USGS Science⌕ Search

USGS · 70033420

Sulfide oxidation and distribution of metals near abandoned copper mines in coastal environments, Prince William Sound, Alaska, USA

Abstract

The oxidation of sulfide-rich rocks, mostly leftover debris from Cu mining in the early 20th century, is contributing to metal contamination of local coastal environments in Prince William Sound, Alaska. Analyses of sulfide, water, sediment, precipitate and biological samples from the Beatson, Ellamar, and Threeman mine sites show that acidic surface waters generated from sulfide weathering are pathways for redistribution of environmentally important elements into and beyond the intertidal zone at each site. Volcanogenic massive sulfide deposits composed of pyrrhotite and (or) pyrite + chalcopyrite + sphalerite with subordinate galena, arsenopyrite, and cobaltite represent potent sources of Cu, Zn, Pb, As, Co, Cd, and Hg. The resistance to oxidation among the major sulfides increases in the order pyrrhotite ??? sphalerite < chalcopyrite ??? pyrite; thus, pyrrhotite-rich rocks are typically more oxidized than those dominated by pyrite. The pervasive alteration of pyrrhotite begins with rim replacement by marcasite followed by replacement of the core by sulfur, Fe sulfate, and Fe-Al sulfate. The oxidation of chalcopyrite and pyrite involves an encroachment by colloform Fe oxyhydroxides at grain margins and along crosscutting cracks that gradually consumes the entire grain. The complete oxidation of sulfide-rich samples results in a porous aggregate of goethite, lepidocrocite and amorphous Fe-oxyhydroxide enclosing hydrothermal and sedimentary silicates. An inverse correlation between pH and metal concentrations is evident in water data from all three sites. Among all waters sampled, pore waters from Ellamar beach gravels have the lowest pH (???3) and highest concentrations of base metals (to ???25,000 ??g/L), which result from oxidation of abundant sulfide-rich debris in the sediment. High levels of dissolved Hg (to 4100 ng/L) in the pore waters probably result from oxidation of sphalerite-rich rocks. The low-pH and high concentrations of dissolved Fe, Al, and SO4 are conducive to precipitation of interstitial jarosite in the intertidal gravels. Although pore waters from the intertidal zone at the Threeman mine site have circumneutral pH values, small amounts of dissolved Fe2+ in the pore waters are oxidized during mixing with seawater, resulting in precipitation of Fe-oxyhydroxide flocs along the beach-seawater interface. At the Beatson site, surface waters funneled through the underground mine workings and discharged across the waste dumps have near-neutral pH (6.7-7.3) and a relatively small base-metal load; however, these streams probably play a role in the physical transport of metalliferous particulates into intertidal and offshore areas during storm events. Somewhat more acidic fluids, to pH 5.3, occur in stagnant seeps and small streams emerging from the Beatson waste dumps. Amorphous Fe precipitates in stagnant waters at Beatson have high Cu (5.2 wt%) and Zn (2.3 wt%) concentrations that probably reflect adsorption onto the extremely high surface area of colloidal particles. Conversely, crystalline precipitates composed of ferrihydrite and schwertmannite that formed in the active flow of small streams have lower metal contents, which are attributed to their smaller surface area and, therefore, fewer reactive sorption sites. Seeps containing precipitates with high metal contents may contribute contaminants to the marine environment during storm-induced periods of high runoff. Preliminary chemical data for mussels (Mytilus edulis) collected from Beatson, Ellamar, and Threeman indicate that bioaccumulation of base metals is occurring in the marine environment at all three sites.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R.A. Koski, L. Munk, A. L. Foster, Wayne C. Shanks, L.L. Stillings. 2008. Sulfide oxidation and distribution of metals near abandoned copper mines in coastal environments, Prince William Sound, Alaska, USA. https://doi.org/10.1016/j.apgeochem.2007.10.007

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Elemental and isotope geochemistry of Smackover Formation brines in Alabama and Arkansas: Implications for fluid mixing and water-rock interaction

