USGS Science⌕ Search
Home/Archive/USGS

USGS · 70022202

Differences in topographic characteristics computed from 100- and 1000-m resolution digital elevation model data

D.M. Wolock·G.J. McCabe
View original source ↗Export metadata ↓

Abstract

Topographic characteristics computed from 100- and 1000-m resolution digital elevation model (DEM) data are compared for 50 locations representing varied terrain in the conterminous USA. The topographic characteristics are three parameters used extensively in hydrological research and modelling - slope (S), specific catchment area (A(s)) and a wetness index computed as the logarithm of the specific catchment area divided by slope [ln(A(s)/S)]. Slope values computed from 1000-m DEMs are smaller than those computed from 100-m DEMs; specific catchment area and the wetness index are larger for the 1000-m DEMs compared with the 100-m DEMs. Most of the differences between the 100- and 1000-m resolution DEMs can be attributed to terrain-discretization effects in the computation of the topographic characteristics and are not the result of smoothing or loss of terrain detail in the coarse data. In general, the terrain-discretization effects are greatest on flat terrain with long length-scale features, and the smoothing effects are greatest on steep terrain with short length-scale features. For the most part, the differences in the average values of the topographic characteristics computed from 100- and 1000-m resolution DEMs are predictable; that is, biases in the mean values for the characteristics computed from a 1000-m DEM can be corrected with simple linear equations. Copyright (C) 2000 John Wiley and Sons, Ltd.Topographic characteristics computed from 100- and 1000-m resolution digital elevation model (DEM) data are compared for 50 locations representing varied terrain in the conterminous USA. The topographic characteristics are three parameters used extensively in hydrological research and modelling - slope (S), specific catchment area (As) and a wetness index computed as the logarithm of the specific catchment area divided by slope [In(As/S)]. Slope values computed from 1000-m DEMs are smaller than those computed from 100-m DEMs; specific catchment area and the wetness index are larger for the 1000-m DEMs compared with the 100-m DEMs. Most of the differences between the 100- and 1000-m resolution DEMs can be attributed to terrain-discretization effects in the computation of the topographic characteristics and are not the result of smoothing or loss of terrain detail in the coarse data. In general, the terrain-discretization effects are greatest on flat terrain with long length-scale features, and the smoothing effects are greatest on steep terrain with short length-scale features. For the most part, the differences in the average values of the topographic characteristics computed from 100- and 1000-m resolution DEMs are predictable; that is, biases in the mean values for the characteristics computed from a 1000-m DEM can be corrected with simple linear equations.

Explore related subjects

Hydrological ProcessesArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

D.M. Wolock, G.J. McCabe. 2000. Differences in topographic characteristics computed from 100- and 1000-m resolution digital elevation model data. https://doi.org/10.1002/(sici)1099-1085(20000430)14%3A6%3C987%3A%3Aaid-hyp980%3E3.0.co%3B2-a

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Potential warming-induced changes in stream water sources between proglacial and non-glacial streams, south-central Alaska

Snow and ice-melt are essential for global water resources. Rising air temperatures are causing vegetation encroachment and shrubification of previously snow- and ice-covered landscapes, and precipitation regimes are changing. Collectively, these changes will likely affect the hydrology of mountain environments, although the exact ways in which the hydrology will change are poorly understood. Changing source waters (i.e., the proportion of ice-melt, snowmelt, rain and groundwater) affect the timing and magnitude of streamflow and affect stream temperature, sediment, solute and nutrient fluxes. We investigate spatial and seasonal source water contributions across sub-watersheds of the Nellie Juan River watershed on Alaska's Kenai Peninsula, which differ in glacier cover, elevation and land cover, using a space-for-time approach. To do so, we use a three-endmember mixing model to quantify the contribution of rain, snow/ice-melt and deep groundwater. We show that snow/ice-melt peak later in proglacial streams compared to non-glacial streams. Endmember contributions in non-glacial streams generally vary with elevation and season. We also found that groundwater is a major contributor to streamflow across the study area, contributing between 12% and 47% seasonally, and may become increasingly important as snowpack and ice-melt decrease. This research characterises the shift from a glacierised to a deglaciating landscape through the lens of source water contribution. Broadly, these findings could help improve understanding of how water resources in glacierised watersheds are affected by warming air temperatures.

