USGS Science⌕ Search

USGS · 70010557

Paleohydrological methods and some examples from Swedish fluvial environments I. Cobble and boulder deposits

Abstract

This article establishes approximate empirical relations for determining the minimum unit stream power, bed shear stress and mean flow velocity capable of moving cobbles and boulders on streambeds. The derived equations then are used to estimate the minimum paleoflows that could have transported the boulders of two ancient fluvial deposits in Sweden. The flow estimates are compared with those made by more conventional hydraulic methods. Bankfull flows also are estimated for one of the two deposits, using various hydraulic equations.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 55.36174° to 69.10625° latitude; 11.02737° to 23.90338° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G. P. Williams. 2017-08-08. Paleohydrological methods and some examples from Swedish fluvial environments I. Cobble and boulder deposits. https://doi.org/10.1080/04353676.1983.11880088

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Paleohydrological methods and some examples from Swedish fluvial environments. II - River meanders

Empirical relations are developed between river-meander features and water-discharge characteristics for 19 reaches along Swedish rivers. In these relations, either average channel width or average radius of curvature of meander arcs can be used to estimate average annual peak discharge and average daily discharge. By accepting certain assumptions, the relations can be applied to other meandering Swedish rivers, present or ancient. The Öster-Dalälven River near Mora is used as an example.

Geografiska Annaler, Series A↗

A rainfall intensity-duration threshold for landslides in a humid- tropical environment, Puerto Rico

Landslides are triggered by factors such as heavy rainfall, seismic activity, and construction on hillslopes. The leading cause of landslides in Puerto Rico is intense and/or prolonged rainfall. A rainfall threshold for rainfall-triggered landsliding is delimited by 256 storms that occurred between 1959 and 1991 in the central mountains of Puerto Rico, where mean annual rainfall is close to or in excess of 2,000 mm. Forty one of the 256 storms produced intense and/or prolonged rainfall that resulted in tens to hundreds of landslides. A threshold fitted to the lower boundary of the field defined by landslide-triggering storms is expressed as I = 91.46 D -0.82 where I is rainfall intensity in millimeters per hour, and D is duration in hours. Landslide-producing storms occurred at an average rate of 1.2 per year. In general the landslides triggered by short-duration, high-intensity rainfall events were mainly shallow soil slips and debris flows, while the long-duration, low-intensity rainfall produced larger, deeper debris avalanches and slumps. For storms that had durations of up to 10 h, landsliding did not occur until rainfall intensity was as much as three times as high as the rainfall intensity reported as sufficient to trigger landsliding in temperate regions. As storm durations approach 100 h, the rainfall conditions necessary to initiate landsliding in Puerto Rico converge with those defined for temperate regions. A comparison of the Puerto Rico threshold with rainfall data from other humid-tropical regions suggests that the threshold developed for Puerto Rico may be applicable to other similar environments throughout the world.

Puerto Rico↗