USGS Science⌕ Search

USGS · 70022354

Bedrock knobs, San Francisco Bay: Do navigation hazards outweigh other environment problems?

Abstract

Three bedrock knobs (Arch, Harding, and Shag rocks) rise above the unconsolidated sediment of central San Francisco Bay to a water depth of less than -12 m (<-39.4 ft MLLW). These rocks are within the westbound vessel traffic area, and the northernmost, Harding Rock, is approximately 300 m (984 ft) from the two-way deep water traffic lane. The rocks pose a hazard to deep-draft vessels. Large ships with drafts deeper than -17 m (-55.8 ft) cross central San Francisco Bay bound for and returning from major port cities of the Bay estuary. Acoustic profiling data show that bedrock extends at a gentle to moderate slope away from the knobs. These data also show that two of the knobs, Harding and Shag, may be part of a bedrock ridge that extends to Alcatraz Island and perhaps southeast to Blossom Rock. The tops of these rocks should be lowered to a depth of -17 m (-55.8 ft), with a total volume of as much as 245,000 m 3 (320,460 yd 3 ), at an estimated cost of nearly 27 million dollars, to eliminate the possibility that a tanker would strike one and rupture. A resulting large oil spill would likely cost many times more than the 10 million dollars needed to clean up a small 1996 spill. If the rocks were removed, local habitat for striped bass and other game fish would be altered, with potential negative impact on sport fishing. Currently, public officials are studying the benefits to the Bay environment of lowering the rock knobs.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37.7745140408613° to 37.95231948449752° latitude; -122.53875732421875° to -122.28813171386719° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Paul R. Carlson, John L. Chin, Florence L. Wong. 2000-02-01. Bedrock knobs, San Francisco Bay: Do navigation hazards outweigh other environment problems?. https://doi.org/10.2113/gseegeosci.6.1.41

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Developing a probabilistic tsunami hazard assessment framework for Pacific sources: USGS Powell Center meeting summary

Multi-organizational principal investigators formed a U.S. Geological Survey (USGS) Powell Center Working Group (WG), Tsunami Source Standardization for Hazards Mitigation in the United States, to develop a comprehensive series of sources capable of generating tsunamis that could impact U.S. state and territory coastal areas using probabilistic tsunami hazard analysis (PTHA). PTHA results are commonly used to provide consistent tsunami hazard information for use in engineering and risk assessment and, to a lesser extent, hazard response planning. Following an initial weeklong planning meeting in April 2018, designed to establish the WG’s scope, a series of weeklong meetings devoted to aspects of tsunami hazards placed emphasis on assessment of various tsunami sources, including subduction zones in Alaska, the Atlantic and Caribbean, Cascadia, and the Pacific Basin, as well as landslides in Alaska, the Atlantic, and the Caribbean. The final meeting in the series discussed tsunami sources from crustal faults. These meetings, each with a regional geographic focus, were designed to incorporate reviews and feedback from subject matter experts (SMEs) in academia, private industry, and federal, state, and local governmental organizations. Incorporating consensus from SMEs is important because the results derived from the tsunami source models will be used to inform the public about potential hazards from tsunamis related to safety concerns. This paper describes the USGS Powell Center meeting in March 2023, devoted specifically to developing a PTHA for tsunami sources in the Pacific Ocean Basin other than the Alaska–Aleutian and Cascadia subduction zones that were addressed during previous WG meetings.

Environmental & Engineering Geoscience↗

Hydrological and geophysical investigation of streamflow losses and restoration strategies in an abandoned mine lands setting

Longitudinal discharge and water-quality campaigns (seepage runs) were combined with surface-geophysical surveys, hyporheic-temperature profiling, and watershed-scale hydrological monitoring to evaluate the locations, magnitude, and impact of streamwater losses from the West Creek subbasin of the West West Branch Schuylkill River into the underground Oak Hill Mine complex that extends beneath the watershed divide. Abandoned mine drainage (AMD), containing iron and other contaminants, from the Oak Hill Boreholes to the West Branch Schuylkill River was sustained during low-flow conditions and correlated to streamflow lost through the West Creek streambed. During high-flow conditions, streamflow was transmitted throughout West Creek; however, during low-flow conditions, all streamflow from the perennial headwaters was lost within the 300-to-600-m "upper reach" where an 1889 mine map indicated steeply dipping coalbeds underlie the channel. During low-flow conditions, the channel within the "intermediate reach" 700-to-1650-m downstream gained groundwater seepage with higher pH and specific conductance than upstream; however, all streamflow 1650-to-2050-m downstream was lost to underlying mines. Electrical resistivity and electromagnetic conductivity surveys indicated conductive zones beneath the upper reach, where flow loss occurred, and through the intermediate reach, where gains and losses occurred. Temperature probes at 0.06-to-0.10-m depth within the hyporheic zone of the intermediate reach indicated potential downward fluxes as high as 2.1x10-5 m/s. Cumulative streamflow lost from West Creek during seepage runs averaged 53.4 L/s, which equates to 19.3 percent of the daily average discharge of AMD from the Oak Hill Boreholes and a downward flux of 1.70x10-5 m/s across the 2.1-km-by-1.5-m West Creek stream-channel area.

Pennsylvania↗

The road to Yucca Mountain—Evolution of nuclear waste disposal in the United States

The generation of electricity by nuclear power and the manufacturing of atomic weapons have created a large amount of spent nuclear fuel and high-level radioactive waste. There is a world-wide consensus that the best way to protect mankind and the environment is to dispose of this waste in a deep geologic repository. Initial efforts focused on salt as the best medium for disposal, but the heat generated by the radioactive waste led many earth scientists to examine other rock types. In 1976, the director of the U.S. Geological Survey (USGS) wrote to the U.S. Energy Research and Development Administration (ERDA), predecessor agency of the U.S. Department of Energy (DOE), suggesting that there were several favorable environments at the Nevada Test Site (NTS), and that the USGS already had extensive background information on the NTS. Later, in a series of communications and one publication, the USGS espoused the favorability of the thick unsaturated zone. After the passage of the Nuclear Waste Policy Act (1982), the DOE compiled a list of nine favorable sites and settled on three to be characterized. In 1987, as the costs of characterizing three sites ballooned, Congress amended the Nuclear Waste Policy Act directing the DOE to focus only on Yucca Mountain in Nevada, with the proviso that if anything unfavorable was discovered, work would stop immediately. The U.S. DOE, the U.S. DOE national laboratories, and the USGS developed more than 100 detailed plans to study various earth-science aspects of Yucca Mountain and the surrounding area, as well as materials studies and engineering projects needed for a mined geologic repository. The work, which cost more than 10 billion dollars and required hundreds of man-years of work, culminated in a license application submitted to the U.S. Nuclear Regulatory Commission (NRC) in 2008.

Environmental & Engineering Geoscience↗