USGS Science⌕ Search
Home/Archive/USGS

USGS · 70016742

Geology and geochemistry of Summitville, Colorado: An epithermal acid sulfate deposit in a volcanic dome

J. E. Gray·M.F. Coolbaugh
View original source ↗Export metadata ↓

Abstract

Geologic studies during recent open-pit mining at Summitville, Colorado, have provided new information on an epithermal acid sulfate Au-Ag-Cu deposit formed in a volcanic dome. Geologic mapping, geochemical studies of whole-rock samples from blast holes, and geologic and geochemical traverse studies refine the details of the evolution of the Summitville deposit. Six distinct events followed emplacement of the quartz latite volcanic dome and define the development of the Summitville deposit: (1) an early stage of acid sulfate alteration, (2) subsequent Cu sulfide and gold mineralization, (3) widespread hydrothermal brecciation, (4) volumetrically minor, base metal sulfide-bearing barite veining, (5) volumetrically minor, kaolinite matrix brecciation, and finally, (6) supergene oxidation. Events 1 and 2 were the most important for the formation of the Summitville deposit. Acid sulfate altered rock is primarily found in the quartz latite volcanic dome rock and consists of vuggy silica (central), quartz-alunite, quartz-kaolinite, argillic, and propylitic (distal) zones. Ore deposition (event 2) of enargite, luzonite, covellite, pyrite, native sulfur, marcasite, and minor sphalerite, native gold, + or - barite and galena overprinted the acid sulfate altered rocks. Events 3, 4, and 5 are geologically important but rarely formed units large enough to be considered mineable ore by open-pit mining. The final supergene oxidation event affected much of the near-surface portion of the deposit and leached copper and sulfide minerals forming oxide zones. Near-surface oxide zones contain the highest Au grades and decrease progressively with depth.Fractures were important fbr localizing both the acid sulfate altered rock and ore deposition at Summitville. Such fracture control is apparent despite a lack of distinct throughgoing open-space quartz veins; instead, laterally and vertically extensive ore zones are identified by their highly silicified character that can be traced laterally for up to 500 m and vertically up to 200 m. Ore zones strike parallel to regional faults related to rifting and basin and range development, suggesting that hydrothermal fluids followed preexisting fractures. Ore zones follow two northwest trends, a N 30 degrees W + or - 20 degrees trend, and a N 60 degrees W trend. Most fractures and faults in the open pit dip steeply from 65 degrees to vertical. Ore zones intersect near the center of the deposit to form a large zone approximately 150 by 400 m. Ore zones form a rough radial pattern located near the center of the deposit and a discontinuous arcuate feature on the northern side. This radial pattern, arcuate feature, and the intersection of ore zones near the center of the deposit are probably related to the intrusion of a porphyry below the deposit. The overall low Au-grade, high-tonnage character of the Summitville deposit is related to low permeability in the quartz latite volcanic dome rock and absence of well-developed open-space hydrothermal veins.Gold analyses of development drill holes and blast hole samples, in conjunction with geologic mapping in the open pit, indicate that vuggy silica, quartz-alunite, and quartz-kaolinite altered rock constitute most of the Au ore. Vuggy silica averaged 2.4 ppm Au, quartz-alunite averaged 1.2 ppm Au, and quartz-kaolinite averaged 0.86 ppm Au during open-pit mining. Grades for argillically altered rock were usually below the ore cutoff of 0.34 ppm Au. Propylitically altered rock rarely contained detectable Au concentrations (0.03 ppm Au) and constituted only waste rock. Although volumetrically minor, event 4 base metal sulfide-bearing barite veins and event 5 kaolinite matrix breccias contained high Au grades (up to about 800 ppm Au), producing approximately 5 to 15 percent of the total Au mined in the deposit.Geochemical studies of samples collected across traverses of altered and mineralized ore zones indicate that Te, Bi, and Pb are characteristic trace elements, in addition to Au, Ag, Cu, and As that are typical of acid sulfate mineral deposits. Anomalous Te is associated with Cu sulfides and gold in vuggy silica zones. Anomalous Bi and Pb concentrations correlate most consistently with quartz-alunite zones. Thallium is also anomalous at Summitville. Highest concentrations of Tl are found in argillic rock, whereas silicified zones are depleted in it. The anomalous Tl in distal zones is similar to observations in some porphyry Cu systems. Pronounced lateral zonation of Ag/Au ratios is present in the deposit. The Ag/Au ratios vary from about 2:1 near the center of the orebody to greater than 20:1 on the periphery.The Summitville deposit is located in the midlevel portion of a mineralized volcanic dome, with a porphyry system at depth, and a hot springs environment at the surface. Drill holes through the volcanic dome intersected a quartz monzonite porphyry approximately 600 m below the surface that is altered to sericite and pyrite similar to some porphyry deposits. Laterally extensive cristobalite and opal replacing quartz latite are found southwest of the deposit and represent a hot-spring environment. Bedded siliceous sinter, some of which contains plant debris, overlies the cristobalite and opal at some localities. These deposits may represent surface vents for the fluids responsible for acid sulfate alteration or mineralization of the volcanic dome.

Explore related subjects

Economic GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. E. Gray, M.F. Coolbaugh. 1994-12-01. Geology and geochemistry of Summitville, Colorado: An epithermal acid sulfate deposit in a volcanic dome. https://doi.org/10.2113/gsecongeo.89.8.1906

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