USGS Science⌕ Search

USGS · 70026962

Nevadaite, (Cu2+, Al, V3+)6 [Al8 (PO4)8 F8] (OH 2 (H2O)22, a new phosphate mineral species from the Gold Quarry mine, Carlin, Eureka County, Nevada: Description and crystal structure

Abstract

Nevadaite, (Cu 2+ , □, Al, V 3+ ) 6 (PO 4 ) 8 F 8 (OH) 2 (H 2 O) 22 , is a new supergene mineral species from the Gold Quarry mine, near Carlin, Eureka County, Nevada, U.S.A. Nevadaite forms radiating clusters to 1 mm of prismatic crystals, locally covering surfaces more that 2 cm across; individual crystals are elongate on [001] with a length:width ratio of > 10:1 and a maximum diameter of ~30 μm . It also occurs as spherules and druses associated with colorless to purple-black fluellite, colorless wavellite, strengitevariscite, acicular maroon-to-red hewettite, and rare anatase, kazakhstanite, tinticite, leucophosphite, torbernite and tyuyamunite. Nevadaite is pale green to turquoise blue with a pale powder-blue streak and a vitreous luster; it does not fluoresce under ultra-violet light. It has no cleavage, a Mohs hardness of ~3, is brittle with a conchoidal fracture, and has measured and calculated densities of 2.54 and 2.55 g/cm 3 , respectively. Nevadaite is biaxial negative, with 1.540, β 1.548, γ 1.553, 2 V (obs.) = 76°, 2 V (calc.) = 76° , pleochroic with X pale greenish blue, Y very pale greenish blue, Z blue, and with absorption Z ≫ X > Y and orientation X = c, Y = a, Z = b. Nevadaite is orthorhombic, space group P 2 1 mn , a 12.123(2), b 18.999(2), c 4.961(1) Å, V 1142.8(2) Å 3 , Z = 1, a:b:c = 0.6391:1:0.2611 . The strongest seven lines in the X-ray powder-diffraction pattern [ d in Å(I)( hkl )] are: 6.077(10)(200), 5.618(9)(130), 9.535(8)(020), 2.983(6)(241), 3.430(4)(041), 2.661(4)(061), and 1.844(4)(352). A chemical analysis with an electron microprobe gave P 2 O 5 32.54, Al 2 O 3 27.07, V 2 O 3 4.24, Fe 2 O 3 0.07, CuO 9.24, ZnO 0.11, F 9.22, H 2 O (calc.) 23.48, OH ≡ F–3.88, sum 102.09 wt.% ; the valence states of V and Fe, and the amount of H 2 O , were determined by crystal-structure analysis. The resulting empirical formula on the basis of 63.65 anions ( including 21.65 H 2 O pfu ) is ( (Cu 2.00 2+ Zn 0.02 V 0.98 3+ Fe 0.01 3+ Al 1.15 ) ∑ 4.16 Al 8 P 7.90 O 32 [F 8.37 (OH) 1.63 ] ∑10 (H 2 O) 21.65 . The crystal structure of nevadaite was solved by direct methods and refined to an R index of 4.0% based on 1307 observed reflections collected on a four-circle diffractometer with Mo K α X-radiation . The structure consists of ordered layers of vertex-sharing octahedra and tetrahedra alternating with layers of disordered vertex-sharing and face-sharing octahedra in the b direction. [Alϕ 5 ] chains of octahedra are decorated by (PO 4 ) tetrahedra that share vertices with octahedra adjacent in the chain . These chains link in the c direction by sharing vertices between octahedra and tetrahedra to form an ordered layer of the form [Al 8 (PO 4 ) 8 F 8 (H 2 O) 8 ] . In the disordered layer, octahedra containing positionally disordered Cu 2+ , V 3+ , Al and □ (vacancy) share trans faces to form columns that link by sharing octahedron vertices to form ribbons extending in the c direction; the resulting layer has the form {(Cu 2 2+ □ 2 V 3+ ,Al) ∑6 (H 2 O) 12 (OH) 2 (H 2 O) x }, x ≈ 2 . The layers link in the b direction by sharing vertices between octahedra and tetrahedra. Although decorated chains topologically equivalent to that in nevadaite are common in many oxysalt minerals, its chain is geometrically distinct from those topologically equivalent chains. The M – M linkage along the [ M ϕ 5 ] chains in most minerals take place through trans vertices of the octahedra, with one example of linkage through cis vertices; in nevadaite, the M – M linkage involves both trans and cis vertices, as does the chain in slavíkite . In most of these decorated chains, alternate tetrahedra along the chain occur either in a trans or a cis arrangement. In nevadaite and slavíkite, the tetrahedra are arranged in both trans and cis arrangements; the arrangements in these two minerals are geometrically distinct, however.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39.41497702499074° to 40.76806170936614° latitude; -116.21337890625° to -115.7464599609375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. A. Cooper, Frank C. Hawthorne, Andrew C. Roberts, E.E. Foord, Richard C. Erd, H. T. Evans, M.C. Jensen. 2004. Nevadaite, (Cu2+, Al, V3+)6 [Al8 (PO4)8 F8] (OH 2 (H2O)22, a new phosphate mineral species from the Gold Quarry mine, Carlin, Eureka County, Nevada: Description and crystal structure. https://doi.org/10.2113/gscanmin.42.3.741

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The global age distribution of granitic pegmatites

