USGS Science⌕ Search

USGS · 70018980

Sewage contamination in the upper Mississippi River as measured by the fecal sterol, coprostanol

Abstract

The molecular sewage indicator, coprostanol, was measured in bed sediments of the Mississippi River for the purpose of determining sewage contamination. Coprostanol is a non-ionic, non-polar, organic molecule that associates with sediments in surface waters, and concentrations of coprostanol in bed sediments provide an indication of long-term sewage loads. Because coprostanol concentrations are dependent on particle size and percent organic carbon, a ratio between coprostanol (sewage sources) and cholestanol + cholesterol (sewage and non-sewage sources) was used to remove the biases related to particle size and percent organic carbon. The dynamics of contaminant transport in the Upper Mississippi River are influenced by both hydrologic and geochemical parameters. A mass balance model incorporating environmental parameters such as river and tributary discharge, suspended sediment concentration, fraction of organic carbon, sedimentation rates, municipal discharges and coprostanol decay rates was developed that describes coprostanol concentrations and therefore, expected patterns of municipal sewage effects on the Upper Mississippi River. Comparison of the computed and the measured coprostanol concentrations provides insight into the complex hydrologic and geochemical processes of contaminant transport and the ability to link measured chemical concentrations with hydrologic characteristics of the Mississippi River.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J.H. Writer, J.A. Leenheer, L. B. Barber, G.L. Amy, S.C. Chapra. 1995. Sewage contamination in the upper Mississippi River as measured by the fecal sterol, coprostanol. https://doi.org/10.1016/0043-1354(94)00304-p

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Aging of biosolids in fields prolongs the release of biosolid-borne PFAS and promotes the release of select PFCA in water

Land application of biosolids can introduce PFAS into croplands. Biosolids transported to surface waters through runoff may subsequently release PFAS into aquatic environments. The objective was to evaluate the effects of the aging of biosolids and the presence of sediment on the release of biosolid-borne PFAS to water at the water-sediment interface under anaerobic conditions. Through two independent rounds of microcosm experiments, we demonstrate that by day 136, most of the PFAS compounds (e.g., perfluorocarboxylic acids, or PFCAs) released <10 ng per g biosolids dry weight, except for 5:3 FTCA. Kinetically, the aging process substantially delayed the release of some long-chain PFAS (i.e., PFNA, PFDA, and PFOS) to water, due to the collapse of the porous structure of biosolids during aging. After day 136, the amount of long-chain PFAS released from aged biosolids reached levels similar to those released from the fresh biosolids due to the recovery of the pore structure during the release experiment. Mass balance analysis showed considerably higher, final masses of PFPeA, PFHxA, and PFOA than their initial masses, suggesting that precursors were biotransformed into these compounds during the release experiment, and biosolid aging led to elevated biotransformation and release of these three PFCAs. Sediment had little effect on the kinetics or extent of PFAS release from biosolids, except that the extent of FTCA release was reduced in the presence of sediment potentially due to adsorption. Overall, biosolid aging can delay the release of long-chain PFAS and promote the biotransformation to and release of PFCAs.

Water Research↗

Decoding the oxidative digestion mechanism for polystyrene nanoplastic detection in the Great Lakes using a customizable Raman spectral processing algorithm

Despite the concerns surging around nanoplastics (NPs) regarding their prevalence and bioavailability in freshwater systems, robust detection of NPs in complex environmental matrices is hindered by the lack of standardized sample pretreatment and a mechanistic understanding of oxidative digestion. Here, we systematically investigate the interaction between hydrogen peroxide (H 2 O 2 ) and polystyrene (PS) NPs during digestion in deionized (DI) water and four environmental matrices from in and around the Great Lakes Basin. To facilitate high-throughput analysis, we develop Pre_peak, a customizable Raman spectral processing algorithm that achieves >99% accuracy for both NP identification and interference rejection, allowing reliable NP quantification via pixel counting and systematic decoding of the oxidative digestion mechanisms. In DI water, varying H 2 O 2 doses from 0 to 30% has negligible effects on the recovery and Raman signal intensity of PS NPs over 24 hours of digestion. However, morphological changes and aggregation of PS NPs are observed when the H 2 O 2 dose exceeds 20%. Prolonged digestion further leads to progressive NP loss. In natural waters, the optimal dosage and digestion duration depend on matrix characteristics, including dissolved organic matter (DOM) and ion composition. This study provides mechanistic insights into NP–oxidant interactions and underscores the need for matrix-tailored digestion protocols to advance standardized NP detection in freshwater environments.

Great Lakes↗

Transit time modeling framework for predicting freshwater salinization in urban catchments

The salinity of inland freshwaters is rising globally, particularly in urban watersheds where winter road deicers are widely applied. Attributing stream salinity dynamics to specific sources and transport pathways remains challenging due to episodic salt inputs, engineered drainage, and strong coupling between hydrology and subsurface storage. We present a modeling framework that couples climate-driven deicer build-up and wash-off with transient transit time distribution theory to simulate salt transport through drainage, interflow, and groundwater pathways. Applied to an urban watershed in Northern Virginia (USA), the model reproduces ten years of high-frequency stream salinity measurements across daily-to-decadal timescales. The calibrated model implies an average deicer application of 206 tonnes Cl −1 yr −1 , or roughly one 20 kg bag of rock salt person −1 yr −1 when normalized by the 20,000 people living in the watershed. In winter months, higher infiltration routes a large fraction of snowmelt and deicers into shallow subsurface pathways, enhancing vadose-zone and interflow contributions to stream salinity. Limited subsurface storage capacity and seasonal hydrologic turnover flush excess chloride from the vadose zone and groundwater during subsequent summer storms. By linking climate-driven deicer inputs, hydrologic connectivity, and stream water age, the framework provides a transferable basis for diagnosing and managing freshwater salinization in urban watersheds.

Virginia↗