USGS ScienceSearch

USGS · 70121288

Geophysical observations on northern part of Georges Bank and adjacent basins of Gulf of Maine

Abstract

Continuous-seismic-reflection and magnetic-intensity profiles provide data for inferences about the geology of the northern part of Georges Bank and the basins of the Gulf of Maine adjacent to the bank. Basement is inferred to be mostly sedimentary and volcanic rocks of Paleozoic age that were metamorphosed and intruded locally by felsic and mafic plutons near the end of the Paleozoic Era. During Late Triassic time, large fault basins formed within the Gulf of Maine and probably beneath Georges Bank. The fault basins and a possible major northeast-trending fault zone beneath the northern part of the bank probably formed as a result of the opening Atlantic during the Mesozoic. Nonmarine sediments, associated with mafic flows and intrusive rocks, were deposited in the fault basins as they formed. The upper surface of the Triassic and pre-Triassic rocks that comprise basement is an unconformity that makes up much of the bottom of the Gulf of Maine. Depth to the basement surface beneath the gulf differ greatly because of fluvial erosion in Tertiary time and glacial erosion in Pleistocene time. Beneath the northern part of Georges Bank the basement surface is smoother and slopes southward. Prominent valleys, cut before Late Cretaceous time, are present beneath this part of the bank. Cretaceous, Tertiary, and possibly Jurassic times were characterized by episodes of coastal-plain deposition and fluvial erosion. During this time a very thick wedge of sediment, mostly of Jurassic(?) and Cretaceous ages, was deposited on the shelf. Major periods of erosion took place at the close of the Cretaceous and during the Pliocene. Fluvial erosion during the Pliocene removed much of the coastal-plain sedimentary wedge and formed the Gulf of Maine. Pleistocene glaciers eroded all but a few remnants of the coastal-plain sediments within the gulf and deposited a thick section of drift against the north slope of Georges Bank and a thin veneer of outwash on the bank. Marine sediments were deposited in the basins of the Gulf of Maine during the retreat of the last ice and the postglacial rise in sea level.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 40° to 42° latitude; -69° to -60° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R. N. Oldale, J.C. Hathaway, William P. Dillon, J. D. Hendricks, James M. Robb. 1974. Geophysical observations on northern part of Georges Bank and adjacent basins of Gulf of Maine. https://doi.org/10.1306/83d91bc3-16c7-11d7-8645000102c1865d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Compression behavior of hydrate-bearing sediments

This work experimentally explores porosity, compressibility, and the ratio of horizontal to vertical effective stress ( K 0 ) in hydrate-bearing sandy silts from Green Canyon Block 955 in the deep-water Gulf of Mexico. The samples have an in situ porosity of 0.38 to 0.40 and a hydrate saturation of more than 80%. The hydrate-bearing sediments are stiffer than the equivalent hydrate-free sediments; the K 0 stress ratio is greater for hydrate-bearing sediments relative to the equivalent hydrate-free sediments. The porosity decreases by 0.01 to 0.02 when the hydrate is dissociated at the in situ effective stress. We interpret that the hydrate in the sediment pores is a viscoelastic material that behaves like a fluid over experimental time scales, yet it cannot escape the sediment skeleton. During compression, the hydrate bears a significant fraction of the applied vertical load and transfers this load laterally, resulting in the apparent increased stiffness and a larger apparent K 0 stress ratio. When dissociation occurs, the load carried by the hydrate is transferred to the sediment skeleton, resulting in further compaction and a decrease in the lateral stress. The viewpoint that the hydrate is a trapped viscous phase provides a mechanism for how stiffness and stress ratio ( K 0 ) are greater when hydrate is present in the porous media. This study provides insight into the initial stress state of hydrate-bearing reservoirs and the geomechanical evolution of these reservoirs during production.

Louisiana

Geologic models underpinning the 2018 US Geological Survey assessment of hydrocarbon resources in the Eagle Ford Group and associated Cenomanian–Turonian strata, United States Gulf Coast, Texas

The availability of new geologic and production data has greatly increased since 2010, when the US Geological Survey (USGS) last assessed undiscovered, technically recoverable oil and gas resources in the Cenomanian–Turonian (CT) Eagle Ford Group (EFG) across Texas. This new information facilitated an updated assessment of undiscovered continuous oil and gas resources in the Eagle Ford and associated CT strata. Literature and USGS research data were used to build the geologic models for the assessment units (AUs). The USGS defined six continuous AUs within the EFG: (1) Eagle Ford Marl Continuous Oil, (2) Eagle Ford Marl Continuous Gas, (3) Submarine Plateau-Karnes Trough Continuous Oil, (4) Submarine Plateau-Karnes Trough Continuous Gas, (5) CT Mudstone Continuous Oil, and (6) CT Mudstone Continuous Gas. An additional AU, the CT Slope Continuous Gas AU, was defined but not quantitatively assessed. The boundaries of these AUs were defined by thickness, lithofacies, thermal maturity, regional geology, and the spatial distribution of productive fairways. The resulting total mean estimates for undiscovered, technically recoverable resources for these six AUs are 8.5 billion bbl of oil and 66 trillion ft 3 of gas. These results for both oil and gas resources are within the top five volumes of previously assessed continuous accumulations in the United States and attest to the importance of the EFG and associated CT strata as a significant source of petroleum well into the future.

Texas

Comprehensive pressure core analysis for hydrate-bearing sediments from Gulf of Mexico Green Canyon Block 955, including assessments of geomechanical viscous behavior and nuclear magnetic resonance permeability

Quantifying the petrophysical and geomechanical properties of gas hydrate reservoirs is essential for understanding the natural hydrate system and predicting gas production behavior for future resource development. Pressure-core analysis tools were used to characterize methane hydrate–bearing sediments recovered from the Gulf of Mexico Green Canyon Block 955, under an international collaboration with The University of Texas and the National Institute of Advanced Industrial Science and Technology. Pressure-core samples were successfully transferred from Austin, Texas to Sapporo, Japan. Index property measurements (grain size, grain density, hydration number, gas composition, thermal conductivity), along with triaxial compression, consolidation, and permeability tests with a nuclear magnetic resonance (NMR) analyzer were conducted. Compression tests at different strain rates confirmed a strain rate dependence for hydrate-bearing sediment, and an equation for predicting strength as a function of hydrate saturation and strain rate is proposed. Compression and swelling indices were obtained from high-effective stress consolidation tests. Furthermore, secondary compression coefficients for hydrate-bearing sediments were obtained, suggesting that hydrate exhibits creeping behavior on timescales of minutes to hours. A relatively high initial permeability of a few millidarcys was confirmed. In addition, the first NMR signal measurement was performed on a hydrate-bearing pressure core to acquire the NMR transverse or spin-spin ( T 2 ) distribution. Results confirm that the Schlumberger Doll Research model and Timur-Coates model predictions underestimate permeability measured directly via fluid flow. Permeability estimated using specific surface values derived from NMR T 2 distributions is in good agreement with flow test results. Finally, an extended Timur-Coates model was proposed and predicts intrinsic permeability with high accuracy.

Texas