hoshiba; Yuki Kodera

doi:10.1785/0120200021

USGS · 70237093

Real-time performance of the PLUM earthquake early warning method during the 2019 M6.4 and M7.1 Ridgecrest, California, Earthquakes

Sarah E. Minson·Jessie Kate Saunders·Julian J. Bunn·Elizabeth S. Cochran·Annemarie S. Baltay·Deborah L. Kilb·Mitsuyuki Hoshiba·Yuki Kodera

View original source ↗Export metadata ↓

Abstract

We evaluate the timeliness and accuracy of ground‐motion‐based earthquake early warning (EEW) during the July 2019 M 6.4 and 7.1 Ridgecrest earthquakes. In 2018, we began retrospective and internal real‐time testing of the propagation of local undamped motion (PLUM) method for earthquake warning in California, Oregon, and Washington, with the potential that PLUM might one day be included in the ShakeAlert EEW system. A real‐time version of PLUM was running on one of the ShakeAlert EEW system’s development servers at the time of the 2019 Ridgecrest sequence, allowing us to evaluate the timeliness and accuracy of PLUM’s warnings for the M 6.4 and 7.1 mainshocks in real time with the actual data availability and latencies of the operational ShakeAlert EEW system. The latter is especially important because high‐data latencies during the M 7.1 earthquake degraded ShakeAlert’s performance. PLUM proved to be largely immune to these latencies. In this article, we present a retrospective analysis of PLUM performance and explore three potential regional alerting strategies ranging from spatially large regions (counties), to moderate‐size regions (National Weather Service public forecast zones), to high‐spatial specificity (50 km regular geographic grid). PLUM generated initial shaking forecasts for the two mainshocks 5 and 6 s after their respective origin times, and faster than the ShakeAlert system’s first alerts. PLUM was also able to accurately forecast shaking across southern California for all three alerting strategies studied. As would be expected, a cost‐benefit analysis of each approach illustrates trade‐offs between increasing warning time and minimizing the area receiving unneeded alerts. Choosing an optimal alerting strategy requires knowledge of users’ false alarm tolerance and minimum required warning time for taking protective action, as well as the time required to distribute alerts to users.

Explore related subjects

Bulletin of the Seismological Society of America Article

Source-reported bounding extent: 35.58529318061384° to 35.70749253887843° latitude; -117.79335021972655° to -117.55233764648438° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Sarah E. Minson, Jessie Kate Saunders, Julian J. Bunn, Elizabeth S. Cochran, Annemarie S. Baltay, Deborah L. Kilb, Mitsuyuki Hoshiba, Yuki Kodera. 2020-06-16. Real-time performance of the PLUM earthquake early warning method during the 2019 M6.4 and M7.1 Ridgecrest, California, Earthquakes. https://doi.org/10.1785/0120200021

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗

USGS2026

Simulation-based scenario ShakeMaps for large magnitude (MW6.5+) crustal earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults, Washington, USA

Scenario ground‐motion maps based on empirical ground‐motion models (GMMs) provide a rapid and generally reliable means of estimating the amplitude and distribution of earthquake shaking. However, because GMMs are designed for broad applicability, they often rely on simplified representations of Earth structure, which can limit their accuracy in regions with complex source, path, and site effects. This can substantially impact the accuracy of predicted shaking in areas like western Washington State, where deep, interconnected basin structure exerts a strong influence on seismic‐wave propagation. In this study, we present a new suite of simulation‐based scenario ShakeMaps that characterize ground shaking from large‐magnitude ( ⁠ M W 6.5–7.5) earthquakes on the Seattle, Tacoma, and southern Whidbey Island faults. These maps are developed using results from recent 3D wave propagation simulations ( Stone et al. , 2022 , 2023 , 2025 ) that incorporate realistic rupture geometries, variable slip distributions, and a regional 3D seismic velocity model with shallow soils. Broadband ground motions are estimated by combining the low‐frequency (<1 Hz) deterministic seismograms from these studies with high‐frequency (1–10 Hz) stochastic seismograms. Simulated ground motions are corrected to account for the enforced minimum shear‐wave velocity and nonlinear site response. The resulting ShakeMaps represent median ground‐shaking estimates derived from multiple rupture scenarios with varying slip distributions and hypocenter locations for each fault. To extend ShakeMap coverage beyond the simulation domain (i.e., into eastern Washington, northern Oregon, and southwestern British Columbia), we scale GMM‐based ground‐motion estimates using amplification patterns observed in the simulations. These new ShakeMaps reveal the substantial influence of deep basin structure on shaking intensity, underscoring the importance of considering crustal structure complexity in regional hazard assessments for the Pacific Northwest.

Washington↗

USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