USGS Science⌕ Search

USGS · 70212613

Classification of oil spill by thicknesses using multiple remote sensors

Abstract

Satellite Synthetic Aperture Radar (SAR) is an operational tool for monitoring and assessment of oil spills. Satellite SAR has primarily been used to detect the presence/absence of oil, yet its ability to discriminate oil emulsions within a detected oil slick has not been fully exploited. Additionally, one of the challenges in the past has been the ability to deliver strategic information derived from satellite remote sensing in a timely fashion to responders in the field. This study presents methods for the rapid classification of oil types and estimated thicknesses, from which information about thick oil and oil emulsions (i.e., “actionable” oil) can be delivered in an operational timeframe to responders in the field. Experiments carried out at the OHMSETT test facility in New Jersey demonstrate that under specific viewing conditions, a single polarization satellite SAR image can record a signal variance between thick stable emulsions and non-emulsified oil. During a series of field campaigns in the Gulf of Mexico with in situ measurements of oil thickness, multiple satellite data were obtained including fully polarimetric C-band SAR imagery from RADARSAT-2 and multispectral imagery from ASTER and WorldView-2. One campaign included the airborne polarimetric UAVSAR L-band sensor. An oil/emulsion thickness classification product was generated based on RADARSAT-2 polarimetric imagery using entropy and the damping ratio derivations. Herein, we present the classification methods to generate oil thickness products from SAR, validated by sea-truth observations, the multispectral imagery, and the UAVSAR data. We tested the ability to deliver these products with minimum latency to responding vessels via NOAA. During field operations in the Gulf of Mexico, a satellite SAR-based product of oil delineation by relative thickness was delivered to a responding vessel 42 min after the RADARSAT-2 data acquisition. This proof-of-concept test using satellite SAR and multispectral imagery to detect emulsions and deliver a derived information product to a vessel in near-real-time points directly to methods for satellite-based assets to be used in the near future for oil spill tactical response operations.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 28.943265329407495° to 30.17599895913958° latitude; -90.2471923828125° to -88.93157958984375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Oscar Garcia-Pineda, Gordon Staples, Cathleen E Jones, Chuanmin Hu, Benjamin Holt, Villy Kourafalou, George Graettinger, Lisa DiPinto, Ellen Ramirez, David Street, Jay Cho, Gregg A. Swayze, Shaojie Sun, Diana Garcia, Francisco Haces-Garcia. 2020. Classification of oil spill by thicknesses using multiple remote sensors. https://doi.org/10.1016/j.rse.2019.111421

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Methodology for assessing the accuracy of long-term, annual land cover monitoring at national scale: Experiences from the Land Change Monitoring, Assessment, and Projection (LCMAP) initiative

Annual land cover monitoring using medium-resolution satellite imagery represents a transition from periodic mapping campaigns to continuous observation systems. This transition introduces accuracy assessment challenges not encountered in one-time mapping efforts, particularly when the initial monitoring period is extended forward in time. These challenges are not addressed in existing guidance, which remains largely framed around the evaluation of maps of a single date or maps showing changes between two dates. We present a set of methodological adaptations to adjust to this evolving paradigm, using as a case study the U.S. Geological Survey (USGS) Land Change Monitoring, Assessment, and Projection (LCMAP) initiative, which generated annual land cover and land cover change products across the historical Landsat archive. Assessing the accuracy of these products was an essential component of LCMAP and resulted in an extensive reference sample dataset that may be used for accuracy estimation, area estimation, or support in the development of new algorithms or models. We review the LCMAP methodology and highlight challenges encountered and lessons learned that are transferable to other long-term, temporally dense monitoring programs. This framework demonstrates that statistically rigorous assessment can scale to operational annual land cover production, while the experiences of the project clarify where existing good practice guidance should be extended to support the needs of ongoing, continuous land cover monitoring.

Remote Sensing of Environment↗

On-demand global Landsat evapotranspiration product: Development, evaluation, and dissemination

Global actual evapotranspiration (ET) is one of the essential climate variables needed to understand and manage the relationships among food, energy, and water resources. The U.S. Geological Survey Earth Resources Observation and Science (EROS) Center launched a provisional ET product in 2020, offering on-demand, field-scale global coverage derived from Landsat data through the EROS Science Processing Architecture (ESPA) platform. The ESPA interface provides ET data for cloud-free Landsat overpasses starting in 1982 with Landsat 4 through the current Landsat 9. The ET data are delivered as a Provisional Level-3 Science product created using the Operational Simplified Surface Energy Balance (SSEBop) model. Landsat surface temperature and reference ET are the main model drivers along with vegetation index and net radiation for model parameterization. A large volume of Landsat-based ET orders (e.g., over 1,200,000 images from June 2020 through December 2025) around the world indicate increasing awareness and application of the ET data. The ESPA platform enables land and water resource managers and researchers to access a first-order ET product without requiring advanced knowledge of remote sensing technology or evapotranspiration modeling. We present the methodology and workflow of the on-demand Landsat ET product and its performance evaluations over diverse hydro-climatic settings. The product can help estimate field-scale consumptive water use and thus quickly and consistently assess historical water use, allocation, and budget to inform water management under changing environments. Future ET data aggregated to monthly and seasonal time scales are expected to enhance integration with decision-making tools and procedures.

Remote Sensing of Environment↗

A framework for integrating spatiotemporal deep learning methods with landsat for annual land cover and impervious surface mapping

Land cover information is essential for understanding Earth’s surface dynamics and how vegetation, water, soil, climate, and terrain interact. The National Land Cover Database (NLCD) has been the authoritative source for consistent U.S. land cover mapping. To extend NLCD’s temporal resolution and reduce production latency, we developed the Land Cover Artificial Mapping System (LCAMS)—a prototype spatiotemporal deep learning framework piloted as the foundation for the new Annual NLCD. LCAMS builds on concepts from legacy NLCD and the U.S. Geological Survey Land Change Monitoring, Assessment, and Projection (LCMAP) initiatives. It employs a loosely coupled two-stage architecture consisting of independent but functionally interdependent spatial and temporal models. Spatial models extract per-year information from Landsat data, while the temporal models refine the spatial outputs to enforce inter-annual consistency—critical for reliable land change monitoring. LCAMS produces annual 30 m resolution land cover and impervious surface outputs, with region-specific fine-tuning to generalize across diverse landscapes and temporal dynamics. Validation was conducted using an independent dataset of 1925 randomly sampled plots from five U.S. Landsat Analysis Ready Data (ARD) tiles spanning 1985-2021, selected for spatial and temporal variability. This dataset was used consistently to evaluate LCAMS, Legacy NLCD, and LCMAP. Using the NLCD legend, LCAMS achieved 72.1 ± 1.60% overall agreement, compared to 71.1 ± 1.7% agreement for Legacy NLCD. Using the LCMAP legend, LCAMS achieved 83.4 ± 1.22% agreement, compared to 84.6 ± 1.11% agreement for LCMAP. Overall, LCAMS delivers comparable accuracy while offering higher thematic resolution, longer temporal coverage, and automated production of annual 30 m CONUS land cover.

Remote Sensing of Environment↗