USGS ScienceSearch

Geology topics

Research about Wind River Basin Province

Source-linked reports with geographic coverage including Wind River Basin Province.

9 recordsLinked to original sources

Petroleum systems and geologic assessment of oil and gas in the Wind River Basin Province, Wyoming

The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geologically based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States. The U.S. Geological Survey (USGS) recently completed an assessment of the undiscovered oil and gas potential of the Wind River Basin Province which encompasses about 4.7 million acres in central Wyoming. The assessment is based on the geologic elements of each total petroleum system (TPS) defined in the province, including hydrocarbon source rocks (source-rock maturation, hydrocarbon generation, and migration), reservoir rocks (sequence stratigraphy and petrophysical properties), and hydrocarbon traps (trap formation and timing). Using this geologic framework, the USGS defined three TPSs: (1) Phosphoria TPS, (2) Cretaceous-Tertiary TPS, and (3) Waltman TPS. Within these systems, 12 Assessment Units (AU) were defined and undiscovered oil and gas resources were quantitatively estimated within 10 of the 12 AUs.

Wyoming

Detailed measured sections, cross sections, and paleogeographic reconstructions of the upper cretaceous and lower tertiary nonmarine interval, Wind River Basin, Wyoming: Chapter 10 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

Detailed measured sections and regional stratigraphic cross sections are used to reconstruct facies maps and interpret paleogeographic settings for the interval from the base of Upper Cretaceous Mesaverde Formation to top of lower member of the Paleocene Fort Union Formation in the Wind River Basin, Wyoming. The Mesaverde Formation spans the time during which the Upper Cretaceous seaway retreated eastward out of central Wyoming in Campanian time and the initial stages of the Lewis transgression in earliest Maastrichtian time. This retreat stalled for a considerable period of time during deposition of the lower part of the Mesaverde, creating a thick buildup of marginal marine sandstones and coaly coastal plain deposits across the western part of the basin. The Lewis sea transgressed into the northeast part of Wind River Basin, beginning in early Maastrichtian time during deposition of the Teapot Sandstone Member of the Mesaverde Formation. The Meeteetse Formation, which overlies the Teapot, was deposited in a poorly-drained coastal plain setting southwest of the Lewis seaway. The Lewis seaway, at maximum transgression, covered much of the northeast half of the Wind River Basin area but was clearly deflected around the present site of the Wind River Range, southwest of the basin, providing the first direct evidence of Laramide uplift on that range. Uplift of the Wind River Range continued during deposition of the overlying Maastrichtian Lance Formation. The Granite Mountains south of the basin also became a positive feature during this time. A rapidly subsiding trough during the Maastrichtian time formed near the presentday trough of the Wind River Basin in which more than 6,000 feet of Lance was deposited. The development of this trough appears to have begun before the adjacent Owl Creek Mountains to the north started to rise; however, a muddy facies in the upper part of Lance in the deep subsurface, just to the south, might be interpreted to indicate that the Cretaceous Cody Shale was being eroded off a rising Owl Creek Mountains in latest Cretaceous time. The Paleocene Fort Union Formation unconformably overlies older units but with only slight angular discordance around much of the margins of the Wind River Basin. Pre-Fort Union erosion was most pronounced toward the Wind River Range to the southwest, where the Fort Union ultimately overlies strata as old as the upper part of the Cretaceous Cody Shale. The unconformity appears to die out toward the basin center. Coal-forming mires developed throughout the western part of the basin near the beginning of the Paleocene. River systems entering the basin from the Wind River Range to the southwest and the Granite Mountains to the south produced areas of sandy fluvial deposition along mountain fronts. A major river system appears to have entered the basin from about the same spot along the Wind River Range throughout much of the Paleocene, probably because it became incised and could not migrate laterally. The muddy floodplain facies that developed along the deep basin trough during latest Cretaceous time, expanded during the early part of the Paleocene. Coal-forming mires that characterize part of the lower Fort Union Formation reached maximum extent near the beginning of the late Paleocene and just prior to the initial transgression of Lake Waltman. From the time of initial flooding, Lake Waltman expanded rapidly, drowning the coal-forming mires in the central part of the basin and spreading to near basin margins. Outcrop studies along the south margin of the basin document that once maximum transgression was reached, the lake was rapidly pushed basinward and replaced by fluvial environments.

