USGS Science⌕ Search

USGS · 70016001

Geometry of the September 1971 eruptive fissure at Kilauea volcano, Hawaii

Abstract

A three-dimensional model has been used to estimate the location and dimensions of the eruptive fissure for the 24-29 September 1971 eruption along the southwest rift zone of Kilauea volcano, Hawaii. The model is an inclined rectangular sheet embedded in an elastic half-space with constant displacement on the plane of the sheet. The set of "best" model parameters suggests that the sheet is vertical, extends from a depth of about 2 km to the surface, and has a length of about 14 km. Because this sheet intersects the surface where eruptive vents and extensive ground cracking formed during the eruption, this sheet probably represents the conduit for erupted lava. The amount of displacement perpendicular to the sheet is about 1.9 m, in the middle range of values measured for the amount of opening across the September 1971 eruptive fissure. The thickness of the eruptive fissure associated with the January 1983 east rift zone eruption was determined in an earlier paper to be 3.6 m, about twice the thickness determined here for the September 1971 eruption. Because the lengths (12 km for 1983 and 14 km for 1971) and heights (about 2 km) of the sheet models derived for the January 1983 and September 1971 rift zone eruptions are nearly identical, the greater thickness for the January 1983 eruptive fissure implies that the magma pressure was about a factor of two greater to form the January 1983 eruptive fissure. Because the September 1971 and January 1983 eruptive fissures extent to depths of only a few kilometers, the region of greatest compressive stress produced along the volcano's flank by either of these eruptive fissures would also be within a few kilometers of the surface. Previous work has shown that rift eruptions and intrusions contribute to the buildup of compressive stress along Kilauea's south flank and that this buildup is released by increased seismicity along the south flank. Because south flank earthquakes occur at significantly greater depths, i.e., from 5 to 13 km, than the vertical extent of the 1971 and 1983 eruptiv fissures, the depth of emplacement of these eruptive fissures cannot be the main factor in controlling the hypocentral depths of south flank earthquakes. Two possible explanations for the occurrence of south flank earthquakes in the depth range of 5-13 km are (1) a deeper pressure source, possibly related to deeper magma storage within the rift zone, and (2) a lowstrength region located between 5 and 13 km beneath Kilauea's south flank, possibly at the interface between oceanic sediments and the base of the Hawaiian volcanics. ?? 1990 Springer-Verlag.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J.J. Dvorak. 1990. Geometry of the September 1971 eruptive fissure at Kilauea volcano, Hawaii. https://doi.org/10.1007/bf00301531

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Examples of eruption response teams from the Alaska Volcano Observatory

During times of eruption response, volcano observatories need to organize themselves differently than during normal operations. The number of formal operational roles grows to ensure that critical responsibilities are covered, including management of all activities at the observatory as well as increased staffing to ensure proper surveillance of data and issuance of timely notices and warnings. The scope and approach differ for each observatory and, in fact, for different eruptions. The Alaska Volcano Observatory (AVO) maintains an extensive monitoring program and issues forecasts and warnings about volcanic eruptions and unrest in Alaska. Since 2000, AVO has used formal roles to perform these duties and has implemented a variety of team approaches to respond to larger eruptions. For the Augustine (2006) and Redoubt (2009) eruptions, management scaled from 3 up to ~ 8 people in a command team to cover all aspects of the response. During these and other eruptions (e.g., Okmok, 2008), an operations room was staffed continuously to cover real-time responsibilities pertaining to monitoring and issuing alerts while the command team focused on overall management. More recently, such as for Bogoslof in 2016–2017 and Shishaldin in 2019 and 2023, AVO used a virtual real-time response team to handle warning tasks and variations of an Observatory Volcanic Event Response Team (OVERT; Moran et al. 2024) to manage overall observatory response activities. In 2025, AVO employed a formal OVERT for the first time to oversee its response to unrest at Mount Spurr. Frequent implementation, nimble scaling, constant evaluation, flexibility, and good communication make the team approach effective. We present examples of several response teams used over the last 25 years, and lessons learned from them, in the hope that these will be helpful to other observatories facing crisis responses. These examples may also allow stakeholders and the public to better understand how observatories work.

Alaska↗

Timescales of cumulate mobilization and mixing for the 1868 A.D. eruption of Mauna Loa, Island of Hawai‘i

The deadly 1868 A.D. eruption of Mauna Loa’s lower Southwest Rift Zone (Island of Hawai‘i) included a M7.9 earthquake and associated tsunami and landslides, demonstrating the severe hazards posed by Earth’s largest active subaerial volcano. To better understand the relationship between intense seismic activity, dike emplacement, magma storage, transport histories, and mobilization of olivine cumulates at Mauna Loa, we examine compositional zoning of olivine in the 1868 lava flows. Samples range from basalt (< 10% olivine) to picrite (30–40% olivine). The olivine cargo is heterogeneous (Fo 78.2–89.2 ; forsterite = [Mg/(Mg + Fe) × 100]) but dominated by ~ Fo 89 cores that lie above the Fe-Mg equilibrium field of host glasses. Crystal rims < Fo 80 are due to post-eruptive modification in slow cooling lava flows. Minor element compositions fall within the range of other Mauna Loa olivine erupted in the past 200 years. Olivine crystals exhibit both normal and complex Fo zoning patterns that yield timescales of diffusive re-equilibration that range from 3 to 258 days, with 72% of crystals recording 71 days or less. These timescales correspond to magmatic priming of the summit reservoir system ~ 2 months prior to the eruption and the M7.9 earthquake likely facilitated the transport of the crystal-rich summit-derived magmas downrift shortly prior to eruption. If the recently proposed faster Fe-Mg diffusion coefficient is used, timescales instead range from < 1 day to 25 days, with most recording 1 week or less. In this scenario, most of the olivine zoning would have to have been generated after the M7.9 earthquake perturbed the system.

Hawaii↗

Geochemistry of the 2022 Mauna Loa eruption: A comparison with earlier historical summit reservoir eruptions, with implications for magma supply and recharge

On November 28th, 2022, following a record historical repose period of 38 years, Mauna Loa erupted about 145 × 10 6 m 3 of lava and tephra over a 15-day period. The eruption was confined to the summit caldera region and the upper Northeast Rift Zone and is remarkably homogeneous in composition in both time and space. In these respects, it is typical of prior shallow summit reservoir magma bodies, recently estimated to be at a depth of around 1–2 km beneath the caldera. In contrast with these earlier magma bodies, which typically contain 6.7–7.1% MgO and are perched at the low-MgO end of olivine-control trends, the 2022 lava and tephra are more evolved with 6.24 + / − 0.03% MgO. This implies a temperature difference of around 11 °C with the prior 1984 magma. The simplest explanation is that over 38 years, cooling and crystallization of the remaining 1984 magma body has significantly exceeded magma recharge, giving rise to the evolved 2022 magma. The problem with this model is that we know from a variety of geophysical observations that in those 38 years, Mauna Loa has been erratically inflating, with heightened periods since around 2000 attributed to magma recharge. To reconcile these differences, we suggest instead that the 1984 magma cooled and crystallized much more extensively, from 1166 °C to around 1106 °C, co-crystallizing plagioclase, clinopyroxene, pigeonite and subsequently enstatite instead of pigeonite. At this point, the residual 1984 magma would have an MgO content around 4.2% and been about 50% solidified. Subsequent recharge and mixing by dominantly reservoir magmas, derived from a deeper 3–4-km intermediate magma reservoir, eventually produced the 2022 magma.

Hawaii↗