USGS Science⌕ Search

EXPLORE THE ARCHIVE

Research about Wisconsin

Source-linked reports with geographic coverage including Wisconsin.

8 recordsLinked to original sources
USGS2026

Estimating the importance of floating surface material to the total phosphorus transport in Silver Creek, Wisconsin using Particle Image Velocimetry

Various techniques are used to estimate nutrient delivery in streams that combine flow and water-quality data. However, the transport of surface floating material is difficult to measure, and is therefore typically neglected when stream sampling and in the estimated nutrient delivery. Here, we describe an approach to estimate the amount of material (duckweed ( Lemna genus), filamentous algae, and other macrophyte fragments) and associated nutrients (in this case, phosphorus, P) transported on the surface of Silver Creek, Wisconsin, to determine if this material is an important transport mechanism and if historical P loads were underestimated. This approach includes estimating the transport of surface material using 10 s videos collected every 15 min from a downward-looking camera installed beneath a bridge. The average velocity of the surface material was first determined using Large-Scale Particle Image Velocimetry (LSPIV), which uses short videos to analyze surface particle movement. The amount of surface material in each video was then computed using computer-vision techniques. The P load associated with the transported surface material was then estimated by combining surface velocities, coverage of floating material, and laboratory-measured P content. Surface material transported ~9–11% of the total summer P load and ~4–7% of the annual load in Silver Creek.

Wisconsin↗
USGS2026

Light-dependent activity of deepwater sculpin (Myoxocephalus thompsonii) across substrates with and without predation risk

Light availability strongly influences predator–prey interactions in deepwater ecosystems, where visual constraints shape both foraging success and prey behavior. The behavioral response of deepwater sculpin ( Myoxocephalus thompsonii ) to siscowet lake trout ( Salvelinus namaycush siscowet ) was studied under ecologically relevant light intensities spanning several orders of magnitude typical of daytime downwelling light in the 20–100 m depth range of Lake Superior. Trials were conducted over varying substrates (gravel, sand, and black fabric). Deepwater sculpin showed a significant preference for gravel over sand and black fabric. In the absence of siscowet, sculpin movement frequency increased as light intensity decreased. Sculpin reaction distance to siscowet was influenced by both light and substrate. Reaction distance was shortest at low light intensities, peaked at intermediate light intensities (3.05 × 10⁹ to < 6.0 × 10⁹ photons m⁻2 s⁻1), and declined again at the highest light intensities tested. In the presence of siscowet, sculpin activity was suppressed at the upper end of the light range (≥ 6.0 × 10⁹ photons m⁻2 s⁻1). The greatest increase in movement occurred between 6.0 × 10⁹ and 3.05 × 10⁹ photons m⁻2 s⁻1, which corresponded to the range where siscowet prey capture declined, suggesting sculpin exploit this low-light window to move with reduced risk. Reduced activity in the presence of predators is common among cryptic species, and our findings suggest that sculpin restrict movement at higher light levels to avoid detection by siscowet.

Wisconsin↗
USGS2026

Teach me how to pycap: A high-capacity well decision support tool using analytical solutions in Python

Regulatory agencies in humid temperate environments rely on timely evaluations of streamflow depletion and drawdown to protect aquatic ecosystems and existing water users. Numerical models offer detailed insights, but their complexity and time demands often preclude their practical use in rapid decision-making. We present pycap-dss, an open-source Python package that implements a suite of analytical solutions for estimating streamflow depletion and drawdown. The tool supports superposition of multiple wells and time-varying pumping, enabling cumulative impact assessments in situations with multiple wells and streams. The software is modular and extensible, allowing users to interchange solutions or add new analytical methods. A YAML-based configuration supports batch processing of multiple wells, and an optional AnalysisProject class facilitates integration with regulatory workflows. Rigorous unit and regression testing ensures computational reliability, and continuous integration supports ongoing development. We demonstrate deterministic examples of drawdown where multiple solutions are readily compared and streamflow depletion with multiple wells in the Central Sands region of Wisconsin. We also show the value of Monte Carlo analyses of streamflow depletion in the same Central Sands example, leveraging computational efficiency to evaluate the uncertainty of individual and cumulative streamflow depletion calculations from over 200 high-capacity wells.

Wisconsin↗
USGS2025

Detection of viral, bacterial, and protozoan pathogens and microbial source tracking markers in paired large- and small-volume water samples

When sampling for waterborne microbes, researchers may need to diverge from recommended sample volumes due to logistical constraints, novel targets, or challenging matrices, with little guidance about the potential impact on results. In field studies, we measured bacteria, viruses, and protozoa (15 quantitative polymerase chain reaction assays) in paired large- and small-volume samples to evaluate method performance and relevant factors. Concordance between methods was low. Large-volume ultrafiltration yielded more detections than small-volume sampling, especially for pathogens in groundwater. Greater microbial concentrations were associated with more frequent detections in small-volume samples and greater concordance between paired samples. Large-volume samples appeared to be more susceptible to diminished sensitivity from complex sample matrices. In laboratory studies, recovery of microbes was poorer for large- than small-volume methods, although large-volume methods more reliably detected low-concentration targets. Large-volume samples were less stable than small-volume samples during storage. Overall, large-volume sampling was superior for detecting pathogens but may underestimate concentrations; small-volume sampling was more prone to false negatives but was adequate when concentrations were relatively high, like we observed for microbial source tracking in surface waters.

