USGS Science⌕ Search
Home/Archive/USGS

USGS · 70012228

Surface erosion caused on Mars from Viking descent engine plume

R.E. Hutton·H. J. Moore·R.F. Scott·R.W. Shorthill·C.R. Spitzer
View original source ↗Export metadata ↓

Abstract

During the Martian landings the descent engine plumes on Viking Lander 1 (VL-1) and Viking Lander 2 (VL-2) eroded the Martian surface materials. This had been anticipated and investigated both analytically and experimentally during the design phase of the Viking spacecraft. This paper presents data on erosion obtained during the tests of the Viking descent engine and the evidence for erosion by the descent engines of VL-1 and VL-2 on Mars. From these and other results, it is concluded that there are four distinct surface materials on Mars: (1) drift material, (2) crusty to cloddy material, (3) blocky material, and (4) rock. ?? 1980 D. Reidel Publishing Co.

Explore related subjects

The Moon and the PlanetsArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R.E. Hutton, H. J. Moore, R.F. Scott, R.W. Shorthill, C.R. Spitzer. 1980. Surface erosion caused on Mars from Viking descent engine plume. https://doi.org/10.1007/bf00902045

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1981

Ridges and scarps in the equatorial belt of Mars

The morphology and distribution of ridges and scarps on Mars in the ± 30° latitude belt were investigated. Two distinct types of ridges were recognized. The first is long and linear, resembling mare ridges on the Moon; it occurs mostly in plains areas. The other is composed of short, anastomosing segments and occurs mostly in ancient cratered terrain and intervening plateaus. Where ridges are eroded, landscape configurations suggest that they are located along regional structures. The age of ridges is uncertain, but some are as young as the latest documented volcanic activity on Mars. The origins of ridges are probably diverse-they may result from wrinkling due to compression or from buckling due to settling over subsurface structures. The similar morphologic expressions of ridge types of various origins may be related to a similar deformation mechanism caused by two main factors: (1) most ridges are developed in thick layers of competent material and (2) ridges formed under stresses near a free surface.

The Moon and the Planets↗
USGS1980

Morphology of Lonar Crater, India: Comparisons and implications

Lonar Crater is a young meteorite impact crater emplaced in Deccan basalt. Data from 5 drillholes, a gravity network, and field mapping are used to reconstruct its original dimensions, delineate the nature of the pre-impact target rocks, and interpret the emplacement mode of the ejecta. Our estimates of the pre-erosion dimensions are: average diameter of 1710 m; average rim height of 40 m (30-35 m of rim rock uplift, 5-10 m of ejected debris); depth of 230-245 m (from rim crest to crater floor). The crater's circularity index is 0.9 and is unlikely to have been lower in the past. There are minor irregularities in the original crater floor (present sediment-breccia boundary) possibly due to incipient rebound effects. A continuous ejecta blanket extends an average of 1410 m beyond the pre-erosion rim crest. In general, 'fresh' terrestrial craters, less than 10 km in diameter, have smaller depth/diameter and larger rim height/diameter ratios than their lunar counterparts. Both ratios are intermediate for Mercurian craters, suggesting that crater shape is gravity dependent, all else being equal. Lonar demonstrates that all else is not always equal. Its depth/diameter ratio is normal but, because of less rim rock uplift, its rim height/diameter ratio is much smaller than both 'fresh' terrestrial and lunar impact craters. The target rock column at Lonar consists of one or more layers of weathered, soft basalt capped by fresh, dense flows. Plastic deformation and/or compaction of this lower, incompetent material probably absorbed much of the energy normally available in the cratering process for rim rock uplift. A variety of features within the ejecta blanket and the immediately underlying substrate, plus the broad extent of the blanket boundaries, suggest that a fluidized debris surge was the dominant mechanism of ejecta transportation and deposition at Lonar. In these aspects, Lonar should be a good analog for the 'fluidized craters' of Mars. ?? 1980 D. Reidel Publishing Co.

The Moon and the Planets↗
USGS1978

The moon: Composition determined by nebular processes

The bulk composition of the Moon was determined by the conditions in the solar nebula during its formation, and may be quantitatively estimated from the premise that the terrestrial planets were formed by cosmochemical processes similar to those recorded in the chondrites. The calculations are based on the Ganapathy-Anders 7-component model using trace element indicators, but incorportate improved geophysical data and petrological constraints. A model Moon with 40 ppb U, a core 2% by weight (1.8% metal with ???35% Ni and 0.2% FeS) and Mg/(Fe2++Mg)?????0.75 meets the trace element restrictions, and has acceptable density, heat flow and moment of inertia ratio. The high Ni content of the core permits low-Ti mare basalts to equilibrate with metal, yet still retain substantial Ni. The silicate resembles the Taylor-Jakes?? composition (and in some respects the waif Ganapathy-Anders Model 2a), but has lower SiO2. Minor modifications of the model composition (U=30-35 ppb) yield a 50% melt approximating Apollo 15 green glass and a residuum of olivine plus 3 to 4% spinel; the low SiO2, favors spinel formation, and, contrary to expectation, Cr is not depleted in the liquid. There may no longer be any inconsistency between the cosmochemical approach and arguments based on experimental petrology. ?? 1978 D. Reidel Publishing Company.

The Moon and the Planets↗