USGS Science⌕ Search

USGS · 70035603

Sediment accumulation on the Southern California Bight continental margin during the twentieth century

Abstract

Sediment discharged into the portion of the Southern California Bight extending from Santa Barbara to Dana Point enters a complex system of semi-isolated coastal cells, narrow continental shelves, submarine canyons, and offshore basins. On both the Santa Monica and San Pedro margins, 210 Pb accumulation rates decrease in an offshore direction (from ??0.5 g cm -2 yr -1 to 0.02 g cm -2 yr -1 ), in concert with a fining in sediment grain size (from 4.5?? to 8.5??), suggesting that offshore transport of wave-resuspended material occurs as relatively dilute nepheloid layers and that hemiplegic sedimentation dominates the supply of sediment to the outer shelf, slope, and basins. Together, these areas are effectively sequestering up to 100% of the annual fluvial input. In contrast to the Santa Monica margin, which does not display evidence of mass wasting as an important process of sediment delivery and redistribution, the San Pedro margin does provide numerous examples of failures and mass wasting, suggesting that intraslope sediment redistribution may play a more important role there. Basin deposits in both areas exhibit evidence of turbidites tentatively associated with both major floods and earthquakes, sourced from either the Redondo Canyon (San Pedro Basin) or Dume Canyon (Santa Monica Basin). On the Palos Verdes shelf, sediment-accumulation rates decrease along and across the shelf away from the White's Point outfall, which has been a major source of contaminants to the shelf deposits. Accumulation rates prior to the construction of the outfall were ??0.2 g cm -2 yr -1 and increased 1.5-3.7 times during peak discharges from the outfall in 1971. The distal rate of accumulation has decreased by ??50%, from 0.63 g cm -2 yr -1 during the period 1971-1992 to 0.29 g cm -2 yr -1 during the period 1992-2003. The proximal rate of accumulation, however, has only decreased ??10%, from 0.83 g cm -2 yr -1 during the period 1971-1992 to 0.73 g cm -2 yr -1 during the period 1992-2003. Effluent-affected sediment layers on the Palos Verdes shelf can be identified in seabed profiles of naturally occurring 238 U, which is sequestered in reducing sediments. The Santa Clara River shelf, just north and west of the Santa Monica and San Pedro margins, is fine-grained and flood-dominated. Core profiles of excess 210 Pb from sites covering the extent of documented major flood deposition exhibit evidence of rapidly deposited sediment up to 25 cm thick. These beds are developing in an active depocenter in water depths of 30-50 m at an average rate of 0.72 g cm -2 yr -1 . Budget calculations for annual and 50-yr timescale sediment storage on this shelf shows that 20%-30% of the sediment discharge is retained on the shelf, leaving 70%-80% to be redistributed to the outer shelf, slope, Santa Barbara Basin, and Santa Monica Basin. ?? 2009 The Geological Society of America.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C. R. Alexander, H.J. Lee. 2009. Sediment accumulation on the Southern California Bight continental margin during the twentieth century. https://doi.org/10.1130/2009.2454(2.4)

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The Maryland Coastal Plain Aquifer Information System: A GIS-based tool for assessing groundwater resources

Groundwater is the source of drinking water for ∼1.4 million people in the Coastal Plain Province of Maryland (USA). In addition, groundwater is essential for commercial, industrial, and agricultural uses. Approximately 0.757 × 109 L d –1 (200 million gallons/d) were withdrawn in 2010. As a result of decades of withdrawals from the coastal plain confined aquifers, groundwater levels have declined by as much as 70 m (230 ft) from estimated prepumping levels. Other issues posing challenges to long-term groundwater sustainability include degraded water quality from both man-made and natural sources, reduced stream base flow, land subsidence, and changing recharge patterns (drought) caused by climate change. In Maryland, groundwater supply is managed primarily by the Maryland Department of the Environment, which seeks to balance reasonable use of the resource with long-term sustainability. The chief goal of groundwater management in Maryland is to ensure safe and adequate supplies for all current and future users through the implementation of appropriate usage, planning, and conservation policies. To assist in that effort, the geographic information system (GIS)–based Maryland Coastal Plain Aquifer Information System was developed as a tool to help water managers access and visualize groundwater data for use in the evaluation of groundwater allocation and use permits. The system, contained within an ESRI ArcMap desktop environment, includes both interpreted and basic data for 16 aquifers and 14 confining units. Data map layers include aquifer and ­confining unit layer surfaces, aquifer extents, borehole information, hydraulic properties, time-series groundwater-level data, well records, and geophysical and lithologic logs. The aquifer and confining unit layer surfaces were generated specifically for the GIS system. The system also contains select groundwater-quality data and map layers that quantify groundwater and surface-water withdrawals. The aquifer information system can serve as a pre- and postprocessing environment for groundwater-flow models for use in water-supply planning, development, and management. The system also can be expanded to include features that evaluate constraints to groundwater development, such as insufficient available drawdown, degraded groundwater quality, insufficient aquifer yields, and well-field interference. Ultimately, the aquifer information system is intended to function as an interactive Web-based utility that provides a broad array of information related to groundwater resources in Maryland’s coastal plain to a wide-ranging audience, including well drillers, consultants, academia, and the general public.