Alaska↗
USGS2026

Streamflow and surface-water presence data availability across the conterminous United States: A review for headwater systems

Water is essential for life on Earth, supporting ecosystems, human health, and economic activities. Hydrology relies on observational data, and this paper discusses regional and national datasets for the conterminous United States (CONUS) publicly available as of 2023, focusing on headwaters, defined as first- and second-order streams at 1:24000 scale. It identifies 72 primary and secondary datasets and 11 repositories and argues how better integration and accessibility of hydrological data can improve research. The paper distinguishes between datasets where streamflow was the primary data collection objective and those where it was secondary. This distinction highlights opportunities to consider data from efforts peripheral to hydrology but is still useful for understanding hydrologic conditions. The analysis reveals that out of about 118 000 active and inactive stream observation sites, about 6.6% and 25% are located on first- and second-order streams, respectively. This indicates a substantial data gap for headwater systems, which account for over 77% of stream length in CONUS. Federal agencies manage 72% of hydrologic monitoring sites across all stream orders, but only 34% of these are in headwater systems. Academic institutions operate about 2% of sites, with almost half (48%) in headwater systems, focusing on ecosystem research. State agencies also operate about 2% of sites, primarily on larger systems, with 19% on headwaters. Additionally, 23% of sites are managed by multiple agencies. Spatial patterns further reveal pronounced disparities among physiographic regions. Eastern and coastal provinces show relatively dense monitoring, while central and western regions show sparse coverage. These gaps reflect historical priorities, logistical constraints, funding limitations, and the high cost of continuous instrumentation. To address biases in monitoring networks, data collection could be enhanced with low-cost monitoring, community science, and remote sensing technologies. This study also notes the benefits of long-term monitoring and prioritizing retention of streamgages with longer records.

conterminous United States↗
USGS2026

A novel drive-point multilevel system to investigate PFAS and other contaminants of global concern in the hyporheic zone of a wastewater effluent dominated stream

Contaminants found in treated wastewater discharged to streams, including pharmaceuticals and per- and polyfluoroalkyl substances (PFAS), are of global concern due to their deleterious effects on aquatic ecosystems and potential impacts to human health. Hyporheic zones have strong potential for contaminant attenuation. Assessing this potential requires collection of physical and biogeochemical data within the hyporheic zone. This study tested the applicability of a novel drive-point multilevel system (DP-MLS) for quantifying head profiles and characterizing contaminant concentrations in the hyporheic zone of a temperate region effluent dominated stream (EDS). DP-MLS, each with 4 ports, were installed in the stream bed at two sites, DS-1 and DS-2, 0.2 and 4.7 km downstream of the effluent outfall, respectively. Head profiles were measured and groundwater collected for analysis of pharmaceuticals and PFAS temporally over two years. The DP-MLS withstood rapid changes in stage, ice formation, and floating debris. Vertical hydraulic gradients (VHG) were generally upward but varied in magnitude indicating heterogeneity in hydraulic conductivity and variability in flow conditions. Upward VHG were also about 2X larger at DS-1 than at DS-2. Contaminant concentration profiles consistently showed penetration of pharmaceuticals and PFAS to 1 m below the bed at DS-2 while there was less penetration, lower groundwater concentrations, and more temporal variability in concentrations at DS-1. Integration of the physical and chemical data suggests weaker upwelling conditions at DS-2 are more easily reversed during periods of high stream stage, which could facilitate migration of wastewater contaminants into the bed. However, further studies incorporating other transport processes and reach scale dynamics are required to fully characterize these exchanges. Overall, this study demonstrates the efficacy of these novel DP-MLSs for characterization of the hyporheic zone and provides new insights into the occurrence, composition, and persistence of wastewater derived contaminants in the hyporheic zone of a well-studied EDS.

Iowa↗