Wyoming

Outcrop descriptions and fossils from the Upper Cretaceous Frontier Formation, Wind River Basin and adjacent areas, Wyoming: Chapter 11 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

The Wind River Basin of central Wyoming trends west-northwest from near the community of Alcova to near the town of Dubois (fig. 1). On the perimeter of the basin, outcrops of the Frontier Formation were examined and described during the years 1972-1975. Invertebrate fossils were collected from those outcrops during the years 1972-1996, in places with the assistance of other earth scientists (see Acknowledgments). The Frontier Formation in the Wind River Basin, ranging in thickness from 650 to 1,000 ft thick, consists mainly of sandstone, siltstone, shale, and bentonite of early Late Cretaceous age. The Frontier conformably overlies the Mowry Shale and is conformably overlain by the Cody Shale. A basal unit of the Cody, a sequence of marine noncalcareous shale, is named the Sage Breaks Member. The Frontier consists of two or three members, separated by disconformities; in ascending order, the Belle Fourche, Emigrant Gap, and Wall Creek. At several localities, the Emigrant Gap Member is missing. The formation was deposited mainly in marine environments, although nonmarine beds are conspicuous in the western part of the basin. Strata of the Frontier record a succession of marine regressions and transgressions. Molluscan fossils from the marine beds were identified and related to the chronostratigraphic chart shown in figure 2. The absolute ages on the chart were determined and supplied by J.D. Obradovich (Cobban and others, 2006). In this region, the Belle Fourche is of Cenomanian age, the Emigrant Gap is of early middle Turonian age, and the Wall Creek is of late Turonian and early Coniacian ages. The main purpose of this report is to present biostratigraphic information from studies of the Frontier Formation in the Wind River Basin that could be useful for future stratigraphic investigations of the formation throughout Wyoming. Locations of outcrop sections and associated fossil collections are depicted on accompanying maps and aerial photographs. Graphic descriptions of strata in the outcrops and identifications of fossils from nearby localities also are presented. Those fossils named on the graphic sections commonly have the most restricted time-spans. Fossils collected near the outcrops studied are not always named on the enclosed graphic sections because (1) the specimens are less useful for dating the enclosing beds, (2) the specimens are duplicates, or (3) the specimens could not be related to specific strata in the sections. The names, locations, and members of the outcrop sections and the approximate ages of the constituent strata are summarized in table 1. The index maps used to show locations of outcrop sections and fossil collections are from scanned versions of U.S. Geological Survey topographic maps of various scales and were obtained from TerraServer®. The portion of each map used depended on the areal distribution of the localities involved. The named quadrangles used for locality descriptions, however, all refer to 7½-minute, 1:24,000-scale quadrangles (for example, “Alcova”). The aerial photographs also are from TerraServer®; http://www.terraserver.com/.

Wyoming

Burial history, thermal maturity, and oil and gas generation history of petroleum systems in the Wind River Basin Province, central Wyoming: Chapter 6 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

Burial history, thermal maturity, and timing of oil and gas generation were modeled for eight key source rock units at nine well locations throughout the Wind River Basin Province. Petroleum source rocks include the Permian Phosphoria Formation, the Cretaceous Mowry Shale, Cody Shale, and Mesaverde, Meeteetse, and Lance Formations, and the Tertiary (Paleocene) Fort Union Formation, including the Waltman Shale Member. Within the province boundary, the Phosphoria is thin and only locally rich in organic carbon. Phosphoria oil produced from reservoirs in the province is thought to have migrated from the Wyoming and Idaho thrust belt. Locations (wells) selected for burial history reconstructions include three in the deepest parts of the province (Adams OAB-17, Bighorn 1-5, and Coastal Owl Creek); three at intermediate depths (Hells Half Acre, Shell 33X-10, and West Poison Spider); and three at relatively shallow locations (Young Ranch, Amoco Unit 100, and Conoco-Coal Bank). The thermal maturity of source rocks is greatest in the deep northern and central parts of the province and decreases to the south and east toward the basin margins. The results of the modeling indicate that, in the deepest areas, (1) peak petroleum generation from Cretaceous rocks occurred from Late Cretaceous through middle Eocene time, and (2) onset of oil generation from the Waltman Shale Member occurred from late Eocene to early Miocene time. Based on modeling results, gas generation from the cracking of Phosphoria oil reservoired in the Park City Formation reached a peak in the late Paleocene/early Eocene (58 to 55 Ma) only in the deepest parts of the province. The Mowry Shale and Cody Shale (in the eastern half of the basin) contain a mix of Type-II and Type-III kerogens. Oil generation from predominantly Type-II source rocks of these units in the deepest parts of the province reached peak rates during the latest Cretaceous to early Eocene (65 to 55 Ma). Only in these areas of the basin did these units reach peak gas generation from the cracking of oil, which occurred in the early to middle Eocene (55 to 42 Ma). Gas-prone source rocks of the Mowry and Cody Shales (predominantly Type-III kerogen), and the Mesaverde, Meeteetse, Lance, and Fort Union Formations (Type –III kerogen) reached peak gas generation in the latest Cretaceous to late Eocene (67 to 38 Ma) in the deepest parts of the province. Gas generation from the Mesaverde source rocks started at all of the modeled locations but reached peak generation at only the deepest locations and at the Hells Half Acre location in the middle Paleocene to early Eocene (59 to 48 Ma). Also at the deepest locations, peak gas generation occurred from the late Paleocene to the early Eocene (57 to 49 Ma) for the Meeteetse Formation, and during the Eocene for the Lance Formation (55 to 48 Ma) and the Fort Union Formation (44 to 38 Ma). The Waltman Shale Member of the Fort Union Formation contains Type-II kerogen. The base of the Waltman reached a level of thermal maturity to generate oil only at the deep-basin locations (Adams OAB-17 and Bighorn 1-5 locations) in the middle Eocene to early Miocene (36 to 20 Ma).

