Structural development of high-temperature mylonites in the Archean Wyoming province, northwestern Madison Range, Montana

Karl S. Kellogg; David W. Mogk

doi:10.2113/gsrocky.44.2.85

Home/Archive/USGS

USGS · 70003754

Structural development of high-temperature mylonites in the Archean Wyoming province, northwestern Madison Range, Montana

Karl S. Kellogg·David W. Mogk

View original source ↗Export metadata ↓

Abstract

The Crooked Creek mylonite, in the northwestern Madison Range, southwestern Montana, is defined by several curved lenses of high non-coaxial strain exposed over a 7-km-wide, northeast-trending strip. The country rocks, part of the Archean Wyoming province, are dominantly trondhjemitic to granitic orthogneiss with subordinate amphibolite, quartzite, aluminous gneiss, and sills of metabasite (mafic granulite). Data presented here support an interpretation that the mylonite formed during a period of rapid, heterogeneous strain at near-peak metamorphic conditions during an early deformational event (D 1 ) caused by northwest–southeast-directed transpression. The mylonite has a well-developed L-S tectonite fabric and a fine-grained, recrystallized (granoblastic) texture. The strong linear fabric, interpreted as the stretching direction, is defined by elongate compositional “fish,” fold axes, aligned elongate minerals, and mullion axes. The margins of the mylonitic zones are concordant with and grade into regions of unmylonitized gneiss. A second deformational event (D 2 ) has folded the mylonite surface to produce meter- to kilometer-scale, tight-to-isoclinal, gently plunging folds in both the mylonite and country rock, and represents a northwest–southeast shortening event. Planar or linear fabrics associated with D 2 are remarkably absent. A third regional deformational event (D 3 ) produced open, kilometer-scale folds generally with gently north-plunging fold axes. Thermobarometric measurements presented here indicate that metamorphic conditions during D 1 were the same in both the mylonite and the country gneiss, reaching upper amphibolite- to lower granulite-facies conditions: 700 ± 50° C and 8.5 ± 0.5 kb. Previous geochronological studies of mylonitic and cross-cutting rocks in the Jerome Rock Lake area, east of the Crooked Creek mylonite, bracket the timing of this high-grade metamorphism and mylonitization between 2.78 and 2.56 Ga, nearly a billion years before the 1.78-Ga Big Sky orogeny, which overprinted the basement rocks exposed in adjacent ranges of the Wyoming province.

Explore related subjects

Rocky Mountain Geology Article

Source-reported bounding extent: 44.99588261816546° to 45.644768217751924° latitude; -112.06054687499999° to -110.74218749999999° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Karl S. Kellogg, David W. Mogk. 2009-11-24. Structural development of high-temperature mylonites in the Archean Wyoming province, northwestern Madison Range, Montana. https://doi.org/10.2113/gsrocky.44.2.85

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

Provenance of Devonian-Carboniferous strata of Colorado: The influence of the Cambrian and the Proterozoic

We report new LA-ICPMS U-Pb detrital zircon ages and sedimentary petrology of silty to sandy limestones and dolostones, as well as calcareous to dolomitic sandstones of the Devonian-Carboniferous (Mississippian) Chaffee Group, as well as detrital zircon ages from the Late Cambrian Sawatch Quartzite and a U-Pb zircon crystallization age on a late Mesoproterozoic (1087.9 13.5 Ma) granitoid of underlying basement from the Eagle basin of Colorado. Grain populations in the Chaffee Group are mostly bimodal, with over 84% of zircons centered around a Paleoproterozoic (ca. 1.78 Ga) mode typical of the Yavapai Province that forms much of the basement of Colorado and an early Mesoproterozoic (ca. 1.42 Ga) mode typical of A-type granites that intrude this region. A notable late Mesoproterozoic (ca. 1.08 Ga) mode exists in some Chaffee samples, giving those samples a trimodal detrital zircon age distribution. These bipartite or tripartite detrital zircon age modes exist in Cambrian, Devonian and Carboniferous strata from paleogeographically adjacent successions, but the correlation between the Chaffee zircons is highest with the regions basal Cambrian sandstones (Sawatch, Flathead, Ignacio formations) which have similar (1.08 Ga, 1.43 Ga, 1.71 Ga) zircon populations and a paucity of >1.8 Ga grains. This similarity suggests that the majority of grains in the Chaffee Group derive from recycling of these basal sandstones, and that little sediment was derived directly from then-exposed Precambrian basement highs, from the Wyoming Craton to the north, or from Paleoproterozoic arcs and orogens to the west and northeast. Minor Mesoarchean to early Paleoproterozoic (ca. 3.00 to 2.40 Ga) grains exist in the Chaffee Group, an attribute shared by the Late Ordovician Harding Sandstone of Colorados Front Range, but that is absent from the regions underlying Cambrian sandstonessuggesting some recycled mixture of Cambrian and Ordovician sedimentary rocks. No near-depositional age grains are present in the Chaffee Group; the youngest grain is Early Devonian (~417 Ma), >45 m.y. older than these strata, and Paleozoic grains are extremely uncommon (<0.1%; n=2927 grains).