Wisconsin↗
USGS2025

Assessing flood water infiltration and storage in a restored floodplain

In urban areas, floodplain restoration is gaining prominence as a strategy for restoring the natural functions of floodplain ecosystems and reducing flood risk. This has spurred research into potential interactions between floodwaters, the hyporheic zone, and the floodplain aquifer. An urban restored stream in Wisconsin, USA, was used as a case study to examine four methods to estimate floodplain infiltration and storage during overbank floods. We characterised flood-related infiltration over a 4-year period from 2018 through 2021 by simultaneously and continuously measuring groundwater levels and vertical temperature profiles with stream water levels linked to high-resolution flood inundation maps. High-resolution topographic data helped to quantify surface floodplain storage and the unsaturated soil volume relative to flood stage. Infiltration estimates from the simple methods align well with those from the more complex methods; however, the complex methods provide additional insights about the factors influencing infiltration. Results from all methods indicate that the volume of water that vertically infiltrates during floods is likely small relative to the total volume of the flood, with 0.08%–0.52% of flood water infiltrating into the floodplain, on average. Spatially variable vertical hydraulic gradients, driven by flood depth, groundwater level, and permeability, imply heterogeneous patterns of infiltration across the floodplain. Gradients favourable for infiltration typically occurred during the onset of flooding but, over the study period, were mostly (98% of the time) favourable for groundwater discharge to the channel (non-flood periods). These findings highlight the importance of considering surface-groundwater dynamics, floodplain soils, and unsaturated floodplain volume in defining the benefits of floodplain infiltration for flood attenuation.

Wisconsin↗
USGS2025

A regional model comparison between MODPATH and MT3D of groundwater travel time distributions

Groundwater quality changes in wells and streams lag behind changes to land use due to groundwater travel times. Two contaminant transport methods were compared to assess differences in their simulated travel time distributions (TTDs) to streams and wells in the Wisconsin Central Sands. MODPATH simulates advective groundwater flow with particle tracking, while MT3D simulates age-mass using a finite difference solution without dispersion to allow for direct comparison of the two methods. MODPATH appropriately simulates groundwater TTDs from the water table to surface discharge but is subject to inaccuracies at weak-sink well cells due to the flow-model grid discretization and imprecise location of well discharge within well cells. MT3D better represents weak-sink well cells since it removes mass in proportion to the prescribed pumping rate, although travel time within well cells is neglected. Conversely, MT3D's treatment of surface water boundary cells is not as accurate as MODPATH because mass should be removed from the water table rather than the full cell volume. MT3D simulations of TTDs can also be confounded by the instantaneous vertical distribution of mass introduced throughout recharge cells instead of at the water table, which initiates mass along deeper flow paths. We evaluated 9 MODPATH and 13 MT3D implementations, generating differences in median travel times of up to 18 years. Both methods have strengths and weaknesses, with MT3D better representing weak-sink well cell behavior and MODPATH better representing surficial recharge and discharge. The effect of these characteristics on simulated TTDs, along with ideas for ameliorating method weaknesses, is discussed.

Wisconsin↗
USGS2023

Evaluation of models for estimating hydraulic conductivity in glacial aquifers from NMR logging

Nuclear magnetic resonance (NMR) logging is a promising method for estimating hydraulic conductivity ( K ). During the past ∼60 years, NMR logging has been used for petroleum applications, and different models have been developed for deriving estimates of permeability. These models involve calibration parameters whose values were determined through decades of research on sandstones and carbonates. We assessed the use of five models to derive estimates of K in glacial aquifers from NMR logging data acquired in two wells at each of two field sites in central Wisconsin, USA. Measurements of K , obtained with a direct push permeameter (DPP), K DPP , were used to obtain the calibration parameters in the Schlumberger-Doll Research, Seevers, Timur-Coates, Kozeny-Godefroy, and sum-of-echoes (SOE) models so as to predict K from the NMR data; and were also used to assess the ability of the models to predict K DPP . We obtained four well-scale calibration parameter values for each model using the NMR and DPP measurements in each well; and one study-scale parameter value for each model by using all data. The SOE model achieved an agreement with K DPP that matched or exceeded that of the other models. The Timur-Coates estimates of K were found to be substantially different from K DPP . Although the well-scale parameter values for the Schlumberger-Doll, Seevers, and SOE models were found to vary by less than a factor of 2, more research is needed to confirm their general applicability so that site-specific calibration is not required to obtain accurate estimates of K from NMR logging data.

Wisconsin↗