Sedimentology and cyclicity in the Lower Permian De Chelly Sandstone on the Defiance Plateau: Eastern Arizona

J. D. Stanesco

Home/Archive/USGS

USGS · 70015049

Sedimentology and cyclicity in the Lower Permian De Chelly Sandstone on the Defiance Plateau: Eastern Arizona

J. D. Stanesco

View original source ↗Export metadata ↓

Abstract

The Lower Permian (Leonardian) De Chelly Sandstone crops out along a north-south trend on the Defiance Plateau of eastern Arizona. It is divided into lower and upper members separated by a tongue of the Supai Formation that pinches out to the north. Lithofacies in the De Chelly Sandstone consist of (1) a large-scale trough to tabular- and/or wedge-planar cross-stratified sandstone facies of large-scale eolian dune origin, (2) a small- to medium-scale, trough cross-stratified sandstone also of eolian dune origin, (3) a horizontally stratified, wind-rippled sandstone of sand sheet origin, (4) a wavy, horizontally stratified, wind-rippled sandstone of sabkha origin, and (5) a mud-draped ripple-laminated sandstone of mud-flat origin. The De Chelly Sandstone in the northern Defiance Plateau consists mainly of large-scale dune deposits. Stratigraphic sections in the middle of the plateau are dominated by small- to medium-scale dune and sand sheet deposits whereas those along the southern end of the plateau are composed largely of sabkha and supratidal mud-flat deposits. The lateral distribution of these facies suggests a north-south juxtaposition of central-erg, fore-erg, and mixed sabkha-supratidal depositional environments. Repetitive interbedding of facies in the De Chelly indicates at least twelve depositional cycles in which sabkha and/or supratidal to coastal-plain mud-flats were sequentially overridden by eolian sand sheets and cross-stratified dunes. Lateral and vertical facies relations within the lower and upper members of the De Chelly Sandstone record episodic expansion of the De Chelly erg southward, The comparative abundance of large-scale dune deposits in the upper member suggests that progradation was more extensive during latter stages of deposition. The intervening tongue of Supai Formation and the redbeds that overlie the upper member of the De Chelly at Bonito Canyon document northward transgression of sabkha and supratidal to coastal-plain mud-flat environments. Eolian dune deposition was restricted to the northern Defiance Plateau during deposition of these units.

Explore related subjects

Mountain Geologist Article

Source-reported bounding extent: 35.721987809328716° to 36.30848550829368° latitude; -109.599609375° to -109.05853271484374° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

J. D. Stanesco. 1991. Sedimentology and cyclicity in the Lower Permian De Chelly Sandstone on the Defiance Plateau: Eastern Arizona. https://pubs.usgs.gov/publication/70015049

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2020

Characterization of feed coals and coal combustion byproducts from the Wyodak-Anderson coal zone, Powder River Basin, Wyoming

