USGS Science⌕ Search
Home/Archive/USGS

USGS · 70020911

Seismic- and well-log-inferred gas hydrate accumulations on Richards Island

T. S. Collett
View original source ↗Export metadata ↓

Abstract

The gas hydrate stability zone is areally extensive beneath most of the Mackenzie Delta-Beaufort Sea region, with the base of the gas hydrate stability zone more than 1000 m deep on Richards Island. In this study, gas hydrate has been inferred to occur in nine Richards Island exploratory wells on the basis of well-log responses calibrated to the response of the logs within the cored gas-hydrate-bearing intervals of the JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well. The integration of the available well-log data with more than 240 km of industry-acquired reflection seismic data have allowed us to map the occurrence of four significant gas hydrate and associated free-gas accumulations in the Ivik-Mallik-Taglu area on Richards Island. The occurrence of gas hydrate on Richards Island is mostly restricted to the crest of large anticlinal features that cut across the base of the gas hydrate stability zone. Combined seismic and well-log data analysis indicate that the known and inferred gas hydrate accumulations on Richards Island may contain as much as 187 178106 m3 of gas.

Explore related subjects

Bulletin of the Geological Survey of CanadaArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

T. S. Collett. 1999. Seismic- and well-log-inferred gas hydrate accumulations on Richards Island. https://pubs.usgs.gov/publication/70020911

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2008

Canadian groundwater inventory: Regional hydrogeological characterization of the south-central part of the maritimes basin

The Maritimes Groundwater Initiative (MGWI) is a large, integrated, regional hydrogeological study focusing on a representative area of the Maritimes Basin in eastern Canada. The study area covers a land surface of 10 500 km 2 , of which 9 400 km 2 are underlain by sedimentary rocks. This sedimentary bedrock is composed of a sequence of discontinuous strata of highly variable hydraulic properties, and is generally overlain by a thin layer of glacial till(mostly 4-8 m thick, but can reach 20 m). Depending on the area, 46 to 100% of the population relieson groundwater for water supply, either from municipal wells or from private residential wells. The main objectives of this project were to improve the general understanding of groundwater-flow dynamics and to provide baseline information and tools for a regional groundwater-resource assessment. This bulletin presents the current state of understanding of this hydrogeological system, along with the methodology used to characterize and analyze its distinct behaviour at three different scales. This regional bedrock aquifer system contains confined and unconfined zones, and each of its lenticular permeable strata extends only a few kilometres. Preferential groundwater recharge occurs where sandy till is present. The mean annual recharge rate to the bedrock is estimated to range between 130 and 165 mm/a. Several geological formations of this basin provide good aquifers, with hydraulic conductivity in the range 5x10 -6 to 10 -4 m/s. Based on results of numerical flow modelling, faults were interpreted to have a key role in the regional flow. Pumping-test results revealed that the fractured aquifers can locally be very heterogeneous and anisotropic, but behave similarly to porous media. Work performed at the local scale indicated that most water-producing fractures seem to be subhorizontal and generally oriented in a northeasterly direction, in agreement with regional structures and pumping-test results. Almost all residential wells are shallow (about 20 m) open holes that are cased only through the surficial sediments.

Bulletin of the Geological Survey of Canada↗
USGS2006

Unravelling the structural control of mississippi valley-type deposits and prospects in carbonate sequences of the Western Canada Sedimentary Basin

Re-examination of selected MVT outcrops and cores in the Interior Plains and Rocky Moun-tains of Alberta, corroborated with previous paragenetic, isotopic and structural data, suggests Laramide structural channelling of dolomitizing and mineralizing fluids into strained carbonate rocks. At Pine Point, extensional faults underlying the trends of MVT ore bodies and brittle faults overprinting the Great Slave Lake Shear Zone define apinnate fault geometry and appear to be kinematically linked. Chemical and isotopic characteristics of MVT parental fluids are consistent with seawater and brine convection within fault-confined verticalaquifers, strong water-basement rock interaction, metalleaching from the basement, and focused release of hydrothermal fluids within linear zones of strained carbonate caprocks. Zones of recurrent strain in the basement and a cap of carbonate strata constitute the critical criteria for MVTexploration target selection in the WCSB.

Bulletin of the Geological Survey of Canada↗