USGS Science⌕ Search

USGS · 70015737

Subaqueous grain flows at the head of Carmel Submarine Canyon, California

Abstract

The head of Carmel Submarine Canyon lies in 15 m of water about 200 m off a coarse-sand beach in the southeast corner of Carmel Bay, California. Very coarse sand is the predominate material on the beach, adjacent shelf, and upper canyon-head slopes, while silt and clay cover the surface below a water depth of about 35 m. Along a shore-normal transect, median grain size decreases between the beach and canyon rim but increases down the upper canyon-head slope. On angle-of-repose slopes in the upper canyon head, downslope-coarsening deposits, which are everywhere there is active sand movement, are similar to a type of sediment gravity flow deposit formed by grain flows (sand avalanches). Using three sand fractions that were dyed different fluorescent colors, scuba divers generated sand avalanches that produced deposits similar to the natural deposits. The dyed-sand deposits, which extended as far as 25 m below the initiation point, were inversely graded and increased in grain size downslope. Inverse grading was well developed within two m of the initiation point, though the thicknesses of the three layers varied in a nonsystematic manner both across and down slope. The minor amount of native material found within the dyed-sand layers showed that entrainment of the underlying sand was minimal.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J.R. Dingler, R. J. Anima. 1989. Subaqueous grain flows at the head of Carmel Submarine Canyon, California. https://doi.org/10.1306/212f8f71-2b24-11d7-8648000102c1865d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Role of microbial processes in linking sandstone diagenesis with organic-rich clays

Numerous chemical reactions within clay sequences have been proposed to produce dissolved material for diagenesis of deeply-buried sands. However, reactions responsible for solubilizing inorganic and organic constituents in clays at intermediate depths, and their importance to sandstone diagenesis, have not been evaluated. Results from this study show that the processes of microbial organic-acid production (via fermentation) in clays and microbial organic-acid consumption (via sulfate reduction) in sands effectively link organic-rich clays to sandstone diagenesis in the Black Creek Formation of South Carolina. Diagenetic processes have resulted in the formation of 10 volume percent calcite cement, 0.1 volume percent authigenic pyrite, and 1.5 volume percent secondary porosity in Black Creek sands. However, the distribution of these diagenetic processes is not uniform, resulting in net destruction of porosity in some parts of the sand and net porosity enhancement in other parts. Mass balance-derived rates of microbial organic-acid production (10 (super -5) mmole carbon 1 (super -1) yr (super -1) ) and microbial CO 2 production (4 x 10 (super -5) mmole l (super -1) yr (super -1) ) show that microbial processes can account for all organic carbon in the calcite cements (at least 11% of carbonate carbon based on isotope-balance calculations), all observed authigenic pyrite, and all observed secondary porosity. These findings show that microbial processes can serve to link organic-rich clays with sandstone diagenesis at intermediate depths.

Journal of Sedimentary Petrology↗

Lithofacies analysis of colluvial sediments - an aid in interpreting the recent history of Quaternary normal faults in the Basin and Range Province, western United States

Inferring the frequency and magnitude of past earthquakes from the stratigraphy in exposures of normal-faulted sediments is difficult because colluvial lithofacies assemblages adjacent to faults are complex. Similarities in facies assemblages adjacent to young fault scarps in arid to semiarid areas, such as the Basin and Range province, allow lithofacies to be grouped into two genetic architectural elements: debris and wash elements. Upper and lower facies associations can commonly be recognized within each element. A lithofacies code scheme, similar to those used in the analysis of fluvial and glacial lithofacies sequences, provides a concise way of illustrating lithofacies relations in fault exposures. The source lithology of colluvial lithofacies is shown in the code, and soil-horizon symbols can be included. The architecture of lithofacies assemblages near fault scarps in semiarid areas is explained by a model of colluvial sedimentation in response to a single surface faulting event. Analysis of lithofacies assemblages exposed in three trenches across normal faults in the eastern Basin and Range shows how the model can be used to interpret fault histories. Similar facies analysis methods may be useful in interpreting colluvial sequences formed by non-tectonic processes.

Journal of Sedimentary Petrology↗

Mineralogy of the silt fraction in surficial sediments from the outer continental shelf off southeastern New England

The silt-sized heavy mineral assemblage, which is predominantly detrital, has been concentrated in this fraction by hydraulic factors and ranges between 11.8 wt. % of the silt fraction in the sandy sediments near Georges Bank to 3.4% in the clayey silt deposit south of Martha's Vineyard. By contrast, the sand fraction averages only 1.5% heavy minerals. Lateral variability within the silt-sized heavy mineral assemblage is considerable. Zircon and ilmenite abundances progressively decrease from east to west on the continental shelf off southeastern New England. Conversely, abundances within the amphibole and the epidote groups increase from east to west.

Journal of Sedimentary Petrology↗