USGS Science⌕ Search
Home/Archive/USGS

USGS · 70037818

Implementation of the vortex force formalism in the coupled ocean-atmosphere-wave-sediment transport (COAWST) modeling system for inner shelf and surf zone applications

Nirnimesh Kumar·George Voulgaris·John C. Warner·Maitane Olabarrieta
View original source ↗Export metadata ↓

Abstract

The coupled ocean-atmosphere-wave-sediment transport modeling system (COAWST) enables simulations that integrate oceanic, atmospheric, wave and morphological processes in the coastal ocean. Within the modeling system, the three-dimensional ocean circulation module (ROMS) is coupled with the wave generation and propagation model (SWAN) to allow full integration of the effect of waves on circulation and vice versa. The existing wave-current coupling component utilizes a depth dependent radiation stress approach. In here we present a new approach that uses the vortex force formalism. The formulation adopted and the various parameterizations used in the model as well as their numerical implementation are presented in detail. The performance of the new system is examined through the presentation of four test cases. These include obliquely incident waves on a synthetic planar beach and a natural barred beach (DUCK' 94); normal incident waves on a nearshore barred morphology with rip channels; and wave-induced mean flows outside the surf zone at the Martha's Vineyard Coastal Observatory (MVCO). Model results from the planar beach case show good agreement with depth-averaged analytical solutions and with theoretical flow structures. Simulation results for the DUCK' 94 experiment agree closely with measured profiles of cross-shore and longshore velocity data from and . Diagnostic simulations showed that the nonlinear processes of wave roller generation and wave-induced mixing are important for the accurate simulation of surf zone flows. It is further recommended that a more realistic approach for determining the contribution of wave rollers and breaking induced turbulent mixing can be formulated using non-dimensional parameters which are functions of local wave parameters and the beach slope. Dominant terms in the cross-shore momentum balance are found to be the quasi-static pressure gradient and breaking acceleration. In the alongshore direction, bottom stress, breaking acceleration, horizontal advection and horizontal vortex forces dominate the momentum balance. The simulation results for the bar/rip channel morphology case clearly show the ability of the modeling system to reproduce horizontal and vertical circulation patterns similar to those found in laboratory studies and to numerical simulations using the radiation stress representation. The vortex force term is found to be more important at locations where strong flow vorticity interacts with the wave-induced Stokes flow field. Outside the surf zone, the three-dimensional model simulations of wave-induced flows for non-breaking waves closely agree with flow observations from MVCO, with the vertical structure of the simulated flow varying as a function of the vertical viscosity as demonstrated by Lentz et al. (2008).

Explore related subjects

Ocean ModellingArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Nirnimesh Kumar, George Voulgaris, John C. Warner, Maitane Olabarrieta. 2012. Implementation of the vortex force formalism in the coupled ocean-atmosphere-wave-sediment transport (COAWST) modeling system for inner shelf and surf zone applications. https://doi.org/10.1016/j.ocemod.2012.01.003

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

Smoothed Particle Hydrodynamics simulations of reef surf zone processes driven by plunging irregular waves

As waves interact with the slopes of coral reefs and other steep bathymetry profiles, plunging breaking usually occurs where the free surface overturns and violent water motion is triggered. Resolving these surf zone processes pose significant challenges for conventional mesh-based hydrodynamic models, due to the rapidly-deforming nature of the free surface and associated flows. Yet the accurate prediction of these surf zone hydrodynamics is critical for predicting a wide range of nearshore processes driven by wave breaking (e.g., wave dissipation and energy transfers; mean water levels and currents; and wave runup). In this study we assess the ability of the mesh-free, Lagrangian particle-based numerical modelling approach Smoothed Particle Hydrodynamics (SPH) based on DualSPHysics, to simulate the fine-scale hydrodynamic processes driven by irregular wave transformation over a fringing reef profile, by comparing results against detailed experimental observations from a physical modelling study. To greatly improve the computational efficiency, the SPH model was coupled to the mesh-based multi-layer nonhydrostatic wave-flow model SWASH. With this coupled approach, SWASH was used to efficiently simulate the evolution of non-breaking waves from the wavemaker up to the fore reef slope, with the SPH model then used to simulate the detailed hydrodynamic processes over the reef from just offshore of the breakpoint to the shoreline . The SPH model was able to accurately reproduce the complex free surface deformations during plunging breaking, the spectral evolution of waves across the reef flat (including nonlinear wave shape), the mean water levels and currents, and wave runup at the shoreline. Using the long duration simulations (>400 wave periods), the model was able to reproduce the full range of wave motions over the reef (from sea-swell to infragravity frequencies), including the increasing dominance of low frequency waves towards the shoreline and the large cross-reef standing wave motions excited by the reef geometry.

