USGS Science⌕ Search

USGS · 70208501

40Ar/39Ar dates for the Spanish Peaks intrusions in south-central Colorado

Abstract

A diverse suite of spatially and temporally juxtaposed igneous rocks ranging from alkaline lamprophyres to granites intruded south-central Colorado during late Oligocene and early Miocene time. In addition to the stocks of the East and West Spanish Peaks, there are three types of dikes exposed in the region, based on orientation: radial, subparallel (striking approximately east–west), and independent dikes. The most striking features of this area are the numerous dikes radiating out from West Spanish Peak, some rising several tens of meters above the surrounding terrain and discontinuously exposed for tens of kilometers. New results from 40 Ar/ 39 Ar dating indicate that magmatism in the Spanish Peaks region began about 26.6 Ma and continued until about 21.8 Ma. Field evidence suggests that the initial intrusions were subparallel alkaline lamprophyre dikes south of the Spanish Peaks. A subsequent period of sub-alkaline magmatism occurred, producing West Spanish Peak (24.6 ± 0.13 Ma), East Spanish Peak (23.9 ± 0.08 Ma), and the radial dikes focused on West Spanish Peak. The final phase of magmatism included subparallel sub-alkaline lamprophyre dikes northeast of the Spanish Peaks. The 40 Ar/ 39 Ar results of this study substantiate the intrusive history derived from field relationships and establish the order of intrusion as West Spanish Peak, East Spanish Peak, and radial dikes, respectively. This study has implications for both the timing and style of the initiation of the Rio Grande rift, as well as the petrogenetic relationship between alkaline and sub-alkaline rocks in relatively stable cratonic areas.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 35.737595151747826° to 38.06539235133249° latitude; -105.875244140625° to -104.150390625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B.S. Penn, David A. Lindsey. 2009-05-13. 40Ar/39Ar dates for the Spanish Peaks intrusions in south-central Colorado. https://doi.org/10.2113/gsrocky.44.1.17

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The edge of a Permian erg: Eolian facies and provenance of the Lyons Sandstone in northern Colorado

Facies of the Permian Lyons Sandstone are described and interpreted based on analyses of 23 cores from Larimer and Weld counties, Colorado. Here, the Lyons Sandstone consists of very fine- to medium-grained sandstone with minor silt and mudstone interbeds. The unit has five recurrent siliciclastic facies that can be grouped into two facies associations (FA). FA1 consists of (1) high-angle, cross-laminated sandstone (Facies 1; interpreted as eolian dune remnants); (2) low-angle, cross-laminated and horizontally laminated sandstone (Facies 2; interdune); and (3) chaotically bedded to folded sandstone (Facies 3; lower dune flanks). FA2 , in contrast, is mainly (4) wavy- to irregularly laminated silty sandstone (Facies 4; wet to damp interdune); and (5) massive to wavy-laminated silt-rich mudstone (Facies 5; ponded water areas between dunes) with minor amounts of high-angle, cross-laminated sandstone (Facies 1) and low-angle, cross-laminated and horizontally laminated sandstone (Facies 2). FA1 is hypothesized to have been produced in an eolian system akin to those that might exist in the dune-dominated portion of an erg, whereas FA2 was deposited in the intermittently wet portion of this eolian system, perhaps along erg margins or in flat dune-adjacent settings that were impacted by the water table. Isopach data suggests that the study area is on the fringe of a larger Lyons system that spans > 100,000 km 2 , and was deposited close to the Ancestral Rockies—a paleogeography consistent with deposition in erg to erg-margin paleoenvironments. Detrital zircon populations from nearby Colorado Front Range outcrops and from 12 correlative eolian units are dominated by small, well-rounded Paleoproterozoic and Mesoproterozoic grain populations that are remarkably similar between units, signaling a well-mixed system that also received an influx of distally sourced sediment from the Appalachian orogen. Detrital zircon-based maximum depositional ages of the Lyons Sandstone and its equivalents are internally consistent with deposition of the unit during the latest Artinskian to Kungurian.

