Sedimentology of Southwestern Roads region, U.S. Virgin Islands: origin and rate of sediment accumulation

Jack L. Kindinger; Ronald J. Miller; Charles W. Holmes

doi:10.1306/212f8201-2b24-11d7-8648000102c1865d

Home/Archive/USGS

USGS · 70135755

Sedimentology of Southwestern Roads region, U.S. Virgin Islands: origin and rate of sediment accumulation

Jack L. Kindinger·Ronald J. Miller·Charles W. Holmes

View original source ↗Export metadata ↓

Abstract

Sand deposits on southern insular shelf of St. Thomas, U.S. Virgin Islands, were investigated to determine their origin, environmental processes and accumulation rates. Sea-floor samples show that the sand has been derived (in situ) mainly from calcareous algae and molluscs. Zonation of the dominant sand producers is related to the present environmental setting; water depth has the greatest influence. Carbon-14 data (bulk sample) of cores indicate accumulation rates of slightly less than 1 mm/year for the last 5,000 years. Faunal studies show that the climate has remained constant over the past 5,000 years. The only changes in environmental conditions appear to have been an increase in water depth, changes in the patterns of water movement, and an increase in water temperature.

Explore related subjects

Journal of Sedimentary Research Article

Source-reported bounding extent: 17.602139123350852° to 17.921249418623304° latitude; -65.00335693359375° to -64.5172119140625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Jack L. Kindinger, Ronald J. Miller, Charles W. Holmes. 1983. Sedimentology of Southwestern Roads region, U.S. Virgin Islands: origin and rate of sediment accumulation. https://doi.org/10.1306/212f8201-2b24-11d7-8648000102c1865d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

An integrated mudstone facies classification scheme and revised interpretation of the sedimentologic processes driving carbon burial in the Cenomanian–Turonian Greenhorn Formation, Colorado, U.S.A.

Standardizing facies descriptions has proven key to integrating interpretations of depositional processes and environments from sedimentologic observations with geochemistry data for mudstone lithologies. Because of their fine-grained nature, high degree of compaction, and heterogeneous composition, standardizing methods for mudstone descriptions has proven difficult, but it is critical to formulating meaningful interpretations of the processes that govern the accumulation of organic-rich lithologies and their role in both petroleum systems and the global carbon cycle. In this study, we have developed a modified facies classification scheme for mudstone lithologies that incorporates sedimentologic and compositional observation at the hand-sample and thin-section scales with geochemical measurements, including bulk organic and inorganic geochemistry, to characterize these rocks and their variability more completely for improved interpretations of depositional environments during a low-order sea-level transgression. The facies described in this study are of the Cenomanian–Turonian Greenhorn Formation in the USGS #1 Portland Core drilled in Fremont County, Colorado. Strata of the Greenhorn Formation span Oceanic Anoxic Event 2 (OAE-2) and the preceding interval. Lithologies range from organic-rich argillaceous mudstones with varied sedimentary structures to organic-lean, highly bioturbated limestones. Six facies were identified, each differentiated by varied sedimentary structures and geochemical composition. These facies occur in a predictable stratigraphic stacking pattern that represents a low-order sea-level transgression with interpreted depositional environments ranging from terrigenous-dominated pro-delta and muddy continental shelf at the base of the interval to pelagic offshore marine at the top of the Greenhorn Formation. Though the facies are consistent with previous interpretations of depositional environments at this locale in the Cretaceous Western Interior Seaway during the Greenhorn cyclothem, the sedimentary processes governing the accumulation of organic-rich strata that have defined this interval are significantly revised. Variability in the proximity and intensity of bottom currents driven by storms and geostrophic flows were key to the accumulation of each facies, with significant sediment transport occurring even through deposition in the most oxygen-depleted bottom waters. The methodology and interpretations provided here are now being employed to basin-scale predictions of organic enrichment utilizing calibrated petrophysical methods. The approach and results from this study improve understanding of how organic and inorganic carbon was sequestered during perturbations to the global carbon cycle associated with events such as OAE-2.

