Evaluation of new spectral bands for multi-spectral imaging: SMIRR aircraft test results

Alexander F.H. Goetz; Lawrence C. Rowan

Home/Archive/USGS

USGS · 70112903

Evaluation of new spectral bands for multi-spectral imaging: SMIRR aircraft test results

Alexander F.H. Goetz·Lawrence C. Rowan

View original source ↗Export metadata ↓

Abstract

A 10-channel radiometer called the Shuttle Multispectral Infrared Radiometer (SMIRR) is scheduled to take data from orbit on the second shuttle orbital light test. As part of the instrument test sequence, a series of aircraft flights was carried out over 10 test areas in Utah and Nevada. Apart from vegetation, the materials exposed at the surface were volcanic sequences ranging from tuffs to basalts, areas of hydrothermally altered volcanic rocks, sedimentary sequences of sandstone and carbonate rocks, and alluvial cover.

Explore related subjects

Sixth Annual Pecora Symposium and Exposition Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Alexander F.H. Goetz, Lawrence C. Rowan. 1980. Evaluation of new spectral bands for multi-spectral imaging: SMIRR aircraft test results. https://pubs.usgs.gov/publication/70112903

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1980

Airborne Fraunhofer line discriminator (FLD) luminescence imaging systems and its application to exploration problems

Experiments with an imaging airborne Fraunhofer line discriminator (FLD) are being conducted to establish the feasibility of delineating the areal extent of luminescent materials on the earth's surface from aircraft and spacecraft. All luminescence measurements are related to a standard set of conditions with rhodamine wt dye used as a reference standard. The FLD has a minimum detectable rhodamine wt concentration of 0.1 parts per billion (ppb) at a signal-to-noise ratio of 5.0. Luminescence, when expressed in a signal-to-noise ratio (R) is related to equivalent ppb rhodamine wt through the relationship ppb=(0.1R-0.4). Luminescent materials imaged from an aircraft altitude of approximately 2400 m above terrain include fluorite in association with molybdenum, Pinenut Mountains, Nevada (R=62.0); mineralized playas, Claunch, New Mexico (R=960.0); uranium and vanadium-bearing outcrops, Big Indian Valley, Utah (R=105.0); uranophane sandstones, Sandia Mountains, New Mexico (R=60.0); phosphate outcrops, Pine Mountain, California (R=76.0); and marine oil slicks, Santa Barbara Channel, California (R=24.0). Correlation between the amount of fluorite in the rocks and soils of the Pinenut Mountains and luminescence, measured by the FLD, is as high as 0.88 at the 95 percent confidence level.

Sixth Annual Pecora Symposium and Exposition↗

USGS1980

Digital mapping of limonitic rocks by using Landsat MSS radio data

Color-ratio composite images of Landsat MSS (multi-spectral scanner) bands have been used by other workers to map the distribution of limonitic rocks in semi-arid and arid areas as possible indicators of hydrothermal alteration (Rowan et al, 1974). The images are particularly useful for broad overviews, but detailed analysis at large scales requires both numerical analysis of the ratio values to distinguish consistently among categories of limonitic rocks and a precise transfer of the data to large-scale base maps. Both requirements can be met by digital classification followed by a precise geometric registration of the classified data.

Sixth Annual Pecora Symposium and Exposition↗

USGS1980

Interpretation of long- and short-wavelength magnetic anomalies

Magset was launched on October 30, 1979. More than a decade of examining existing data, devising appropriate models of the global magnetic field, and extending methods for interpreting long-wavelength magnetic anomalies preceded this launch Magnetic data collected by satellite can be interrupted by using a method of analysis that quantitively describes the magnetic field resulting from three-dimensional geologic structures that are bounded by an arbitrary number of polygonal faces, Each face my have any orientation and three or more sides. At each point of the external field, the component normal to each face is obtained by using an expression for the solid angle subtended by a generalized polygon. The "cross" of tangential components are relatively easy to obtain for the same polygons. No approximations have been made related to orbit height that restrict the dimensions of the polygons relative to the distance from the external field points. This permits the method to be used to model shorter wavelength anomalies obtained from aircraft or ground surveys. The magnetic fields for all the structures considered are determine in the same rectangular coordinate system. The coordinate system is in depended from the orientation of geologic trends and permits multiple structures or bodies to be included in the same magnetic field calculations. This single reference system also simplified adjustments in position and direction to account for earth curvature in regional interpretation.

Sixth Annual Pecora Symposium and Exposition↗