USGS Science⌕ Search
Home/Archive/USGS

USGS · 70013001

The plumbotectonics of the West Shasta mining district, eastern Klamath Mountains, California

B. R. Doe·M.H. Delevaux·J. P. Albers
View original source ↗Export metadata ↓

Abstract

The tectonic setting comprising the West Shasta mining district has often been compared with that of primitive island arcs. Concentrations of uranium, thorium, and lead and lead isotope compositions were determined for Devonian ores and rocks of the West Shasta district, eastern Klamath Mountains, California, to help evaluate the tectonic classification. The lead isotope pattern is found to be complex. From comparison of the data with those on younger ores and rocks in the region and with those isotopic patterns found in modern tectonic terranes, however, a number of conclusions are possible. A lead isotope point for the Devonian oceanic mantle is now well established from this study on the West Shasta district. This isotopic composition is in agreement with that suggested by Slawson in 1983--i.e., from a sample of massive sulfide ore from the Golinsky deposit--with a 206 Pb/ 204 Pb of 17.830, a 207 Pb/ 204 Pb of 15.450, and a 208 Pb/ 204 Pb of 37.313. If the Devonian mantle is analogous to the modern mantle, the determined value is probably at the more radiogenic end of the Devonian oceanic mantle array.Some samples of volcanic rocks and ores that have elevated values of 207 Pb/ 204 Pb and 208 Pb/ 204 Pb indicate that subducted pelagic sediments or interaction of the magmas with other sediments downsection have been involved to varying degrees in the generation of magmas. The high ratios were not attained by addition of lead to the volcanic rocks or ores during subsequent magmatic events, such as intrusion of the Permian Pit River stock to the east or of the Cretaceous Shasta Bally batholith that crops out to the south and west and may underlie part of the district. Some values of 207 Pb/ 204 Pb are sufficiently high as to suggest that West Shasta may have developed nearer a continent than was previously supposed. Lead isotope data for Quaternary volcanic rocks are somewhat more radiogenic than for Cretaceous ores and plutonic rocks. Permo-Triassic ores are again a bit less radiogenic. The isotopic differences between the Permo-Triassic and Quaternary data could be accounted for by a value for 238 U/ 204 Pb of 10.42 in common source material. Using this value of 238 U/ 204 Pb to calculate even further back to 400 m.y., the resulting ratios are found to fall very close to the "best value" for the lead isotope mixing line between the Devonian mantle and pelagic sediments. We interpret this intersection to be the "mean value" for the assimilated Devonian sediment lead--18.250 for 206 Pb/ 204 Pb and 15.582 for 207 Pb/ 204 Pb. As deduced for the lead isotope composition for the Devonian mantle at this location, the pelagic sediment, lead isotope composition also is toward the more radiogenic end of the values expected for pelagic sediments in the Devonian. Lack of sediments in the observed volcanic section of the West Shasta district suggests a submerged volcanic-arc setting (as interpreted by others for the Troodos and Samail ophiolites) rather than an island-arc situation (such as the Green Tuff area of Japan) or an incipient spreading ridge setting (that might have grown to be a subaerial Iceland). The elevated values of 207 Pb/ 204 Pb for some samples suggest a submerged volcanic are whereas the exceedingly low values of thorium--which is not easily mobilized during alteration events--for both basaltic andesites and plagiorhyolites is suggestive of depleted source material such as is found for most oceanic spreading centers. Elevated values of 207 Pb/ 204 Pb are exceedingly rare in midocean ridge basalts and low contents of thorium are known in island arcs, so a submerged volcanic arc is the preferred interpretation. Some similarity exists between the 206 Pb/ 204 Pb values of Devonian ores having elevated values of 207 Pb/ 204 Pb and those of the Permo-Triassic ores of the East Shasta district, as mentioned by Slawson in 1983. This similarity is now confirmed to be a coincidence. We find it due first of all to some incorporation of sediment lead in the magmas, followed later by some migration of radiogenic lead--probably locally derived--into the ores during subsequent events. Because there was some postdepositional lead migration into the ores, some migration of copper also into the ores cannot be excluded. Lead, especially radiogenic lead, however, is more mobile than copper. As the migrating lead is deduced to have been locally derived from the observed section rather than exotically derived, any copper added was probably locally derived also.

Explore related subjects

Economic GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B. R. Doe, M.H. Delevaux, J. P. Albers. 1985-12-01. The plumbotectonics of the West Shasta mining district, eastern Klamath Mountains, California. https://doi.org/10.2113/gsecongeo.80.8.2136

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