USGS Science⌕ Search
Home/Archive/USGS

USGS · 70018811

Improved method for measuring water imbibition rates on low-permeability porous media

M.D. Humphrey·J.D. Istok·L. E. Flint·A. L. Flint
View original source ↗Export metadata ↓

Abstract

Existing methods for measuring water imbibition rates are inadequate when imbibition rates are small (e.g., clay soils and many igneous rocks). We developed an improved laboratory method for performing imbibition measurements on soil or rock cores with a wide range of hydraulic properties. Core specimens are suspended from an electronic strain gauge (load cell) in a closed chamber while maintaining the lower end of the core in contact with a free water surface in a constant water level reservoir. The upper end of the core is open to the atmosphere. During imbibition, mass increase of the core is recorded continuously by a datalogger that converts the load cell voltage signal into mass units using a calibration curve. Computer automation allows imbibition rate measurement on as many as eight cores simultaneously and independently. Performance of each component of the imbibition apparatus was evaluated using a set of rock cores (2.5 cm in diameter and 2–5 cm in length) from a signle lithostratigraphic unit composed of non-to-moderately welded ash-flow tuff (a glass-rich pyroclastic rock partially fused by heat and pressure) with porosities ranging from 0.094 to 0.533 m 3 m -3 . Reproducibility of sample handling and testing procedures was demonstrated using replicate measurements. Precision and accuracy of load cell measurements were assessed using mass balance calculations and indicated agreement within a few tenths of a percent of total mass. Computed values of sorptivity, S , ranged from 8.83 × 10 -6 to 4.55 × 10 -4 m s -0.5 . The developed method should prove useful for measuring imbibition rates on a wide range of porous materials.

Explore related subjects

Soil Science Society of America JournalArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M.D. Humphrey, J.D. Istok, L. E. Flint, A. L. Flint. 1996. Improved method for measuring water imbibition rates on low-permeability porous media. https://doi.org/10.2136/sssaj1996.03615995006000010007x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2021

The processes of preferential flow in the unsaturated zone

Preferential flow, a major influence in unsaturated soil and rock almost everywhere, occurs by multiple phenomenologically distinct hydraulic processes. For the mode known as funneled flow, concentrated in particularly conductive portions of the medium, the surface-tension/viscous-flow processes of traditional unsaturated flow theory predominate. Fingered flow, through conductive paths of higher water content than surrounding material, requires amendments to traditional theory concerning instabilities and dynamic flow-regime boundaries. Macropore flow, the most recognized preferential flow mode, poses unanswered questions and major difficulties in practice. Accumulated evidence shows that water flows preferentially mostly through macropores that are (a) only partially filled with water, and (b) surrounded by matrix material that is drier, sometimes much drier, than saturation. With partial filling, geometric characteristics such as aperture have much less influence than was previously thought, and the intra-macropore configuration of the flowing water phase, about which little is conclusively known, is then a dominant controlling influence. With unsaturated surroundings, macropore/matrix exchange interactions control, for given input and medium, the initiating circumstances, conveyed flux, and duration of macropore flow. The multiple processes in play during such interactions have different sensitivities to the matrix water state and different directions of influence. The net influence of matrix water content on macropore flow is thus highly complex and a major research need. Additional high-priority topics are: flowpath connectivity, for watersheds as well as small scales; intra-macropore processes, to discern their importance and possible means of quantification; and the identification of measurable soil and rock properties that can be utilized predictively.

Soil Science Society of America Journal↗
USGS2020

A hybrid approach for predictive soil property mapping using conventional soil survey data

Soil property maps are important for land management and earth systems modeling. A new hybrid point-disaggregation predictive soil property mapping strategy improved mapping in the Colorado River Basin, and can be applied to other areas with similar data (e.g. conterminous United States). This new approach increased sample size ~6-fold over past efforts. Random forests related environmental raster layers representing soil forming factors to samples to predict 15 soil properties (pH, texture fractions, rock, electrical conductivity, gypsum, CaCO3, sodium adsorption ratio, available water capacity, bulk density, erodibility, organic matter) at 7 depths, depth to restrictive layer, and surface rock size and cover. Cross-validations resulted in coefficient of determinations averaging 0.52, with a range of 0.20 to 0.76; and mean absolute errors ranged from 3% to 98% of training data averages with a mean of 41%. Uncertainty estimates were also developed by creating relative prediction intervals (RPIs) for the entire study area, which allow end users to evaluate uncertainty relative to original data distributions. Average error increased with higher RPI values (higher uncertainty), and areas with the highest RPI are consistently under-sampled, suggesting that additional sampling in these areas may improve prediction accuracy. Greater uncertainty was also observed in areas with shale parent materials and physiographic settings uncommon relative to the broader study area.

New Mexico, Colorado, Wyoming, Utah, Nevada, Arizo↗
USGS2018

Approaches for improving field soil identification

Use of soil survey information by non-soil-scientists is often limited by their inability to select the correct soil map unit component (COMP). Here, we developed two approaches that can be deployed to smartphones for non-soil-scientists to identify COMP from the location alone or location together with easily observed field data (i.e., slope, depth to the restrictive layer, and soil texture by depth). In addition, we also compared the two newly developed approaches with a traditional approach identifying COMP based on the dominant COMP (DC-based approach). All three approaches were tested with the Rapid Assessment of US Soil Carbon database and the combined USDA- NRCS Soil Survey Geographic database and the USDA-NRCS State Soil Geographic Database. The results indicated that the observation-based approach performed significantly better than the other two approaches, suggesting that a small set of easy-to-measure site-specific observations could significantly improve COMP identification. The location- and DC-based approaches had similar low performance overall. However, the location-based approach slightly improved identifications over the DC-based approach for cases where (i) there were multiple possible components within the soil map unit and (ii) the components were located in close proximity to a boundary of a different soil map unit polygon. The benefit of using the location-based approach may be greater in specific soil survey areas where topography was the major factor leading to the creation of the map unit legend.

Soil Science Society of America Journal↗