This study investigates the geochemical characteristics of brines within the Upper Jurassic Smackover Formation in Alabama and Arkansas through elemental and isotopic analyses and geochemical modeling to reveal the extent and nature of fluid mixing and water-rock interactions. Smackover Formation brines exhibit Na-Cl-Ca hydrogeochemical facies and sulfate depletion relative to seawater. Lower sulfate concentrations, coupled with high H 2 S concentrations in some brines (0-364 mg/L) at temperatures >80°C, suggest that thermochemical sulfate reduction occurred. Cl/Br and Na/Br ratios indicate that salinity was controlled by the mixing of meteoric water with evaporated seawater that had reached halite saturation, rather than by halite dissolution. The δ 18 O and δ 2 H values of the brines also suggest mixing between meteoric water and evaporated seawater that had reached gypsum and halite saturation. Geochemical modeling of seawater evaporation predicts a Cl-Na or Cl-Mg facies after halite saturation, contrasting with the observed Cl-Ca dominance of the Smackover Formation brines. The Ca-enriched brines may have evolved from Cl-Mg-dominated evaporated seawater through dolomitization of limestone. The 87 Sr/ 86 Sr ratios range from 0.70740 to 0.71048, higher than the average of Jurassic seawater (0.707). The non-linear relationship between 87 Sr/ 86 Sr and 1000/Sr suggests alteration of brine geochemistry by fluid mixing or by inputs from Sr and 87 Sr-enriched rock sources. Lithium concentrations are positively correlated with 87 Sr/ 86 Sr ratios and TDS in brines enriched in these constituents. These correlations suggest deeper-seated geogenic sources and have implications for Li exploration in the northern Gulf Coast basin. Normal faults associated with the pre-Jurassic topography may have provided potential pathways for brine migration into the Smackover Formation under the influence of overpressure or thermohaline convection in the Gulf Coast.

Alabama↗

Evaluating drivers of environmental change in a lake sediment core: Insights from spectroscopic metrics of water-extractable organic matter and stable carbon isotopes

Freshwater lakes play a critical role in the global carbon cycle by storing and transforming organic matter (OM) from both terrestrial and aquatic sources. Small lakes in northern temperate regions, despite their limited surface area, disproportionately influence regional carbon budgets. Buried sediments integrate OM inputs over time and archive ecosystem responses to natural and anthropogenic disturbances. However, the direction and magnitude of recent environmental changes on sediment carbon (C) dynamics remain poorly understood. A 23-cm core was collected from a small temperate lake in northeastern USA to evaluate sediment OM content and composition over timescales relevant to historical land-use change, damming, and recovery from acid deposition. Patterns in OM burial and source contributions were revealed via elemental and isotopic analyses of bulk OM and ultraviolet-visible spectrophotometry of water-extractable organic matter (WEOM). The optical metrics expanded observations of likely OM sources beyond the information gained from bulk carbon metrics (total carbon, δ 13 C). The aromaticity of WEOM increased downcore, which is consistent with a shift from increased terrestrial inputs during early logging and damming activity (pre ∼1920) to more microbial-derived OM in recent surficial sediments. Future applications of WEOM optical properties as complements to traditional geochemical metrics can enhance interpretations of lake ecosystem responses recorded in lake sediments to environmental perturbations in temperate lakes.

New York↗

Erosion and transport of sediments in watersheds of southwest Puerto Rico determined from strontium isotopes and mixing models

Sediment outflow from streams to coastal regions can adversely affect water quality and the health of ecosystems including Puerto Rico's southwestern carbonate platform with shallow marine communities. Knowledge of sediment provenance and erosional areas would aid effective restoration to reduce excessive sedimentation. Strontium (Sr) isotopic ratios ( 87 Sr/ 86 Sr) can be used to differentiate between sediment eroded into streams from different lithologies, or rock types, and used in mixing models to estimate proportions of source materials in downstream mixtures. The goal of this study was to use Sr isotopes to differentiate between river sediments in drainages with distinct geologies and present a case study where Sr isotope mixing models are used to identify sediment sourcing to Río Loco and Bahía de Guánica, a priority watershed of the U.S. Coral Reefs Task Force. For the Río Loco watershed, model results indicate that serpentinites in the uplands contributed approximately 71 % of sediment to Bahía de Guánica. About 21 % of sediment was from trachy-andesitic basalts in the foothills, and the remaining 8 % originated from sources on the coastal plain. Neither the uppermost headwater region of Río Loco, the Canal Principal De Riego Valle De Lajas, nor the tributary Quebrada Susúa appeared to be significant sources of sediment to Río Loco's mainstem or Bahía de Guánica at the time of the study. Our results demonstrate that sediment from the serpentinite-bearing areas of Río Loco watershed was effectively transported to the lowlands, which then discharge into Guánica Bay, and highlight the potential use of Sr isotopes as tracers of sediment provenance. This will, in turn, enable better science-based restoration efforts aimed at reducing terrestrial sediment erosion and impacts to marine ecosystems.

Puerto Rico↗