An updated global compilation of 377 new and previously published ages indicates that granitic pegmatites range in age from Mesoarchean to Neogene and have a semi-periodic age distribution. Undivided granitic pegmatites show twelve age maxima: 2913, 2687, 2501, 1853, 1379, 1174, 988, 525, 483, 391, 319, and 72 Ma. These peaks correspond broadly with various proxy records of supercontinent assembly, including the age distributions of granites, detrital zircon grains, and passive margins. Lithium-cesium-tantalum (LCT) pegmatites have a similar age distribution to the undivided granitic pegmatites, with maxima at 2638, 1800, 962, 529, 485, 371, 309, and 274 Ma. Lithium and Ta resources in LCT pegmatites are concentrated in the Archean and Phanerozoic. While there are some Li resources from the Proterozoic, the dominantly bimodal distribution of resources is particularly evident for Ta. This distribution is similar to that of orogenic gold deposits, and has been interpreted to reflect the preservation potential of the orogenic belts where these deposits are formed. Niobium-yttrium-fluorine (NYF) pegmatites show similar age distributions to LCT pegmatites, but with a strong maximum at ca. 1000 Ma.

Canadian Mineralogist↗

Fluid sources and metallogenesis in the Blackbird Co-Cu-Au-Bi-Y-REE district, Idaho, U.S.A.: Insights from major-element and boron isotopic compositions of tourmaline

Tourmaline is a widespread mineral in the Mesoproterozoic Blackbird Co–Cu–Au–Bi–Y–REE district, Idaho, where it occurs in both mineralized zones and wallrocks. We report here major-element and B-isotope compositions of tourmaline from stratabound sulfide deposits and their metasedimentary wallrocks, from mineralized and barren pipes of tourmaline breccia, from late barren quartz veins, and from Mesoproterozoic granite. The tourmalines are aluminous, intermediate in the schorl–dravite series, with Fe/(Fe + Mg) values of 0.30 to 0.85, and 10 to 50% X -site vacancies. Compositional zoning is prominent only in tourmaline from breccias and quartz veins; crystal rims are enriched in Mg, Ca and Ti, and depleted in Fe and Al relative to cores. The chemical composition of tourmaline does not correlate with the presence or absence of mineralization. The δ 11 B values fall into two groups. Isotopically light tourmaline (−21.7 to −7.6‰) occurs in unmineralized samples from wallrocks, late quartz veins and Mesoproterozoic granite, whereas heavy tourmaline (−6.9 to +3.2‰) is spatially associated with mineralization (stratabound and breccia-hosted), and is also found in barren breccia. At an inferred temperature of 300°C, boron in the hydrothermal fluid associated with mineralization had δ 11 B values of −3 to +7‰. The high end of this range indicates a marine source of the boron. A likely scenario involves leaching of boron principally from marine carbonate beds or B-bearing evaporites in Mesoproterozoic strata of the region. The δ 11 B values of the isotopically light tourmaline in the sulfide deposits are attributed to recrystallization during Cretaceous metamorphism, superimposed on a light boron component derived from footwall siliciclastic sediments ( e.g. , marine clays) during Mesoproterozoic mineralization, and possibly a minor component of light boron from a magmatic–hydrothermal fluid. The metal association of Bi–Be–Y–REE in the Blackbird ores suggests some magmatic input, but involvement of granite-derived fluids cannot be conclusively established from the present database.

Canadian Mineralogist↗

Characterization of flux-grown Trace-element-doped titanite using the high-mass-resolution ion microprobe (SHRIMP-RG)

Crystals of titanite can be readily grown under ambient pressure from a mixture of CaO, TiO 2 and SiO 2 in the presence of molten sodium tetraborate. The crystals produced are euhedral and prismatic, lustrous and transparent, and up to 5 mm in length. Titanite obtained by this method contains approximately 4300 ppm Na and 220 ppm B contributed from the flux. In addition to dopant-free material, titanite containing trace alkali and alkaline earth metals (K, Sr, Ba), transition metals (Sc, Cr, Ni, Y, Zr, Nb, Hf and Ta), rare-earth elements (REE), actinides (Th, U) and p-block elements (F, S, Cl, Ge, Sn and Pb) have been prepared using the same procedure. Back-scattered electron (BSE) imaging accompanied by ion-microprobe (SHRIMP-RG) analysis confirms significant incorporation of selected trace-elements at structural sites. Regardless of some zonation, the large size of the crystals and broad regions of chemical homogeneity make these crystals useful as experimental starting material, and as matrix-matched trace-element standards for a variety of microbeam analytical techniques where amorphous titanite glass, heterogeneous natural titanite or a non-titanite standard may be less than satisfactory. Trace-element-doped synthetic crystals can also provide a convenient proxy for a better understanding of trace-element incorporation in natural titanite. Comparisons with igneous, authigenic and high-temperature metasomatic titanite are examined. The use of high-mass-resolution SIMS also demonstrates the analytical challenges inherent to any in situ mass-spectrometry-based analysis of titanite, owing to the production of difficult-to-resolve molecular interferences. These interferences are dominated by Ca-Ca, Ca-Ti and Ti-Ti dimers that are significant in the mass range of 80-100, affecting all isotopes of Sr and Zr, as well as 89 Y and 93 Nb. Methods do exist for the evaluation of interferences by these dimers and of polyatomic interferences on the LREE.

Canadian Mineralogist↗