Colorado↗

Provenance of Devonian-Carboniferous strata of Colorado: The influence of the Cambrian and the Proterozoic

We report new LA-ICPMS U-Pb detrital zircon ages and sedimentary petrology of silty to sandy limestones and dolostones, as well as calcareous to dolomitic sandstones of the Devonian-Carboniferous (Mississippian) Chaffee Group, as well as detrital zircon ages from the Late Cambrian Sawatch Quartzite and a U-Pb zircon crystallization age on a late Mesoproterozoic (1087.9 13.5 Ma) granitoid of underlying basement from the Eagle basin of Colorado. Grain populations in the Chaffee Group are mostly bimodal, with over 84% of zircons centered around a Paleoproterozoic (ca. 1.78 Ga) mode typical of the Yavapai Province that forms much of the basement of Colorado and an early Mesoproterozoic (ca. 1.42 Ga) mode typical of A-type granites that intrude this region. A notable late Mesoproterozoic (ca. 1.08 Ga) mode exists in some Chaffee samples, giving those samples a trimodal detrital zircon age distribution. These bipartite or tripartite detrital zircon age modes exist in Cambrian, Devonian and Carboniferous strata from paleogeographically adjacent successions, but the correlation between the Chaffee zircons is highest with the regions basal Cambrian sandstones (Sawatch, Flathead, Ignacio formations) which have similar (1.08 Ga, 1.43 Ga, 1.71 Ga) zircon populations and a paucity of >1.8 Ga grains. This similarity suggests that the majority of grains in the Chaffee Group derive from recycling of these basal sandstones, and that little sediment was derived directly from then-exposed Precambrian basement highs, from the Wyoming Craton to the north, or from Paleoproterozoic arcs and orogens to the west and northeast. Minor Mesoarchean to early Paleoproterozoic (ca. 3.00 to 2.40 Ga) grains exist in the Chaffee Group, an attribute shared by the Late Ordovician Harding Sandstone of Colorados Front Range, but that is absent from the regions underlying Cambrian sandstonessuggesting some recycled mixture of Cambrian and Ordovician sedimentary rocks. No near-depositional age grains are present in the Chaffee Group; the youngest grain is Early Devonian (~417 Ma), >45 m.y. older than these strata, and Paleozoic grains are extremely uncommon (<0.1%; n=2927 grains).

Colorado↗

A shallow rift basin segmented in space and time: The southern San Luis Basin, Rio Grande rift, northern New Mexico, U.S.A.

Interpretation of gravity, magnetotelluric, and aeromagnetic data in conjunction with geologic constraints reveals details of basin geometry, thickness, and spatiotemporal evolution of the southern San Luis Basin, one of the major basins of the northern Rio Grande rift. Spatial variations of low-density basin-fill thickness are estimated primarily using a 3D gravity inversion method that improves on previous modeling efforts by separating the effects of the low-density basin fill from the effects of pre-rift rocks. The basin is found to be significantly narrower—and more complex in the subsurface—than indicated or implied by previous modeling efforts. The basin is also estimated to be significantly shallower than previously estimated. Five distinct subbasins are recognized within the broader southern San Luis Basin. The oldest and shallowest subbasin is the Las Mesitas graben along the northwestern basin margin, formed during the Oligocene transition from Southern Rocky Mountain volcanic field magmatism to rifting. In this subbasin, sediments are estimated to reach a maximum thickness of ~400 m within a north–south elongated structural depression. Other subbasins that likely initially developed during the Miocene are the dominant tectonic features in the southern San Luis Basin. This includes the Tres Orejas subbasin, which formed in the southwestern portion of the basin by the Embudo fault zone and a hypothesized fault zone along its western margin. This subbasin reaches a maximum thickness of ~2 km, as indicated by magnetotelluric and gravity modeling. The Sunshine Valley, Questa, and Taos subbasins occupy the eastern part of the southern San Luis Basin. The southern Sangre de Cristo fault zone is the dominant tectonic feature that controlled their development after ~20 Ma. The east-down Gorge fault zone controlled the western margins of significant parts of these eastern subbasins, although much of the Taos subbasin may be superimposed on the Tres Orejas subbasin. Maximum low-density basin-fill thicknesses are estimated to be 1.2 km for the Sunshine Valley subbasin, 800 m for the Questa subbasin, and 1.8 km for the Taos subbasin. Subbasin-forming tectonic activity along the Gorge fault zone and within the Tres Orejas subbasin ceased by the end of the development of the largely Pliocene Taos Plateau volcanic field. After that, rift-related subsidence became more narrowly centered on the eastern margin of the basin, controlled mainly by the linked Embudo and southern Sangre de Cristo fault zones.

New Mexico↗