USGS Science⌕ Search

USGS · 70010397

Preliminary results from comparisons of redundant tiltmeters at three sites in central California

Abstract

The U.S. Geological Survey has been operating a network of shallow-borehole tiltmeters in central California since June 1973. At six sites redundant instruments have been installed as a check on data coherency. These include the Sage Ranch, Tres Pinos, New Idria, Aromas, Bear Valley and San Juan Bautista tiltmeter sites. Preliminary results from the comparison of redundant data from the Aromas, Bear Valley and San Juan Bautista sites for periods of eight, three and seven months respectively, suggest that short period tilt signals in the range 5 min < T < 3–5 h and ranging in amplitude from 5 · 10 −8 to 10 −6 rad, but not including step offsets, show excellent agreement on closely spaced instruments. Agreement is not as good in this period range for instruments at San Juan Bautista with a separation of 200 m. Signals of interest observed in this period range include coseismic tilts, teleseisms and tilts associated with creep events. Tilt signals in the period range 3–5 h < T < 2– 5 weeks are not always coherent at all three of the redundant tilt sites studied. Tilt signals in this period range have amplitudes up to 5 · 10 −6 rad and wavelengths down to at least the instrument separation at the closely spaced sites (~several meters). Regarding longerterm coherency, the instruments at San Juan Bautista with 200-m spacing, agree within 0.5 μrad for the N-S component and 0.7 jurad for the E-W component for a period of two months. The closely spaced redundant instruments at Aromas agree within 2 μrad for the N-S component and 1 μrad for the E-W component for the eight-month period of operation. Data from the three sites have been checked for effects of temperature, atmospheric pressure and rainfall. The latter appears to be critically site dependent. The worst case tilts for 1 inch of rainfall can be more than 1 jurad with a duration of a few days to a week. Typical rain-induced tilts are less than 0.3 μrad for 1 inch of rain. The two instruments at the Sage Ranch site have been in operation for the longest period. However, they have shown local site or ground instability, high drift and lack of coherency since installation. Data are not yet available from the Tres Pinos or New Idria instruments. Deeper installation appears necessary for these instruments and two alternative methods of tiltmeter emplacement are currently being tested in an attempt to evaluate the depth, spatial and temporal dependency of surface tilt sources.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 34.755138798294126° to 39.74652068412203° latitude; -123.68412524926487° to -118.27900785160426° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C.E. Mortensen, M.J.S. Johnston. 1979. Preliminary results from comparisons of redundant tiltmeters at three sites in central California. https://doi.org/10.1016/0040-1951(79)90208-7

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

GST-1: A high-resolution global sediment thickness model

Global Sediment Thickness 1 (GST-1) is a high-resolution sedimentary thickness model calculated on a 0.125° x 0.125° grid. It modifies the sediment thickness of the 1° x 1° Earth Crustal Model 1 (ECM1) by means of 3D inversions of free air gravity anomalies. GST-1 is calculated by performing structural inversions on high-density contrasts across two crustal boundaries: the sediment – basement interface and the crystalline crust – upper mantle interface. The inversions are calculated in each of ten overlapping 3D models that span the globe. These ten models are merged to obtain the GST-1 global model, providing an eight-fold increase in lateral spatial resolution in comparison with ECM1 and CRUST 1.0. Our sediment thickness model exploits the nearly continuous sampling of gravity data when compared to the irregular, sparse sampling of seismic refraction data. Sediment thickness values in GST-1 are in excellent agreement with independently derived cross sections from well-studied sedimentary basins, and within expected resolution limits of seismic refraction data. GST-1 offers a robust, high resolution global model of sedimentary thickness to support studies of sedimentary basins.

Tectonophysics↗

Re-examination of the 1958 Huslia earthquake sequence and regional tectonics of the northwestern Koyukuk Basin, Alaska

In 1958 a M w 6.8 (M S = 7.3) mainshock and two M w ∼ 5.9 aftershocks occurred near the village of Huslia in the remote Koyukuk Basin of northern interior Alaska, with no surface faulting recognized afterward. This region lies in a transitional zone between compressional tectonics associated with the collision of the Pacific and Yakutat plates with North America and the extrusion of western Alaska. Since 1969 several earthquake swarms with M w 4–5 events have occurred ∼50 km northwest of Huslia in the western Purcell Mountains, including a swarm in 2019–2022 with over 9500 events. Previous waveform modeling studies conducted 30 years ago suggest the 1958 mainshock occurred on a northeast-trending normal fault. This sense of rupture is inconsistent with focal mechanisms and trends of post-1973 seismicity in the 1958 epicentral region that indicate strike-slip motion along northwest or southeast trending faults. A recently mapped east-west striking fault scarp along the southern front of the Purcell Mountains is also inconsistent with northeast-striking normal faulting. To better characterize the 1958 sequence and its relation to the regional tectonics, we measured scarp profiles across the Purcell Mountains scarp, relocated pre-1974 seismicity, analyzed first motions of pre-1974 events, and modeled potential fields (gravity, magnetics) geophysical data. Our results suggest complex regional deformation occurs along east-west, north-south and northwest-southeast trending strike-slip faults and northwest-southeast trending normal faults. The Purcell Mountains swarm may be related to hydrothermal activity as several hot springs surround the region.

Alaska↗

Fairweather transform boundary Oligocene to present orogenesis: Fairweather Range vertical extrusion and rotation of the Yakutat microplate at ca. 3 Ma

Oblique-slip along transform fault boundaries is often partitioned between a strike-slip system and thrust faults that accommodate contraction. However, topography along the Yakutat-North American transform (Fairweather fault), is asymmetric with low-terrain above active thrusts on the western, Yakutat side of the transform and high topography on the continental side with peaks >4500 m (Mount Fairweather: 4671 m) to the west of the Border Ranges fault, limited recorded earthquakes >M4, and no apparent reverse faults to generate the highest terrain. In this study we compile, for the first time, published U-Pb zircon, 40 Ar/ 39 Ar and K-Ar (hornblende, muscovite, and biotite) and U-Th/He and fission-track (zircon and apatite) bedrock ages (109) from 75 samples to investigate the exhumation history of the Fairweather Range region, complemented by a published detrital sample (ZFT and AFT) and 13 new 40 Ar/ 39 Ar (hornblende, biotite, and K-feldspar) ages on 9 bedrock samples from both sides of the Fairweather fault. Additionally, we examined published seismicity and geodetic data of the Fairweather region and assessed if plate paleo-vectors correlate with the cooling history of the Fairweather Range. Cooling age, seismic, and block-motion patterns indicate the Fairweather Range has been vertically extruded between the Fairweather and the Border Ranges faults as a coherent block since ca. 25 Ma. The pre-6 Ma Pacific plate motion (N30°W) aligns with the N33°W strike of the Fairweather Fault whereas a hypothetical pre-6 Ma Yakutat microplate paleo-vector of (N39°W) does not: indicating a post-6 Ma timing for Yakutat microplate counter-clockwise rotation (9°). We infer that rotation and impingement of the Yakutat microplate along the Fairweather fault at ca. 3 Ma led to the development of the Fairweather restraining bend and increased cooling rates. The resultant thickened Fairweather welt and the ∼30 km thick southeast end of the Yakutat microplate compounded double-indenter tectonics into Alaska's southeast convergent corner

Tectonophysics↗