USGS Science⌕ Search
Home/Archive/USGS

USGS · 70199755

Practical approaches to maximizing the resolution of sparker seismic reflection data

Jared W. Kluesner·Daniel S. Brothers·Patrick E. Hart·Nathaniel C. Miller·Gerry A. Hatcher
View original source ↗Export metadata ↓

Abstract

Sparkers are a type of sound source widely used by the marine seismic community to provide high-resolution imagery of the shallow sub-bottom (i.e., < 1000 m). Although sparkers are relatively simple, inexpensive, and high-frequency (100–2500 Hz) sources, they have several potential pitfalls due to their complicated and unpredictable signature. In this study we quantify the source characteristics of several sparker systems and develop a suite of simple processing approaches for both single channel and multi-channel sparker data. In all cases, the results show improved vertical resolution and reflection coherency. Correcting for small static variations in multi-channel seismic (MCS) data is a critical first step to preserve the broad frequency content during stacking, and to reduce the shot-to-shot variability of outgoing and incoming signals. Application of predictive deconvolution to static-corrected, post-stack traces suppresses short-path multiples and restores the latent high-resolution reflection patterns. However, if shot-to-shot source signatures are recorded directly, pre-stack deterministic deconvolution followed by post-stack predictive deconvolution produces the most robust results. Processing sparker data without broadband techniques results in less confident or completely missed interpretations when compared to the broadband equivalent. If processed correctly, marine sparker data can provide exceptional sub-bottom imagery that rivals other more repeatable marine seismic sources (e.g., high-frequency air-guns).

Explore related subjects

Marine Geophysical ResearchArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jared W. Kluesner, Daniel S. Brothers, Patrick E. Hart, Nathaniel C. Miller, Gerry A. Hatcher. 2018-09-20. Practical approaches to maximizing the resolution of sparker seismic reflection data. https://doi.org/10.1007/s11001-018-9367-2

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2010

Gravity modeling of the Muertos Trough and tectonic implications (north-eastern Caribbean)

The Muertos Trough in the northeast Caribbean has been interpreted as a subduction zone from seismicity, leading to infer a possible reversal subduction polarity. However, the distribution of the seismicity is very diffuse and makes definition of the plate geometry difficult. In addition, the compressive deformational features observed in the upper crust and sandbox kinematic modeling do not necessarily suggest a subduction process. We tested the hypothesized subduction of the Caribbean plate's interior beneath the eastern Greater Antilles island arc using gravity modeling. Gravity models simulating a subduction process yield a regional mass deficit beneath the island arc independently of the geometry and depth of the subducted slab used in the models. This mass deficit results from sinking of the less dense Caribbean slab beneath the lithospheric mantle replacing denser mantle materials and suggests that there is not a subducted Caribbean plateau beneath the island arc. The geologically more realistic gravity model which would explain the N-S shortening observed in the upper crust requires an overthrusted Caribbean slab extending at least 60 km northward from the deformation front, a progressive increase in the thrusting angle from 8?? to 30?? reaching a maximum depth of 22 km beneath the insular slope. This new tectonic model for the Muertos Margin, defined as a retroarc thrusting, will help to assess the seismic and tsunami hazard in the region. The use of gravity modeling has provided targets for future wide-angle seismic surveys in the Muertos Margin. ?? 2010 Springer Science+Business Media B.V.

Marine Geophysical Research↗
USGS2009

Late Pleistocene to Holocene sedimentation and hydrocarbon seeps on the continental shelf of a steep, tectonically active margin, southern California, USA

Small, steep, uplifting coastal watersheds are prolific sediment producers that contribute significantly to the global marine sediment budget. This study illustrates how sedimentation evolves in one such system where the continental shelf is largely sediment-starved, with most terrestrial sediment bypassing the shelf in favor of deposition in deeper basins. The Santa Barbara-Ventura coast of southern California, USA, is considered a classic area for the study of active tectonics and of Tertiary and Quaternary climatic evolution, interpretations of which depend upon an understanding of sedimentation patterns. High-resolution seismic-reflection data over >570 km 2 of this shelf show that sediment production is concentrated in a few drainage basins, with the Ventura and Santa Clara River deltas containing most of the upper Pleistocene to Holocene sediment on the shelf. Away from those deltas, the major factor controlling shelf sedimentation is the interaction of wave energy with coastline geometry. Depocenters containing sediment 5-20 m thick exist opposite broad coastal embayments, whereas relict material (bedrock below a regional unconformity) is exposed at the sea floor in areas of the shelf opposite coastal headlands. Locally, natural hydrocarbon seeps interact with sediment deposition either to produce elevated tar-and-sediment mounds or as gas plumes that hinder sediment settling. As much as 80% of fluvial sediment delivered by the Ventura and Santa Clara Rivers is transported off the shelf (some into the Santa Barbara Basin and some into the Santa Monica Basin via Hueneme Canyon), leaving a shelf with relatively little recent sediment accumulation. Understanding factors that control large-scale sediment dispersal along a rapidly uplifting coast that produces substantial quantities of sediment has implications for interpreting the ancient stratigraphic record of active and transform continental margins, and for inferring the distribution of hydrocarbon resources in relict shelf deposits.

Marine Geophysical Research↗
USGS2005

High-resolution surveys for geohazards and shallow gas: NW Adriatic (Italy) and Iskenderun Bay (Turkey)

The need for quantifying and understanding the distribution of shallow gas is both of academic interest and of relevance to offshore facilities. The combination of seafloor mapping, subbottom profiling, and multi-channel seismic data can provide information on regions of possible shallow gas, where the gas impacts the acoustic properties of the host material and the seafloor. In this paper, we present two case studies - one academic and one industry - that evaluate the distribution of shallow gas in two field areas in the Mediterranean. In the first case study, geophysical data from Iskenderun Bay, southeastern Turkey, indicate the presence and distribution of shallow gas. Pockmarks on the seafloor are associated with acoustic wipeout in the shallow subbottom data. Although deeper seismic data do not show bright spots or other indicators of possible gas, instantaneous frequency analysis clearly shows laterally restricted anomalies indicating gas-rich zones. The interpretation of possible shallow gas resulted in moving a proposed drilling location to a nearby area characterized by fewer (but still present) shallow gas signatures. In the second case study, cores acquired in the Po Delta, Adriatic Sea, provide quantitative ground-truthing of shallow gas - as suggested by geophysical data - and provide minimum estimates of the percentage of gas in the subsurface. Cores targeted on anomalous subbottom data yielded up to 41,000 ppm methane; cores with anomalous gas content are associated with thick recent flood deposits which may effectively isolate reactive terrigenous organic matter from biologic and physical re-working. ?? Springer 2005.

Marine Geophysical Research↗