USGS Science⌕ Search
Home/Archive/USGS

USGS · 70201641

Distribution of regional pressure in the onshore and offshore Gulf of Mexico basin, USA

Lauri A. Burke·Scott A. Kinney·Russell F. Dubiel·Janet K. Pitman
View original source ↗Export metadata ↓

Abstract

The U.S. Geological Survey (USGS) has created a comprehensive geopressure-gradient model of the regional pressure system spanning the onshore and offshore portions of the Gulf of Mexico, USA. The model was used to generate ten maps: five contour maps (Maps 1A - 5A) characterize the depth to the surface defined by the first occurrence of isopressure-gradients ranging from 0.60 psi/ft to 1.00 psi/ft, in 0.10-psi/ft increments, and five supporting maps (Maps 1B - 5B) display the spatial density of the data used to construct the isopressure-gradient maps. The boundary of the geopressure-gradient model represents the maximum extent of the calculated pressure-gradient data. The regional investigation, however, encompassed an area defined by the USGS Upper Jurassic-Cretaceous-Tertiary Composite Total Petroleum System Boundary, and the availability of offshore data. A description of the geopressure-gradient model, including related mathematical derivations, the data-quality control methodology, linear pressure interpolation calculations, and contouring algorithms is provided by Burke et al. (in press [a]; in press [b]); these references, as well as a summary of the geopressure-gradient model, are supplied in the online documentation .

Explore related subjects

Report
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 26.07652055985697° to 30.600093873550072° latitude; -97.6904296875° to -87.16552734375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lauri A. Burke, Scott A. Kinney, Russell F. Dubiel, Janet K. Pitman. 2012. Distribution of regional pressure in the onshore and offshore Gulf of Mexico basin, USA. https://pubs.usgs.gov/publication/70201641

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Factors affecting benthic macroinvertebrate health in the City of Roanoke, Virginia, 2020–2023

Major waterways in the City of Roanoke (City) have failed to meet Virginia’s aquatic life designated use since 1996. Segments of the upper Roanoke River lack healthy benthic macroinvertebrate communities which prompted a total maximum daily load (TMDL) study by the Virginia Department of Environmental Quality (VDEQ) to identify the most probable stressor(s) causing the impairment. Excess fine sediment was identified as the most probable stressor impairing benthic macroinvertebrates on portions of the Roanoke River in 2006, and a watershed implementation plan published in 2016 required communities within the impaired watershed to implement projects that would reduce the load of fine sediment entering the Roanoke River. Additional benthic macroinvertebrate sampling and stream habitat assessments along the Roanoke River and Tinker Creek (a tributary to the Roanoke River that flows through the City) revealed continued impaired conditions, and subsequent stressor identification analysis was completed in 2023. Samples collected downstream of the City on the Roanoke River and Tinker Creek generally showed more impaired conditions relative to samples collected at locations upstream of the City. Based on this evaluation, sediment and sediment-bound polychlorinated biphenyls (PCBs) were identified as probable stressors while specific conductance, total nitrogen, and sediment metals were possible stressors in Tinker Creek; however, only a sediment TMDL target was identified to address impaired benthic macroinvertebrate communities. In the Roanoke River upstream of the Niagara Dam, sediment and total phosphorus were identified as probable stressors, sediment polycyclic aromatic hydrocarbons and sediment PCB were considered possible stressors; however, the TMDL target was only for total phosphorus. The City partnered with the U.S. Geological Survey (USGS) in 2016 to continuously monitor water quality and streamflow conditions on a major tributary of Tinker Creek, Lick Run, and by 2020, four similar monitoring stations were installed on the Roanoke River and Tinker Creek near the locations of benthic macroinvertebrate sampling. Monitored parameters included streamflow and/or gage height (water level), water temperature, pH, dissolved oxygen, specific conductance, and turbidity. Turbidity is a measure of the relative clarity of the water and was previously used to model suspended-sediment concentrations at the monitoring stations. The City also contracted Kirk Environmental, LLP (KE) to collect benthic macroinvertebrate samples and stream habitat assessments near the locations of the water-quality monitoring stations. Identified benthic macroinvertebrates were used to calculate the Virginia Stream Condition Index (SCI), a multi-metric index composed of eight biological attributes that represent elements of the structure and function of the benthic macroinvertebrate community that measure diversity, composition, and tolerance to pollution. Study objective: In this report, benthic macroinvertebrate samples and stream habitat assessment scores collected at four locations on the Roanoke River and Tinker Creek by KE and the VDEQ between 2020 and 2023 were compared to measured water-quality and streamflow conditions prior to sampling to evaluate patterns between benthic macroinvertebrate health, water quality, and hydrology.

Virginia↗