USGS Science⌕ Search
Home/Archive/USGS

USGS · 70031519

An innovative carbonate coprecipitation process for the removal of zinc and manganese from mining impacted waters

P.L. Sibrell·M.A. Chambers·A.L. Deaguero·T.R. Wildeman·D.J. Reisman
View original source ↗Export metadata ↓

Abstract

Although mine drainage is usually thought of as acidic, there are many cases where the water is of neutral pH, but still contains metal species that can be harmful to human or aquatic animal health, such as manganese (Mn) and zinc (Zn). Typical treatment of mine drainage waters involves pH adjustment, but this often results in excessive sludge formation and removal of nontoxic species such as magnesium and calcium. Theoretical consideration of the stability of metal carbonate species suggests that the target metals could be removed from solution by coprecipitation with calcium carbonate. The U.S. Geological Survey has developed a limestone-based process for remediation of acid mine drainage that increases calcium carbonate saturation. This treatment could then be coupled with carbonate coprecipitation as an innovative method for removal of toxic metals from circumneutral mine drainage waters. The new process was termed the carbonate coprecipitation (CCP) process. The CCP process was tested at the laboratory scale using a synthetic mine water containing 50 mg/L each of Mn and Zn. Best results showed over 95% removal of both Mn and Zn in less than 2 h of contact in a limestone channel. The process was then tested on a sample of water from the Palmerton zinc superfund site, near Palmerton, Pennsylvania, containing over 300 mg/L Zn and 60 mg/L Mn. Treatment of this water resulted in removal of over 95% of the Zn and 40% of the Mn in the limestone channel configuration. Because of the potential economic advantages of the CCP process, further research is recommended for refinement of the process for the Palmerton water and for application to other mining impacted waters as well. ?? Mary Ann Liebert, Inc.

Explore related subjects

Environmental Engineering ScienceArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

P.L. Sibrell, M.A. Chambers, A.L. Deaguero, T.R. Wildeman, D.J. Reisman. 2007. An innovative carbonate coprecipitation process for the removal of zinc and manganese from mining impacted waters. https://doi.org/10.1089/ees.2006.0126

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2015

Concentrations and distributions of metals associated with dissolved organic matter from the Suwannee River (GA, USA)

Concentrations and distributions of metals in Suwannee River (SR) raw filtered surface water (RFSW) and dissolved organic matter (DOM) processed by reverse osmosis (RO), XAD-8 resin (for humic and fulvic acids [FA]), and XAD-4 resin (for “transphilic” acids) were analyzed by asymmetrical flow field-flow fractionation (AsFlFFF). SR samples were compared with DOM samples from Nelson's Creek (NLC), a wetland-draining stream in northern Michigan; previous International Humic Substances Society (IHSS) FA and RO samples from the SR; and an XAD-8 sample from Lake Fryxell (LF), Antarctica. Despite application of cation exchange during sample processing, all XAD and RO samples contained substantial metal concentrations. AsFlFFF fractograms allowed metal distributions to be characterized as a function of DOM component molecular weight (MW). In SR RFSW, Fe, Al, and Cu were primarily associated with intermediate to higher than average MW DOM components. SR RO, XAD-8, and XAD-4 samples from May 2012 showed similar MW trends for Fe and Al but Cu tended to associate more with lower MW DOM. LF DOM had abundant Cu and Zn, perhaps due to amine groups that should be present due to its primarily algal origins. None of the fractograms showed obvious evidence for mineral nanoparticles, although some very small mineral nanoparticles might have been present at trace concentrations. This research suggests that AsFlFFF is important for understanding how metals are distributed in different DOM samples (including IHSS samples), which may be key to metal reactivity and bioavailability.

Georgia↗
USGS2008

Using semi-permeable membrane devices and stable nitrogen isotopes to detect anthropogenic influences on the Truckee River, USA

Stable nitrogen isotopes (??15N) and semipermeable membrane devices (SPMDs) were used together to provide evidence of potential anthropogenic connections to aquatic organisms in the Truckee River, which flows through the Reno/Sparks metropolitan area in Nevada. Crayfish, snail, and periphyton ??15N values, and SPMD toxicity data collected during high and low flow periods at seven primary sites on the river were used with water quality and flow data for the assessment. All biota showed an increase of ??15N on both dates at sites downstream of inflows of a water-quality impaired tributary and urban drain relative to upstream. In addition, most of the lowest ??15N values on each date occurred at the most downstream site on the river. SPMDs sample lipophilic organic contaminants and can be used to assess organic contaminant toxicity to aquatic organisms because they use a membrane that mimics organic contaminant uptake by fish. In this study, results from a fluoroscan test [pyrene index (PI)] of SPMD extracts that responds to higher molecular weight polycyclic aromatic hydrocarbons (PAHs) showed patterns similar to stable isotope data, although observed peaks in PI values occurred in the urban area upstream of where peak ??15N values occurred. The CYP1A biomarker test, which responds to PAHs, certain polychlorinated biphenyls (PCBs), and organochlorines, showed peak toxic equivalents (TEQ) values farther downstream of the urban area. Thus, it is likely that PAHs were contributing to toxicity in the urban area, whereas other nonurban sources of organic carbon may have been present farther downstream. The combined use of stable isotope measurements and SPMDs provided a means of simultaneously examining whether aquatic biota are incorporating constituents from potential food sources (via stable isotopes) or exposure through water (via SPMDs). ?? Mary Ann Liebert, Inc. 2008.

Environmental Engineering Science↗