USGS Science⌕ Search
Home/Archive/USGS

USGS · 70014550

Ground-water recharge and its effects on nitrate concentration beneath a manured field site in Pennsylvania

J. M. Gerhart
View original source ↗Export metadata ↓

Abstract

Ground-water recharge to a shallow, unconfined, fractured dolomite aquifer underlying agricultural land in Lancaster County, Pennyslvania occurs by two mechanisms. Direct recharge occurs through pathways such as near-surface bedrock fractures and sinkholes, and affects dissolved nitrate concentration of ground water within two to three days; its effects last only about one week. Gradual recharge occurs through small channels and pores in the unsaturated zone and affects dissolved nitrate concentration for several weeks or more after the effects of direct recharge have dissipated. Whether recharge causes an increase or decrease in dissolved nitrate concentration depends on the amount of nitrogen-rich manure spread on the site prior to the storm. Direct recharge from a storm in March 1984, a month in which 18 tons of manure were spread, resulted in a rapid decrease in dissolved nitrate concentration of about 2.5 milligrams per liter (mg/l) as nitrogen. Direct recharge from a storm in May 1984, after 384 tons of manure had been spread in April, resulted in a rapid increase in dissolved nitrate concentration of about 3 mg/l as nitrogen. Concentration changes caused by gradual recharge several weeks or more after the storms were of the same magnitude as those caused by direct recharge during the storm.

Explore related subjects

GroundwaterArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. M. Gerhart. 1986. Ground-water recharge and its effects on nitrate concentration beneath a manured field site in Pennsylvania. https://pubs.usgs.gov/publication/70014550

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Computing flow-field distortion coefficients from well-construction and formation properties

Direct measurements of groundwater velocity made with borehole flowmeters in screened wells must be compensated for the effects of flow-field distortion (also known as borehole acceleration). A theoretical equation developed by Drost et al. (1968) and simple inputs describing hydraulic properties of well construction and geologic formation were programmed into an Excel workbook to facilitate computation by groundwater-flowmeter users. Tables describing the physical and hydraulic properties for well constructions and gravel pack media are provided with an example to facilitate use of the workbook. Groundwater flowlines converge or diverge as they pass from a geologic formation, through a gravel pack and well screen. The extent of flowline convergence or divergence and the value of the flow-field distortion coefficient is related to the relative changes in hydraulic conductivity of the well screen, gravel pack, and geologic formation. Convergence or divergence is accompanied by acceleration or deceleration of groundwater. Direct measurements of groundwater velocity at the center of the monitoring well can be adjusted to provide a more accurate estimate of velocity in the formation by applying a correction for flow-field distortion. Variables required to compute the flow-field distortion coefficient include the hydraulic conductivity of the gravel pack, well screen, and the geologic formation surrounding the well screen; the borehole radius, and the inside radius and outside radius of the well screen.

Groundwater↗
USGS2026

Predicting groundwater hydrochemical facies in three dimensions with random forest classification, USA

A random forest classification (RFC) model was developed to predict hydrochemical facies (HCFs) of groundwater in three dimensions across the conterminous United States (CONUS). Major-ion data from 152,673 sites were used to categorize groundwater into one of six HCFs (CaMg-HCO 3 , NaK-HCO 3 , CaMg-SO 4 , NaK-SO 4 , Cl, or Mixed). These six HCFs were used as targets for RFC modeling. Model features that represent relevant geochemical processes and/or physical conditions were derived from previously published data. Additional model features were specifically engineered to support this analysis: elevation of the bottom of a well relative to the base of drinking water (ERDW) and six flags that relate geologic units to HCFs. The most important model feature was ERDW. The model was used to map HCFs at a 1-km 2 resolution across CONUS and to depths of 400 m below the base of drinking water (which varies from 22 m to 2 km). Model predictions are consistent with expectations. CaMg-HCO 3 is predicted to occur near the water table in more humid settings, and areas underlain by carbonate or crystalline rocks. At depths below the base of drinking-water supplies, the model predicts a rapid transition from HCO 3 HCFs to Cl. Model predictions are accurate based on point data, and data averaged across hydrogeologic regions and with depth. Model predictions of HCFs could be used for multiple purposes, including the mapping of salinity and other groundwater characteristics.

Groundwater↗