USGS ScienceSearch

USGS · 70022054

Seismic subduction of the Nazca Ridge as shown by the 1996-97 Peru earthquakes

Abstract

By rupturing more than half of the shallow subduction interface of the Nazca Ridge, the great November 12, 1996 Peruvian earthquake contradicts the hypothesis that oceanic ridges subduct aseismically. The mainshock's rupture has a length of about 200 km and has an average slip of about 1.4 m. Its moment is 1.5 x 1028 dyne-cm and the corresponding M(w) is 8.0. The mainshock registered three major episodes of moment release as shown by a finite fault inversion of teleseismically recorded broadband body waves. About 55% of the mainshock's total moment release occurred south of the Nazca Ridge, and the remaining moment release occurred at the southern half of the subduction interface of the Nazca Ridge. The rupture south of the Nazca Ridge was elongated parallel to the ridge axis and extended from a shallow depth to about 65 km depth. Because the axis of the Nazca Ridge is at a high angle to the plate convergence direction, the subducting Nazca Ridge has a large southwards component of motion, 5 cm/yr parallel to the coast. The 900-1200 m relief of the southwards sweeping Nazca Ridge is interpreted to act as a 'rigid indenter,' causing the greatest coupling south of the ridge's leading edge and leading to the large observed slip. The mainshock and aftershock hypocenters were relocated using a new procedure that simultaneously inverts local and teleseismic data. Most aftershocks were within the outline of the Nazca Ridge. A three-month delayed aftershock cluster' occurred at the northern part of the subducting Nazca Ridge. Aftershocks were notably lacking at the zone of greatest moment release, to the south of the Nazca Ridge. However, a lone foreshock at the southern end of this zone, some 140 km downstrike of the mainshock's epicenter, implies that conditions existed for rupture into that zone. The 1996 earthquake ruptured much of the inferred source zone of the M(w) 7.9-8.2 earthquake of 1942, although the latter was a slightly larger earthquake. The rupture zone of the 1996 earthquake is immediately north of the seismic gap left by the great earthquakes (M(w) ~8.8-9.1) of 1868 and 1877. The M(w) 8.0 Antofagasta earthquake of 1995 occurred at the southern end of this great seismic gap. The M(w) 8.2 deep-focus Bolivian earthquake of 1994 occurred directly downdip of the 1868 portion of that gap. The recent occurrence of three significant earthquakes on the periphery of the great seismic gap of the 1868 and 1877 events, among other factors, may signal an increased seismic potential for that zone.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W. Spence, C. Mendoza, E.R. Engdahl, G. L. Choy, E. Norabuena. 1999. Seismic subduction of the Nazca Ridge as shown by the 1996-97 Peru earthquakes. https://pubs.usgs.gov/publication/70022054

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Local variations in broadband sensor installations: Orientations, sensitivities, and noise levels

As seismologists continue to place more stringent demands on data quality, accurately described metadata are becoming increasingly important. In order to better constrain the orientation and sensitivities of seismometers deployed in U.S. Geological Survey networks, the Albuquerque Seismological Laboratory (ASL) has recently begun identifying true north with a fiber optic gyroscope (FOG) and has developed methodologies to constrain mid-band, vertical component sensitivity levels to less than 1% in a controlled environment. However, questions remain regarding the accuracy of this new alignment technique as well as if instrument sensitivities and background noise levels are stable when the seismometers are installed in different environmental settings. In this study, we examine the stability and repeatability of these parameters by reinstalling two high-quality broadband seismometers (Streckeisen STS-2.5 and Nanometrics T-360 Global Seismographic Network (GSN) version) at different locations around the ASL and comparing them to each other and a reference STS-6 seismometer that stayed stationary for the duration of the experiment. We find that even in different environmental conditions, the sensitivities of the two broadband seismometers stayed stable to within 0.1% and that orientations attained using the FOG are generally accurate to within a degree. However, one install was off by 5° due to a mistake made by the installation team. These results indicate that while technology and methodologies are now in place to calibrate and orient a seismometer to within 1°, human error both during the installation and while producing the metadata is often a limiting factor. Finally, we find that background noise levels at short periods (0.1–1 s) become noisier when the sensors are emplaced in unconsolidated materials, whereas the noise levels at long periods (30–100 s) are not sensitive to local geological structure on the vertical components.

Pure and Applied Geophysics

Inter-source interferometry of seismic body waves: Required conditions and examples

Seismic interferometry is widely applied to retrieve wavefields propagating between receivers. Another version of seismic interferometry, called inter-source interferometry, uses the principles of seismic reciprocity and expands interferometric applications to retrieve waves that propagate between two seismic sources. Previous studies of inter-source interferometry usually involve surface-wave and coda-wave estimations. We use inter-source interferometry to estimate the P-waves propagating between two sources rather than the estimation of surface waves and coda waves. We show that the recovered arrival times are dependent on the accuracy of the earthquake catalog of the two sources. Using inter-source interferometry, one can recover the waveform of the direct body waves and potentially reconstruct the waveform of coda waves, depending on the source-receiver geometry. The retrieval of these waveforms is accurate only when the wavefield is sampled with approximately 4 receivers per wavelength in the stationary phase zone. We show that using only receivers inside the stationary phase region for inter-source interferometry introduces the phase error of approximately 0.3 radians. In our study, we show an example of the P-wavefield reconstruction between two earthquakes using the seismic records from an array along San Andreas Fault. The retrieved P waves give a qualitative estimation of the thickness of the low-velocity zone of San Andreas Fault of approximately 4 km.

Pure and Applied Geophysics