USGS Science⌕ Search
Home/Archive/USGS

USGS · 70010992

Determination of active oxygen in the presence of barium and lead

M. Fleischer
View original source ↗Export metadata ↓

Abstract

The method of Mrgudich and Clark is modified by substituting 5 per cent (by volume) perchloric acid for 50 per cent perchloric acid. Titration by potassium permanganate may be substituted for electrometric titration with ceric sulfate.

Explore related subjects

Industrial and Engineering ChemistryArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

M. Fleischer. 2002-05-01. Determination of active oxygen in the presence of barium and lead. https://doi.org/10.1021/i560113a015

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2002

Determination of ash in coals unusually high in calcite and pyrite

The preliminary hearth heating method (A and E) gave results within the A. S. T. M. tolerances for all duplicates obtained in the same laboratory. Checks between different laboratories within A. S. T. M. tolerances were obtained for coals containing up to about 3.6 per cent mineral carbon dioxide, but these ashes contained larger amounts of retained sulfur. The determination of ash by the cold furnace method (B and F) gave duplicate results within A. S. T. M. tolerances for all samples in the U. S. Bureau of Mines laboratory and for samples up to about 1.6 per cent mineral carbon dioxide content in the Illinois Geological Survey laboratory. Checks between average values from the two laboratories were within A. S. T. M. tolerances for all samples.

Industrial and Engineering Chemistry↗
USGS2002

Use of phosphate for separation of cobalt from iron

The well-known tendency of cobalt to be retained by the iron-alumina precipitate produced by ammonia has generally been ascribed to a specific adsorption by the large surface of this gelatinous precipitate. Whatever its cause, it can be overcome by precipitating the iron as phosphate at a pH of 3.5. The precipitate is easily filterable and practically all the cobalt passes into the filtrate.

Industrial and Engineering Chemistry↗
USGS2002

Determination of small amounts of molybdenum in tungsten and molybdenum ores

A rapid method has been developed for the determination of small amounts of molybdenum in tungsten and molybdenum ores. After removing iron and other major constituents the molybdenum thiocyanate color is developed in water-acetone solutions, using ammonium citrate to eliminate the interference of tungsten. Comparison is made by titrating a blank with a standard molybdenum solution. Aliquots are adjusted to deal with amounts of molybdenum ranging from 0.01 to 1.30 mg.

Industrial and Engineering Chemistry↗