Special Paper of the Geological Society of America↗

The 2011 Mineral, Virginia, earthquake and its significance for seismic hazards in eastern North America: overview and synthesis

The 23 August 2011 M w (moment magnitude) 5.7 ± 0.1, Mineral, Virginia, earthquake was the largest and most damaging in the central and eastern United States since the 1886 M w 6.8–7.0, Charleston, South Carolina, earthquake. Seismic data indicate that the earthquake rupture occurred on a southeast-dipping reverse fault and consisted of three subevents that progressed northeastward and updip. U.S. Geological Survey (USGS) "Did You Feel It?" intensity reports from across the eastern United States and southeastern Canada, rockfalls triggered at distances to 245 km, and regional groundwater-level changes are all consistent with efficient propagation of high-frequency seismic waves (∼1 Hz and higher) in eastern North America due to low attenuation. Reported damage included cracked or shifted foundations and broken walls or chimneys, notably in unreinforced masonry, and indicated intensities up to VIII in the epicentral area based on USGS "Did You Feel It?" reports. The earthquake triggered the first automatic shutdown of a U.S. nuclear power plant, located ∼23 km northeast of the main shock epicenter. Although shaking exceeded the plant's design basis earthquake, the actual damage to safety-related structures, systems, and components was superficial. Damage to relatively tall masonry structures 130 km to the northeast in Washington, D.C., was consistent with source directivity, soft-soil ground-motion amplification, and anisotropic wave propagation with lower attenuation parallel to the northeast-trending Appalachian tectonic fabric. The earthquake and aftershocks occurred in crystalline rocks within Paleozoic thrust sheets of the Chopawamsic terrane. The main shock and majority of aftershocks delineated the newly named Quail fault zone in the subsurface, and shallow aftershocks defined outlying faults. The earthquake induced minor liquefaction sand boils, but notably there was no evidence of a surface fault rupture. Recurrence intervals, and evidence for larger earthquakes in the Quaternary in this area, remain important unknowns. This event, along with similar events during historical time, is a reminder that earthquakes of similar or larger magnitude pose a real hazard in eastern North America.

Virginia↗

Aftershocks illuminate the 2011 Mineral, Virginia, earthquake causative fault zone and nearby active faults

Deployment of temporary seismic stations after the 2011 Mineral, Virginia (USA), earthquake produced a well-recorded aftershock sequence. The majority of aftershocks are in a tabular cluster that delineates the previously unknown Quail fault zone. Quail fault zone aftershocks range from ~3 to 8 km in depth and are in a 1-km-thick zone striking ~036&deg; and dipping ~50&deg;SE, consistent with a 028&deg;, 50&deg;SE main-shock nodal plane having mostly reverse slip. This cluster extends ~10 km along strike. The Quail fault zone projects to the surface in gneiss of the Ordovician Chopawamsic Formation just southeast of the Ordovician&ndash;Silurian Ellisville Granodiorite pluton tail. The following three clusters of shallow (<3 km) aftershocks illuminate other faults. (1) An elongate cluster of early aftershocks, ~10 km east of the Quail fault zone, extends 8 km from Fredericks Hall, strikes ~035&deg;&ndash;039&deg;, and appears to be roughly vertical. The Fredericks Hall fault may be a strand or splay of the older Lakeside fault zone, which to the south spans a width of several kilometers. (2) A cluster of later aftershocks ~3 km northeast of Cuckoo delineates a fault near the eastern contact of the Ordovician Quantico Formation. (3) An elongate cluster of late aftershocks ~1 km northwest of the Quail fault zone aftershock cluster delineates the northwest fault (described herein), which is temporally distinct, dips more steeply, and has a more northeastward strike. Some aftershock-illuminated faults coincide with preexisting units or structures evident from radiometric anomalies, suggesting tectonic inheritance or reactivation.

Virginia↗