USGS Science⌕ Search

USGS · 70189673

Working group on future trends

Abstract

This working group did not divide into subgroups, and its report consists of a unified document in a format somewhat different than those of the other working groups. The group considered four major topics: (1) projected "new" contaminants of future concern; (2) future trends with contaminants currently known to be issues for marine mammals; (3) future needs to improve and insure consistency of sample collection and analyses; and (4) future management needs. The problems of persistent organic pollutants will remain well into the foreseeable future. A general decline in levels of persistent organic pollutants in the marine environment is not anticipated. there is every likelihood that the environmental trends of halogenated organic compounds, such as polybromated diphenyl ethers and chlorinated paraffins, will parallel production trends, as demonstrated with well known chemical contaminants such as PCBs (polychlorinated biphenyls) and DDT (dichlorodiphenyltrichloroethane). While the environmental levels of some compounds may be slowly declining, many are still within the ranges where subtle toxic effects are to be anticipated. Trends in contaminants must be placed in a regional context, and rates and directions of change are often region-specific. For example, in the Southern Hemisphere the concentrations of PCBs appear to be increasing. The rates of change of many contaminants in the Southern hemisphere are poorly known, and this region may be at future risk. Much of the research on contaminants and marine mammals has focused on the problem of persistent organochloride chemicals such as PCBs and DDT, which are a continuing and global problem. Potential problems caused by other persistent, toxic, and bioaccumulative substances (PTBSs) cannot currently be addressed due to the lack of basic information on their production, use, exposure, and effects (Environmental Protection Agency 1998). It is currently estimated that there are roughly 2400 lipophilic and persistent chemicals, of which 390 are PTBSs. In order to prevent long-term pollution from these largely unknown chemicals, chemical industries should disclose basic information on such compounds, and this information should be made widely available. This will require enhanced international cooperation, preferably within the existing framework of chemical contaminant programs, such as the Existing Chemicals Program of the Organization for Economic Cooperation and Development (1991) and the Program on persistent Organic Pollutants of the United National Environmental Programme (1998). Monitoring studies are essential to the description and understanding of pollutants. It is necessary to exploit existing analytical techniques to identify as many anthropogenic compounds as possible in marine mammal tissues in order to expand the identification of existing and new chemicals that accumulate in, and pose threats to, these species.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Working Group Members: Fair, Geraci (Leader), Goldberg, Jarman, Kucklick (Rapporteur), Krahn, Muir, Norstrom, Phinney, Tanabe, van Leeuwen, York. 1999. Working group on future trends. https://pubs.usgs.gov/publication/70189673

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