Wyoming

Distribution of fluids and pressures in the Wind River Basin, Wyoming: Chapter 7 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

To examine the state of hydrocarbons and water in the Wind River Basin of Wyoming, the following data types are compiled and presented at the basin scale: fluid type, pressure, and temperature from drillstem tests; watersalinity and cumulative hydrocarbon production from oil and gas wells; vitrinite reflectance data; and sonic well logs. The spatial distribution of produced fluids shows the nearly ubiquitous presence of mobile water, even in highly productive gas-charged formations. Sonic logs record a basin wide velocity decrease in the Lower Cretaceous Thermopolis Shale through the Upper Cretaceous Cody Shale that is attributed to a combination of paleo-overpressuring and present-day overpressuring. Pressure-elevation plots and mud weights reveal the presence of two large pressure compartments in the Madden area, one above the Waltman Shale Member of the Paleocene Fort Union Formation and the other below it. Temperature data reveal hot and cold spots around structures in the marginal parts of the basin where the Waltman Shale Member of the Fort Union Formation is absent. The highest temperature gradients are in the upper pressure compartment in the Madden area. Vitrinite reflectance data record little change with increasing depth throughout much of the geologic section in shallow parts of the basin and a steady increase of log (R o ) with depth in the deep parts of the basin. The varied distribution of fluids, pressure, and temperature reflect the complex history of subsidence, thrusting, hydrocarbon generation, water migration, and uplift in and marginal to this large, asymmetric intermontane basin.

Wyoming

Source rock potential of upper cretaceous marine shales in the Wind River Basin, Wyoming: Chapter 8 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

Seventy-eight samples collected from marine shales from the Cretaceous Mowry Shale, the lower part of the Frontier Formation, and the lower shaly and upper sandy members of the Cody Shale in the Wind River Basin, Wyoming, were analyzed using Rock-Eval and total organic carbon analysis to determine the source rock potential. Results indicate that the Mowry Shale has a generative potential based on organic richness that is considered to be fair to very good, and hydrogen indices and S 2 /S 3 ratios indicate a capability to generate both oil and gas. Maps of the Mowry indicate that it is most organic rich and oil-prone in the eastern part of the basin. Results of total organic carbon and Rock-Eval analyses for the Frontier Formation indicate that it is composed of mainly type III gas-prone kerogen, with organic richness levels that are generally poor to fair. Results of similar analyses of samples from the lower shaly member of the Cody Shale show a generative potential ranging from fair to excellent, and hydrogen indices and S 2 /S 3 ratios indicate that it is capable of generating both oil and gas. Maps showing the distribution of kerogen types and organic richness for the lower shaly member of the Cody Shale are similar to the Mowry and show that lower shaly member of the Cody is more organic rich and more oil-prone in the eastern part of the basin. Analyses of samples of the upper sandy member of the Cody Shale indicate that it has little or no potential as a source rock. Thermal maturity mapping based on vitrinite reflectance measurements in the coal-bearing post-Cody Upper Cretaceous and Paleocene rocks shows that Upper Cretaceous marine shales in the deeper parts of the Wind River Basin are thermally mature to overmature with respect to hydrocarbon generation.

Wyoming

Subsurface stratigraphic cross sections of cretaceous and lower tertiary rocks in the Wind River Basin, central Wyoming: Chapter 9 in Petroleum systems and geologic assessment of oil and gas resources in the Wind River Basin Province, Wyoming

The stratigraphic cross sections presented in this report were constructed as part of a project conducted by the U.S. Geological Survey to characterize and evaluate the undiscovered oil and gas resources of the Wind River Basin (WRB) in central Wyoming. The primary purpose of the cross sections is to show the stratigraphic framework and facies relations of Cretaceous and lower Tertiary rocks in this large, intermontane structural and sedimentary basin, which formed in the Rocky Mountain foreland during the Laramide orogeny (Late Cretaceous through early Eocene time). The WRB is nearly 200 miles (mi) long, 70 mi wide, and encompasses about 7,400 square miles (mi 2 ) (fig. 1). The basin is structurally bounded by the Owl Creek and Bighorn Mountains on the north, the Casper arch on the east, the Granite Mountains on the south, and the Wind River Range on the west.

Wyoming