USGS Science⌕ Search
Home/Archive/USGS

USGS · 70221308

Pumping test methods for determining aquifer characteristics

S.M. Lang
View original source ↗Export metadata ↓

Abstract

Data describing the shape and manner in which the cone of depression forms about a well discharging at a constant rate are used with various formulas to determine the hydraulic characteristics of aquifer materials. The solutions to these formulas generally are graphical and may be used to detect the presence of hydraulic or geologic boundaries to the aquifer .

Explore related subjects

ASTM Special Technical PublicationArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

S.M. Lang. 1966. Pumping test methods for determining aquifer characteristics. https://doi.org/10.1520/stp47258s

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2003

Using semipermeable membrane devices (SPMDs) to assess the toxicity and teratogenicity of aquatic amphibian habitats

Environmental contamination has been suspected of being partially responsible for recent declines in amphibian populations. It is often not feasible to identify all of the compounds in an environment, nor the concentrations in which they are present. SPMDs are passive sampling devices that uptake lipophilic compounds from the environment in a manner similar to aquatic organisms. The extracts from the SPMDs, therefore, contain a composite sample of the compounds that are present in the environment. In this paper, we outline the methods from studies in which we have used extracts from SPMDs in toxicity tests on amphibian larvae. Using SPMD extracts makes it possible to establish potential links between amphibian deformities and declines and environmental contamination by lipophilic compounds.

ASTM Special Technical Publication↗
USGS1999

Nondestructive laboratory measurement of geotechnical and geoacoustic properties through intact core-liner

High-resolution automated measurement of the geotechnical and geoacoustic properties of soil at the U.S. Geological Survey (USGS) is performed with a state-of-the-art multi-sensor whole-core logging device. The device takes measurements, directly through intact sample-tube wall, of p-wave acoustic velocity, of soil wet bulk density, and magnetic susceptibility. This paper summarizes our methodology for determining soil-sound speed and wet-bulk density for material encased in an unsplit liner. Our methodology for nondestructive measurement allows for rapid, accurate, and high-resolution (1 cm-spaced) mapping of the mass physical properties of soil prior to sample extrusion.

ASTM Special Technical Publication↗
USGS1998

Methods for assessing the impacts of ultraviolet-B radiation on aquatic invertebrates

A standard methodology for assessing the impacts of simulated solar ultraviolet-B radiation (UV-B) on aquatic invertebrates was established. A solar simulator was used to expose a variety of aquatic invertebrates to different levels of UV-B. The simulator was calibrated as close as possible to match local ambient solar radiation measured in and out of water with a scanning spectroradiometer. A series of repeated exposures were conducted to determine the effects of UV-B on two species of Ceriodaphnia . Survivorship of C. reticulata declined with increasing UV-B with 100% mortality occurring after four daily 5 hr exposures to a UV-B irradiance that was 14% of ambient sunlight (40.8/μW/cm 2 ) and 70% mortality for C. dubia after seven days of an exposure to 5% of ambient (14.5μW/cm 2 ). Significant reductions in fertility (#young/adult) was observed in both low and high light adapted individuals with low light individuals appearing to be more sensitive. This methodology allowed us to make comparisons to natural conditions in aquatic habitats and to make risk assessments for individual species.

ASTM Special Technical Publication↗