USGS ScienceSearch

USGS · 70024827

Cripple Creek and other alkaline-related gold deposits in the Southern Rocky Mountains, USA: Influence of regional tectonics

Abstract

Alkaline-related epithermal vein, breccia, disseminated, skarn, and porphyry gold deposits form a belt in the southern Rocky Mountains along the eastern edge of the North American Cordillera. Alkaline igneous rocks and associated hydrothermal deposits formed at two times. The first was during the Laramide orogeny (about 70–40 Ma), with deposits restricted spatially to the Colorado mineral belt (CMB). Other alkaline igneous rocks and associated gold deposits formed later, during the transition from a compressional to an extensional regime (about 35–27 Ma). These younger rocks and associated deposits are more widespread, following the Rocky Mountain front southward, from Cripple Creek in Colorado through New Mexico. All of these deposits are on the eastern margin of the Cordillera, with voluminous calc-alkaline rocks to the west. The largest deposits in the belt include Cripple Creek and those in the CMB. The most important factor in the formation of all of the gold deposits was the near-surface emplacement of relatively oxidized volatile-rich alkaline magmas. Strontium and lead isotope compositions suggest that the source of the magmas was subduction-modified subcontinental lithosphere. However, Cripple Creek alkaline rocks and older Laramide alkaline rocks in the CMB that were emplaced through hydrously altered LREE-enriched rocks of the Colorado (Yavapai) province have 208 Pb/ 204 Pb ratios that suggest these magmas assimilated and mixed with significant amounts of lower crust. The anomalously hot, thick, and light crust beneath Colorado may have been a catalyst for large-scale transfer of volatiles and crustal melting. Increased dissolved H 2 O (and CO 2 , F, Cl) of these magmas may have resulted in more productive gold deposits due to more efficient magmatic-hydrothermal systems. High volatile contents may also have promoted Te and V enrichment, explaining the presence of fluorite, roscoelite (vanadium-rich mica) and tellurides in the CMB deposits and Cripple Creek as opposed to deposits to the south. Deep-seated structures of regional extent that formed during the Proterozoic allowed the magmas to rise to shallow crustal levels. Proterozoic sites of intrusions at 1.65, 1.4, and 1.1 Ga were also important precursors to alkaline-related gold deposits. Many of the larger gold deposits are located at sites of Proterozoic intrusions, and are localized at the intersection of northeast-trending ductile shear zones formed during Mesoproterozoic deformation, and an important north-trending fault formed during 1.1 Ga rifting.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 31° to 42° latitude; -110° to -102° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Karen D. Kelley, Steve Ludington. 2002. Cripple Creek and other alkaline-related gold deposits in the Southern Rocky Mountains, USA: Influence of regional tectonics. https://doi.org/10.1007/s00126-001-0229-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The use of fluorite geochemistry and machine learning to identify critical mineral systems

Fluorite (CaF 2 ) is a potential pathfinder to critical mineral and rare earth element (REE) deposits but its application has been limited to a narrow range of mineralization types. I show that fluorite is a robust recorder of mineralization fertility by applying statistical and machine-learning methods to a new global fluorite geochemical database. Distinct median rare earth and trace element patterns are observed among deposit types and genetic environments. Fluorite associated with carbonatites and REE deposits are relatively enriched in Sr and have minimal Eu anomalies. These characteristics define new bivariate discrimination diagrams that correctly identify 78% of carbonatite-related fluorite and 88% of fluorite from REE deposits. Random forest classifiers were developed for a wide range of mineralization types and genetic settings. Trained solely on rare earth element patterns, these models achieve accuracies of 77–79%. Higher classification accuracies (up to 88–96%) are obtained when including elements such as Sr, highlighting the significance of trace elements for optimal fluorite classification. The recognition of diagnostic fluorite compositional fingerprints, particularly in REE-fertile systems, underscores its potential as a pathfinder and indicator for critical mineral exploration in F-bearing environments.

Mineralium Deposita

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada

Microtextural characteristics of adularia in banded quartz veins from the Midas low-sulfidation epithermal deposit, Nevada

High-grade ores at the Miocene Midas low-sulfidation epithermal deposit in northern Nevada are confined to crustiform quartz veins containing abundant adularia. Micro-X-ray fluorescence elemental mapping reveals that adularia is a common gangue mineral occurring in colloform bands, bands showing bladed textures, and bands with dendritic terminations. The adularia aggregates have delicate shapes and are comprised of stacked, submillimeter crystals hosted by fine-grained quartz. The textural evidence suggests that the adularia aggregates originally formed within a gel-like, noncrystalline silica matrix, which subsequently transformed into quartz. This indicates that the adularia did not precipitate in open space along the vein walls. Correlative microscopy, involving scanning electron microscopy-based automated mineralogy and optical petrography, demonstrates that bands containing abundant adularia are not the primary host to ore minerals. The ore minerals occur in different bands within the crustiform veins, implying that adularia and ore mineral precipitation did not always occur simultaneously. It is hypothesized here that fluid flow at Midas involved intermittent short-lived events of fluid flashing, causing rapid solute supersaturation in the liquid. During each flashing event, different amounts of vapor were produced along a given vein. Compositional differences between adjacent bands in the crustiform quartz veins may, therefore, be linked to variations in the amount of vapor formed during each flash event.

Nevada