USGS ScienceSearch

USGS · 70178126

Cretaceous–Cenozoic burial and exhumation history of the Chukchi shelf, offshore Arctic Alaska

Abstract

Apatite fission track (AFT) and vitrinite reflectance data from five exploration wells and three seafloor cores illuminate the thermal history of the underexplored United States Chukchi shelf. On the northeastern shelf, Triassic strata in the Chevron 1 Diamond well record apatite annealing followed by cooling, possibly during the Triassic to Middle Jurassic, which is a thermal history likely related to Canada Basin rifting. Jurassic strata exhumed in the hanging wall of the frontal Herald Arch thrust fault record a history of probable Late Jurassic to Early Cretaceous structural burial in the Chukotka fold and thrust belt, followed by rapid exhumation to near-surface temperatures at 104 ± 30 Ma. This history of contractional tectonism is in good agreement with inherited fission track ages in low-thermal-maturity, Cretaceous–Cenozoic strata in the Chukchi foreland, providing complementary evidence for the timing of exhumation and suggesting a source-to-sink relationship. In the central Chukchi foreland, inverse modeling of reset AFT samples from the Shell 1 Klondike and Shell 1 Crackerjack wells reveals several tens of degrees of cooling from maximum paleo-temperatures, with maximum heating permissible at any time from about 100 to 50 Ma, and cooling persisting to as recent as 30 Ma. Similar histories are compatible with partially reset AFT samples from other Chukchi wells (Shell 1 Popcorn, Shell 1 Burger, and Chevron 1 Diamond) and are probable in light of regional geologic evidence. Given geologic context provided by regional seismic reflection data, we interpret these inverse models to reveal a Late Cretaceous episode of cyclical burial and erosion across the central Chukchi shelf, possibly partially overprinted by Cenozoic cooling related to decreasing surface temperatures. Regionally, we interpret this kinematic history to be reflective of moderate, transpressional deformation of the Chukchi shelf during the final phases of contractional tectonism in the Chukotkan orogen (lasting until ∼70 Ma), followed by renewed subsidence of the Chukchi shelf in the latest Cretaceous and Cenozoic. This history maintained modest thermal maturities at the base of the Brookian sequence across the Chukchi shelf, because large sediment volumes bypassed to adjacent depocenters. Therefore, the Chukchi shelf appears to be an area with the potential for widespread preservation of petroleum systems in the oil window.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 64° to 75° latitude; -175° to -165° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

William H. Craddock, David W. Houseknecht. 2016. Cretaceous–Cenozoic burial and exhumation history of the Chukchi shelf, offshore Arctic Alaska. https://doi.org/10.1306/09291515010

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Compression behavior of hydrate-bearing sediments

This work experimentally explores porosity, compressibility, and the ratio of horizontal to vertical effective stress ( K 0 ) in hydrate-bearing sandy silts from Green Canyon Block 955 in the deep-water Gulf of Mexico. The samples have an in situ porosity of 0.38 to 0.40 and a hydrate saturation of more than 80%. The hydrate-bearing sediments are stiffer than the equivalent hydrate-free sediments; the K 0 stress ratio is greater for hydrate-bearing sediments relative to the equivalent hydrate-free sediments. The porosity decreases by 0.01 to 0.02 when the hydrate is dissociated at the in situ effective stress. We interpret that the hydrate in the sediment pores is a viscoelastic material that behaves like a fluid over experimental time scales, yet it cannot escape the sediment skeleton. During compression, the hydrate bears a significant fraction of the applied vertical load and transfers this load laterally, resulting in the apparent increased stiffness and a larger apparent K 0 stress ratio. When dissociation occurs, the load carried by the hydrate is transferred to the sediment skeleton, resulting in further compaction and a decrease in the lateral stress. The viewpoint that the hydrate is a trapped viscous phase provides a mechanism for how stiffness and stress ratio ( K 0 ) are greater when hydrate is present in the porous media. This study provides insight into the initial stress state of hydrate-bearing reservoirs and the geomechanical evolution of these reservoirs during production.

Louisiana

Geologic models underpinning the 2018 US Geological Survey assessment of hydrocarbon resources in the Eagle Ford Group and associated Cenomanian–Turonian strata, United States Gulf Coast, Texas

The availability of new geologic and production data has greatly increased since 2010, when the US Geological Survey (USGS) last assessed undiscovered, technically recoverable oil and gas resources in the Cenomanian–Turonian (CT) Eagle Ford Group (EFG) across Texas. This new information facilitated an updated assessment of undiscovered continuous oil and gas resources in the Eagle Ford and associated CT strata. Literature and USGS research data were used to build the geologic models for the assessment units (AUs). The USGS defined six continuous AUs within the EFG: (1) Eagle Ford Marl Continuous Oil, (2) Eagle Ford Marl Continuous Gas, (3) Submarine Plateau-Karnes Trough Continuous Oil, (4) Submarine Plateau-Karnes Trough Continuous Gas, (5) CT Mudstone Continuous Oil, and (6) CT Mudstone Continuous Gas. An additional AU, the CT Slope Continuous Gas AU, was defined but not quantitatively assessed. The boundaries of these AUs were defined by thickness, lithofacies, thermal maturity, regional geology, and the spatial distribution of productive fairways. The resulting total mean estimates for undiscovered, technically recoverable resources for these six AUs are 8.5 billion bbl of oil and 66 trillion ft 3 of gas. These results for both oil and gas resources are within the top five volumes of previously assessed continuous accumulations in the United States and attest to the importance of the EFG and associated CT strata as a significant source of petroleum well into the future.

Texas

Comprehensive pressure core analysis for hydrate-bearing sediments from Gulf of Mexico Green Canyon Block 955, including assessments of geomechanical viscous behavior and nuclear magnetic resonance permeability

Quantifying the petrophysical and geomechanical properties of gas hydrate reservoirs is essential for understanding the natural hydrate system and predicting gas production behavior for future resource development. Pressure-core analysis tools were used to characterize methane hydrate–bearing sediments recovered from the Gulf of Mexico Green Canyon Block 955, under an international collaboration with The University of Texas and the National Institute of Advanced Industrial Science and Technology. Pressure-core samples were successfully transferred from Austin, Texas to Sapporo, Japan. Index property measurements (grain size, grain density, hydration number, gas composition, thermal conductivity), along with triaxial compression, consolidation, and permeability tests with a nuclear magnetic resonance (NMR) analyzer were conducted. Compression tests at different strain rates confirmed a strain rate dependence for hydrate-bearing sediment, and an equation for predicting strength as a function of hydrate saturation and strain rate is proposed. Compression and swelling indices were obtained from high-effective stress consolidation tests. Furthermore, secondary compression coefficients for hydrate-bearing sediments were obtained, suggesting that hydrate exhibits creeping behavior on timescales of minutes to hours. A relatively high initial permeability of a few millidarcys was confirmed. In addition, the first NMR signal measurement was performed on a hydrate-bearing pressure core to acquire the NMR transverse or spin-spin ( T 2 ) distribution. Results confirm that the Schlumberger Doll Research model and Timur-Coates model predictions underestimate permeability measured directly via fluid flow. Permeability estimated using specific surface values derived from NMR T 2 distributions is in good agreement with flow test results. Finally, an extended Timur-Coates model was proposed and predicts intrinsic permeability with high accuracy.

Texas