Ocean Modelling↗
USGS2021

An efficient method to calculate depth-integrated, phase-averaged momentum balances in non-hydrostatic models

Analysis of the mean (wave-averaged) momentum balance is a common approach used to explain the physical forcing driving wave set-up and mean currents in the nearshore zone. Traditionally this approach has been applied to phase-averaged models but has more recently been applied to phase-resolving models using post-processing, whereby model output is used to calculate each of the momentum terms. While phase-resolving models have the advantage of capturing the nonlinear properties of waves propagating in the nearshore (making them advantageous to enhance understanding of nearshore processes), the post-processing calculation of the momentum terms does not guarantee that the momentum balance closes. We show that this is largely due to the difficulty (or impossibility) of being consistent with the numerical approach. If the residual is of a similar magnitude as any of the relevant momentum terms (which is common with post-processing methods as we show), the analysis is largely compromised. Here we present a new method to internally calculate and extract the depth-integrated, mean momentum terms in the phase-resolving non-hydrostatic wave-flow model SWASH in a manner that is consistent with the numerical implementation. Further, we demonstrate the utility of the new method with two existing physical model studies. By being consistent with the numerical framework, the internal method calculates the momentum terms with a much lower residual at computer precision, combined with greatly reduced calculation time and output storage requirements compared to post-processing techniques. The method developed here allows the accurate evaluation of the depth-integrated, mean momentum terms of wave-driven flows while taking advantage of the more complete representation of the wave dynamics offered by phase-resolving models. Furthermore, it provides an opportunity for advances in the understanding of nearshore processes particularly at more complex sites where wave nonlinearity and energy transfers are important.

Ocean Modelling↗
USGS2015

Projected wave conditions in the Eastern North Pacific under the influence of two CMIP5 climate scenarios

Hindcast and 21st century winds, simulated by General Circulation Models (GCMs), were used to drive global- and regional-scale spectral wind-wave generation models in the Pacific Ocean Basin to assess future wave conditions along the margins of the North American west coast and Hawaiian Islands. Three-hourly winds simulated by four separate GCMs were used to generate an ensemble of wave conditions for a recent historical time-period (1976–2005) and projections for the mid and latter parts of the 21st century under two radiative forcing scenarios (RCP 4.5 and RCP 8.5), as defined by the fifth phase of the Coupled Model Inter-comparison Project (CMIP5) experiments. Comparisons of results from historical simulations with wave buoy and ERA-Interim wave reanalysis data indicate acceptable model performance of wave heights, periods, and directions, giving credence to generating projections. Mean and extreme wave heights are projected to decrease along much of the North American west coast. Extreme wave heights are projected to decrease south of ∼50°N and increase to the north, whereas extreme wave periods are projected to mostly increase. Incident wave directions associated with extreme wave heights are projected to rotate clockwise at the eastern end of the Aleutian Islands and counterclockwise offshore of Southern California. Local spatial patterns of the changing wave climate are similar under the RCP 4.5 and RCP 8.5 scenarios, but stronger magnitudes of change are projected under RCP 8.5. Findings of this study are similar to previous work using CMIP3 GCMs that indicates decreasing mean and extreme wave conditions in the Eastern North Pacific, but differ from other studies with respect to magnitude and local patterns of change. This study contributes toward a larger ensemble of global and regional climate projections needed to better assess uncertainty of potential future wave climate change, and provides model boundary conditions for assessing the impacts of climate change on coastal systems.

Ocean Modelling↗