The U.S. Geological Survey (USGS) determined the physical and chemical properties of more than 260 feed coal and coal combustion byproducts from two coal-fired power plants. These plants utilized a low-sulfur (0.23-0.47 wt. % S) and low ash (4.9-6.3 wt. % ash) subbituminous coal from the Wyodak-Anderson coal zone in the Tongue River Member of the Paleocene Fort Union Formation, Powder River Basin, Wyoming. Fifty-three samples of bituminous coal were collected and analyzed from a Kentucky power plant, which used several sources of bituminous coals from the Appalachian and Illinois Basins. Based on scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses of feed coal samples collected and analyzed from 1996 through the late 2000s, two mineral suites were identified: (1) a primary or detrital suite consisting of quartz (including beta-form grains), biotite, feldspar, and minor zircon; and (2) a secondary authigenic mineral suite containing alumino-phosphates (crandallite and gorceixite), kaolinite, carbonates (calcite and dolomite), quartz, anatase, barite, and pyrite. The detrital mineral suite is interpreted, in part, to be of volcanic origin, whereas the authigenic mineral suite is interpreted, in part, to be the result of the alteration of the volcanic minerals. The mineral suites have contributed to the higher amounts of barium, calcium, magnesium, phosphorus, sodium, strontium, and titanium in the Powder River Basin feed coals in comparison to eastern US coals. XRD analysis indicates that (1) fly ash is mostly aluminate glass, perovskite, lime, gehlenite, quartz, and phosphates with minor amounts of periclase, anhydrite, hematite, and spinel group minerals; and (2) bottom ash is predominantly quartz, plagioclase (albite and anorthite), pyroxene (augite and fassaite), rhodonite, and akermanite, and spinel group minerals. Microprobe and SEM analyses of fly ash samples revealed quartz, zircon, and monazite, euhedral laths of corundum with merrillite, hematite, dendritic spinels/ferrites, wollastonite, and periclase. The abundant calcium and magnesium mineral phases in the fly ash are attributed to the alteration of carbonate, clay, and phosphate minerals in the feed coal during combustion. The calcium- and magnesium-rich and alumino-phosphate mineral phases in the coal combustion byproducts can be attributed to volcanic minerals deposited in peat-forming mires. Dissolution and alteration of these detrital volcanic minerals occurred either in the peat-forming stage or during coalification and diagenesis, resulting in the authigenic mineral suite. The presence of free lime (CaO) in fly ash produced from Wyodak-Anderson coal acts as a self-contained “scrubber” for SO 3 , where CaO + SO 3 form anhydrite either during combustion or in the upper parts of the boiler. Considering the high lime content in the fly ash and the resulting hydration reactions after its contact with water, there is little evidence that major amounts of leachable metals are mobilized in the disposal or utilization of this fly ash.

Wyoming↗

USGS2020

Mineralogy and lithology of the Upper Cretaceous Niobrara Formation determined by hyperspectral core imaging

Sections of the Upper Cretaceous (Coniacian to Campanian) Niobrara Formation in two cores from Kansas and Colorado, the Amoco Rebecca Bounds and USGS Portland 1, respectively, were examined by hyperspectral core imaging and analysis. A spectral imaging system combining high-resolution photography (50 μm), 3D laser profiling (20 μm), and near-visible + short-wave infrared reflectance spectroscopy (wavelengths from 450 to 2500 nm, 500 μm pixel size) was applied to these cores to provide spectral and textural data facilitating creation of continuous mineral and lithology class maps. In addition, compositing of pixel-based results to group pixels to create mineralogical and lithological logs (0.5 ft resolution) was performed to facilitate comparisons to other geochemical datasets. The results show general correspondence in trends identified by previous geochemistry studies, with some exceptions due to instrumental limitations related to low reflectance of some rock intervals and the limited range of infrared wavelengths examined. This study provides a cursory overview of an extensive dataset meant to demonstrate the utility of hyperspectral core scanning to studies of mudrocks in petroleum systems as well as the kinds of information this technique can provide for detailed examination of stratigraphic features in sedimentary systems more generally.

Mountain Geologist↗

USGS2019

Controls on petroleum resources for the Devonian Marcellus Shale in the Appalachian Basin Province, Kentucky, West Virginia, Ohio, Pennsylvania, and New York

Greater than 33 trillion cubic feet of gas, 68 million barrels of natural gas liquids (NGL), and 192 million barrels of water have been produced from the Middle Devonian Marcellus Shale of the Hamilton Group in the Appalachian Basin. These volumes are from more than 11,700 non-commingled wells. Areas of greatest production and future potential for gas and NGL from the Marcellus Shale are within and near the northeast-trending Rome trough in northern West Virginia and Pennsylvania. Southernmost New York, eastern Ohio, western Virginia, and Maryland also contain petroleum potential and (or) reserves. A confluence of factors enhances gas and NGL reserves and resources in the Marcellus Shale. These include (1) brittleness based on lithofacies composition; (2) thickness and distribution of brittle and organic-rich shale; (3) measured thermal maturity of 1% vitrinite reflectance and greater; (4) at least 2 weight percent total organic carbon; (5) dense and complex fracturing and faulting; (6) presence of evaporite beds in the underlying Silurian Salina Group; (7) potential overpressure; (8) current depths of 1,370 m (4,500 ft) and greater; and (9) predominately horizontal wells with laterals that are oriented to the northwest or southeast, or roughly perpendicular to the direction of maximum horizontal stress, and that cross major fault and fracture sets.

Kentucky, West Virginia, Ohio, Pennsylvania, New Y↗