USGS Science⌕ Search

USGS · 70230947

Regional occurrence of aqueous tungsten and relations with antimony, arsenic and molybdenum concentrations (Sardinia, Italy)

Abstract

T ungsten (W) is rarely found in natural waters, yet it can be introduced into the food chain and cause potentially toxic effects. Uptake of W by plants and vegetables, or trace presence of W in drinking water are possible vectors for ingestion of W by humans. The latter is recognized as a possible cause of lymphatic leukemia. Increased uses of W might result in a degradation of water resources, with attendant adverse effects on biota and human health. Therefore, this study was aimed at investigating regional occurrence and speciation of W in aquatic systems in Sardinia, Italy, factors affecting W mobility and possible relations with other oxyanion-forming trace elements such as Sb, As and Mo. Although our results are specifically from Sardinia, the implications are broader and should prompt future studies in other areas with known high W concentrations. A total of 350 sample sites are reported here, including surface waters, groundwaters, mine drainages, thermal waters and local seawater. The waters were analyzed for major and trace components, including W, Sb, As and Mo. The waters showed a variety of major chemical compositions and W concentrations. High concentrations of W were found in some mine waters and drainages from slag heaps, with W, Sb and As up to 140, 5000 and 800 μg L −1 , respectively. The highest concentrations of W occurred under slightly alkaline pH and oxygenated conditions, and were likely due to the dissolution of scheelite [CaWO 4 ] hosted in materials with which the water came into contact. High W concentrations also were observed in thermal waters, under alkaline pH and reducing conditions, and sometimes coincided with relatively high concentrations either of As or Mo. Previous studies of W geochemistry have focused on WO 4 2− as the major dissolved form of W. For this study, we have augmented the thermodynamic database in PHREEQC to include possible formation of many other W-bearing complexes gleaned from the literature. The results of the speciation calculations with the newly added complexation reactions shows that the neutral species CaWO 4 ° and MgWO 4 ° are particularly dominant in most W-bearing waters and lead to undersaturation with respect to scheelite and other W-bearing minerals. Assessing W contamination in water systems and establishing W limits in drinking water may prevent potential adverse effects of W on human and ecosystem health.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 38.865374851611634° to 41.31082388091818° latitude; 7.943115234375001° to 9.920654296875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Rosa Cidu, Riccardo Biddau, Franco Frau, Richard B. Wanty, Stefano Naitza. 2021. Regional occurrence of aqueous tungsten and relations with antimony, arsenic and molybdenum concentrations (Sardinia, Italy). https://doi.org/10.1016/j.gexplo.2021.106846

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Top-down targeted network analysis of critical mineral commodities applied to international geochemistry database

The global demand for critical mineral commodities is rapidly increasing, making domestic production an important factor in supporting the economy and national security. Large scale, publicly available geochemical databases allow for the application of data informatics methods to interrogate critical mineral commodities data for correlations in deposit formation and distribution, particularly for identifying enrichment of multiple critical mineral commodities at the same deposit. In this study, we applied network analysis to the Critical Minerals Mapping Initiative (CMMI) ore geochemistry (Critical Minerals in Ores, CMiO) database to identify the high concentration (defined as 10× bulk crustal abundance) co-occurrence of different critical mineral commodities across a mineral system hierarchy from deposit environments to individual deposits. Identifying patterns or unique outliers in enrichment in network communities will allow for the location of secondary critical mineral commodity resources from under-utilized deposits. We find trends in the enrichment of critical mineral commodities in network-communities between the elements praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) across multiple CMiO database deposit environments and groups down to specific deposit types and sites. A separate trend in network community deposition is observed as well between iridium (Ir) and platinum (Pt) in deposit environments, groups, types, and sites. Network analysis focused on critical minerals in magmatic-hydrothermal deposits identified multiple deposit sites from different deposit types within the CMiO database with concentrations of Dy, Nd, Tb, Pr, Ir, and Pt that are at least ten times greater than the crustal average. This approach can be applied to any target element(s) or deposit(s) of interest, allowing broad investigation of co-enriched critical mineral commodities.

Journal of Geochemical Exploration↗

Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain

VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey's (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite . Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.

Texas↗

Hyperspectral mapping of magmatic-hydrothermal sericite, Battle Mountain mining district, Nevada

We demonstrate the utility of multi-scale imaging spectroscopy data (hyperspectral data) to differentiate magmatic-hydrothermal sericite from other white micas based on grain size, in a case study of the Battle Mountain mining district in Humboldt and Lander Counties, Nevada. The Battle Mountain mining district contains porphyry, skarn, and distal disseminated deposits that formed in magmatic-hydrothermal systems, as well as sedimentary-rock hosted gold deposits of less certain origin. We generated spectral-based mineral maps of the Battle Mountain mining district to examine the spatial distribution of spectrally dominant minerals such as kaolinite, montmorillonite , and white micas (muscovite, sericite, and illite). We then used spectral-based mineral mapping to characterize the grain size and composition of white micas, enabling us to differentiate igneous muscovite from magmatic-hydrothermal sericite. By integrating our spectral-based maps with geologic mapping, airborne aeromagnetic data, and prior studies on mines and deposits in Battle Mountain, we determined that finer grained, higher Al sericite spatially correlated with the footprints of known magmatic-hydrothermal systems and is interpreted as forming from magmatic-hydrothermal alteration. Larger grained, lower Al muscovites are distal from known magmatic-hydrothermal systems and are interpreted as being igneous derived siliciclastic sediments that became constituents of the host sedimentary rocks. Techniques described in this contribution can be applied to any appropriate hyperspectral data, regardless of sensor type used to collect the data.

Nevada↗