Colorado↗

USGS2019

A shallow rift basin segmented in space and time: The southern San Luis Basin, Rio Grande rift, northern New Mexico, U.S.A.

Interpretation of gravity, magnetotelluric, and aeromagnetic data in conjunction with geologic constraints reveals details of basin geometry, thickness, and spatiotemporal evolution of the southern San Luis Basin, one of the major basins of the northern Rio Grande rift. Spatial variations of low-density basin-fill thickness are estimated primarily using a 3D gravity inversion method that improves on previous modeling efforts by separating the effects of the low-density basin fill from the effects of pre-rift rocks. The basin is found to be significantly narrower—and more complex in the subsurface—than indicated or implied by previous modeling efforts. The basin is also estimated to be significantly shallower than previously estimated. Five distinct subbasins are recognized within the broader southern San Luis Basin. The oldest and shallowest subbasin is the Las Mesitas graben along the northwestern basin margin, formed during the Oligocene transition from Southern Rocky Mountain volcanic field magmatism to rifting. In this subbasin, sediments are estimated to reach a maximum thickness of ~400 m within a north–south elongated structural depression. Other subbasins that likely initially developed during the Miocene are the dominant tectonic features in the southern San Luis Basin. This includes the Tres Orejas subbasin, which formed in the southwestern portion of the basin by the Embudo fault zone and a hypothesized fault zone along its western margin. This subbasin reaches a maximum thickness of ~2 km, as indicated by magnetotelluric and gravity modeling. The Sunshine Valley, Questa, and Taos subbasins occupy the eastern part of the southern San Luis Basin. The southern Sangre de Cristo fault zone is the dominant tectonic feature that controlled their development after ~20 Ma. The east-down Gorge fault zone controlled the western margins of significant parts of these eastern subbasins, although much of the Taos subbasin may be superimposed on the Tres Orejas subbasin. Maximum low-density basin-fill thicknesses are estimated to be 1.2 km for the Sunshine Valley subbasin, 800 m for the Questa subbasin, and 1.8 km for the Taos subbasin. Subbasin-forming tectonic activity along the Gorge fault zone and within the Tres Orejas subbasin ceased by the end of the development of the largely Pliocene Taos Plateau volcanic field. After that, rift-related subsidence became more narrowly centered on the eastern margin of the basin, controlled mainly by the linked Embudo and southern Sangre de Cristo fault zones.

New Mexico↗

USGS2018

40Ar/39Ar geochronology and petrogenesis of the Table Mountain Shoshonite, Golden, Colorado, U.S.A.

The Upper Cretaceous and Lower Paleogene Table Mountain Shoshonite lava flows and their proposed source, the Ralston Buttes intrusions, provide insight into the volcanic history of the Colorado Front Range. This study affirms the long-held hypothesis linking the extrusive Table Mountain lava flows and their intrusive equivalents at Ralston Buttes through major- and trace- element geochemistry. Systematic 40 Ar/ 39 Ar geochronology from all flows and intrusive units refines the eruptive history, improves precision on previously reported ages, and provides tighter constraints on the position of the K-Pg boundary in this location. Four flows are recognized on North and South Table mountains outside of Golden, Colorado. Flow 1 (66.5 ± 0.3 Ma, all ages reported with 2σ uncertainty) is the oldest, most compositionally distinct flow and is separated from younger flows by approximately 35 m of sedimentary deposits of the Denver Formation. Stratigraphically adjacent flows 2 (65.8 ± 0.2 Ma), 3 (65.5 ± 0.3 Ma), and 4 (65.9 ± 0.3 Ma) are compositionally indistinguishable. Lavas (referred to here as unit 5) that form three cone-shaped structures (shown by this study to be volcanic vents of a new unit 5) on top of North Table Mountain are compositionally similar to other units, but yield an age almost 20 m.y. younger (46.94 ± 0.15 Ma). Geochemistry and geochronology suggest that the rim phase of the Ralston plug (65.4 ± 0.2 Ma) is a reasonable source for flows 2, 3, and 4. All units are shoshonites—potassic basalts containing plagioclase, augite, olivine, and magnetite phenocrysts—and plot in the continental-arc field in tectonic discrimination diagrams. A continental-arc setting coupled with Late Cretaceous to early Paleogene ages suggest the high-K magmatism is associated with Laramide tectonism.

Colorado↗