Colorado↗

USGS2025

Reevaluating the depositional model of the Cenomanian–Turonian Bridge Creek Limestone Member near Pueblo, Colorado, U.S.A.: Roles of changing sedimentation rate on the formation of limestone–marl bedding couplets

Although interbedded limestone–marl couplets in many hemipelagic and pelagic deposits have been commonly attributed to orbital-driven climate cycles, the driving mechanisms of these couplets remain largely controversial. This situation arises from the fact that detailed sedimentologic and petrographic facies characteristics of these fine-grained deposits have rarely been examined closely. In this study we conduct an integrated sedimentologic and petrographic analysis to disentangle causes of the limestone–marl bedding couplets in the Cenomanian–Turonian Bridge Creek Limestone Member (BCL) of the Greenhorn Formation using cores and outcrop near Pueblo, Colorado. By integrating existing geochemical datasets, each of the three general lithologies in the BCL including limestone, marl, and calcareous mudstone can be divided into two facies, a more bioturbated vs. a more laminated facies, in addition to bentonite beds. The variability in sedimentary, bioturbation, and petrographic characteristics of different sedimentary facies types, as well as constraints from the existing orbital time scale, in the BCL indicate changes in sediment accumulation rate or the amount of time recorded by different facies—the limestone, marl, and calcareous facies are interpreted to reflect increasing sedimentation rate. The sedimentary and petrographic facies variations, including but not limited to lithological alternations, in the BCL are interpreted to result from the combined influence of various processes such as bottom currents, bioturbation, early diagenesis, and episodic volcanic input, with some of the above-mentioned processes likely modulated by short-term relative changes in sea level. Results of this study highlight the need for detailed sedimentologic and petrographic studies and consideration of short-term changes in sedimentation rate to fully resolve the causes of the apparent limestone–marl bedding couplets and reliably reconstruct short-term changes in depositional and environmental conditions from the BCL and other similar successions.

Colorado↗

USGS2024

Insights into glendonite formation from the upper Oligocene Sagavanirktok Formation, North Slope, Alaska

The type locality for the upper Oligocene Nuwok Member of the Sagavanirktok Formation (Carter Creek, North Slope, Alaska, USA) contains abundant occurrence of glendonite, a pseudomorph after the calcium carbonate mineral ikaite, which typically forms in the shallow subsurface of cold marine sediments. The region during the time of Nuwok Member deposition was located at a high latitude, similar to today, and the study site is characterized by sands and silty muds interpreted here to have been deposited in coastal and shelfal marine environments. Isotopic (Sr) and biostratigraphic (foraminifera) evidence presented here refine the depositional age of the outcrop to approximately 24 Ma. Glendonites occur in two basic forms: radial clusters, commonly centered around a single larger primary crystal ( approx. 10 cm; Type A) and larger single blades generally without accessory crystals (approx. 15–25 cm; Type B). Microscopic examination revealed a sequence of multiple types of replacive calcite that formed as a direct result of ikaite transformation: Type 1 rhombohedral crystals characterized by microporous and inclusion-rich cores and concentric zones, Type 2A, composed of clear calcite that overgrew and augmented Type 1 crystals, and inclusion-rich, microcrystalline Type 2B, which formed a matrix surrounding the rhombs and commonly dominates the outer rims of glendonite specimens. Type 3 calcite precipitated as fibrous, botryoidal epitaxial cement atop previous phases and is not ikaite-derived. These phases are distributed in similar ways in all examined specimens and are consistent with several previously described glendonite occurrences around the world, despite differing diagenetic and geologic histories. Stable isotope evidence (δ13C and δ18O) suggests sourcing of glendonite carbon from both organic and methanogenic sources. Glendonites of the Nuwok Member can therefore assist in the determination of a more comprehensive ikaite transformation model, improving our understanding of glendonite formation and the sedimentological and environmental context of their occurrence. Oligocene glendonites are uncommon globally; the well-preserved occurrence described here can allow future studies to better reconstruct Arctic environmental conditions and paleoclimates during this time.

Alaska↗