USGS Science⌕ Search
Home/Archive/USGS

USGS · 70196382

Crop modeling applications in agricultural water management

Isaya Kisekka·Kendall C. DeJonge·Liwang Ma·Joel Paz·Kyle R. Douglas-Mankin
View original source ↗Export metadata ↓

Abstract

This article introduces the fourteen articles that comprise the “Crop Modeling and Decision Support for Optimizing Use of Limited Water” collection. This collection was developed from a special session on crop modeling applications in agricultural water management held at the 2016 ASABE Annual International Meeting (AIM) in Orlando, Florida. In addition, other authors who were not able to attend the 2016 ASABE AIM were also invited to submit papers. The articles summarized in this introductory article demonstrate a wide array of applications in which crop models can be used to optimize agricultural water management. The following section titles indicate the topics covered in this collection: (1) evapotranspiration modeling (one article), (2) model development and parameterization (two articles), (3) application of crop models for irrigation scheduling (five articles), (4) coordinated water and nutrient management (one article), (5) soil water management (two articles), (6) risk assessment of water-limited irrigation management (one article), and (7) regional assessments of climate impact (two articles). Changing weather and climate, increasing population, and groundwater depletion will continue to stimulate innovations in agricultural water management, and crop models will play an important role in helping to optimize water use in agriculture.

Explore related subjects

Transactions of the ASABEArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Isaya Kisekka, Kendall C. DeJonge, Liwang Ma, Joel Paz, Kyle R. Douglas-Mankin. 2017. Crop modeling applications in agricultural water management. https://doi.org/10.13031/trans.12693

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2019

The potential resiliency of a created tidal marsh to sea-level rise

The purpose of this study was to determine the elevation dynamics of a created tidal marsh on the North Carolina coast. Deep rod surface elevation tables (RSET) and feldspar marker horizons (MH) were installed in plots to measure net surface elevation changes and to quantify contributing processes. Twelve total plots were placed on four elevation gradient transects (three transects within the created marsh and one within a reference marsh) with three plots along each transect. Elevation gradient transects included a low marsh plot dominated by Spartina alterniflora, a middle marsh plot dominated by Juncus roemerianus, and a high marsh plot dominated by Spartina patens. RSET and MH measurements were taken in December 2012, January 2014, April 2017, and March 2018. Elevation change ranged from 0.7 to 4.0 mm yr -1 within the created marsh and -0.6 to 2.1 mm yr -1 within the reference marsh. When compared to the long-term linear trend in local relative sea level rise (RSLR) of 3.10 +/- 0.35 mm yr -1 , the middle marsh plots within the created marsh trended toward survival with an observed elevation increase of 3.1 +/- 0.2 mm yr -1 . Alternatively, the low and high marsh plots within the created marsh trended towards submergence with observed elevation increases of 2.1+/- 0.2 and 1.3 +/- 0.2 mm yr -1 , respectively. These results indicate that a created marsh can display elevation dynamics similar to natural marshes. Surface elevation changes were observed over a short time period and in a relatively young marsh, so it is uncertain if these trends will continue or how the longer-term relationship with RSLR will develop. While this study provided the initial data on the ability of created tidal marshes to respond to observed sea-level rise, long-term observations will be continued to evaluate long-term elevation dynamics.

North Carolina↗
USGS2018

Advances in drainage: Selected works from the Tenth International Drainage Symposium

This article introduces a special collection of fourteen articles accepted from among the 140 technical presentations, posters, and meeting papers presented at the 10th International ASABE Drainage Symposium. The symposium continued in the tradition of previous symposia that began in 1965 as a forum for presenting and assessing the progress of drainage research and implementation throughout the world. The articles in this collection address a wide range of topics grouped into five broad categories: (1) crop response, (2) design and management, (3) hydrology and scale, (4) modeling, and (5) water quality. The collection provides valuable information for scientists, engineers, planners, and others working on crop production, water quality, and water quantity issues affected by agricultural drainage. The collection also provides perspectives on the challenges of increasing agricultural production in a changing climate, with ever-greater attention to water quality and quantity concerns that will require integrated technical, economic, and social solutions.

Transactions of the ASABE↗
USGS2018

Review and development of ASABE Engineering Practice 621: “Guidelines for calibrating, validating, and evaluating hydrologic and water quality models”

In 2010, the Natural Resources and Environmental Systems Hydrology Committee (NRES-21) of ASABE initiated a long-term process to develop guidelines to improve modeling practice through better understanding of the calibration, validation, and evaluation process across applications and more effective interpretation and communication of model performance. This effort generated a compilation of 23 articles with model-specific descriptions and guidance (2012), a position paper outlining guidance for evaluating, interpreting, and communicating performance of hydrologic and water quality models considering intended use (2014), and a compilation of ten articles addressing key topics related to model calibration and validation (2015). In 2016, the first draft of ASABE Engineering Practice 621 (EP621), “Guidelines for Calibrating, Validating, and Evaluating Hydrologic and Water Quality (H/WQ) Models,” was developed, subsequently revised, and ultimately approved by the ASABE Standards Committee in 2017. EP621 provides guidelines, not prescriptive requirements, and as such recommends “good” modeling practices to enhance calibration, validation, evaluation, and communication of H/WQ models through establishment of consistent terminology; model selection; compilation and processing of input data and calibration, validation, and evaluation data; determination of model performance measures; model parameterization and calibration; re-examination of input and calibration data and/or consideration of model refinement; re-evaluation of model performance; and documentation of modeling process and results. EP621 can be obtained from the ASABE Technical Library at https://elibrary.asabe.org/abstract.asp?aid=47804. The objectives of this technical note are to review the process and rationale used to develop EP621 and to briefly summarize its major components.

Transactions of the ASABE↗