Geology topics

Research about Washington

Source-linked reports with geographic coverage including Washington.

At least 721 records · Page 40Linked to original sources

USGS2012

Post 12 m.y. rotation of southwest Washington

Paleomagnetic field directions from the basalt of Pack Sack Lookout are compared to those from the Pomona Member of the Saddle Mountains Basalt of the Columbia River Basalt Group. The Pomona crops out over a wide region on the Columbia Plateau east of the Cascade Range, and the basalt of Pack Sack Lookout crops out well to the west of the Cascades about 30 to 60 km east of the Washington coast. Our paleomagnetic results support existing geologic and geochemical evidence that both these units are part of a single 12‐m.y.‐old flow that erupted in western Idaho and flowed to the Washington coast. The magnetic data further indicate that southwest Washington has undergone clockwise rotation with respect to the Columbia Plateau and stable North America. The data suggest that both a large‐scale regional rotation of ∼16° and locally complex small‐scale rotations exist, the two being present to different degrees in the eastern and western regions of southwest Washington. The Cascade Range appears to coincide with the tectonic boundary, separating rotated and unrotated regions of Washington state. Rotation of southwest Washington appears to have been associated with the rotation of large pieces of western Oregon and southern Washington, possibly as a result of either a ridge‐push force from the Basin and Range province or shear along the Pacific‐North America plate boundary.

Washington↗

USGS2012

Paleomagnetism and geology of Eocene volcanic rocks of southwest Washington, implications for mechanisms of tectonic rotation

Paleomagnetic and geologic investigations in Eocene volcanic rocks of the southwest Washington Coast Range demonstrate a close relationship between tectonic rotations and the local structural geology. The allochthonous middle Eocene submarine basalt basement of the Crescent Formation consists of several fault‐bounded structural domains up to 30 km across that are characterized by different amounts of clockwise rotation (20° to perhaps as much as 65°) when compared to the Eocene reference pole for North America. Structural analysis shows the differential rotations postdate middle Eocene folding of the Crescent Formation against the continental margin and predate the unconformably overlying upper Eocene Goble Volcanics, which are rotated about 23° and do not show the same domains of rotation as the underlying Crescent Formation. Post‐Goble rotations may be accommodated by a fault pattern very similar to that expected for areas caught in a simple dextral shear couple along transcurrent faults. Major north‐northwest trending faults with several kilometers of dextral displacement form the boundaries of cross‐faulted shear domains in which the clockwise rotation of elongate crustal slices is accommodated by west‐northwest trending sinistral R ′ Riedel shears. Thirty‐five to 100% of the observed post‐late Eocene rotations could have occurred by this shear rotation mechanism. Other paleomagnetic study areas in the Coast Range and western Cascades have a similar fault geometry and may also have undergone significant shear rotations. Long‐term northward oblique subduction of the Farallon plate beneath the Coast Range throughout most of the Tertiary could have been the driving force for the shear rotations and could explain the rapid eastward decrease in rotation away from the continental margin. Shear rotations could eliminate many of the structural and stratigraphic difficulties associated with models involving rotation of large, rigid plates.

Washington↗

USGS2012

Evidence for a shallow pluton beneath the Goat Rocks Wilderness, Washington, from gravity and magnetic data

A gravity and aeromagnetic study was conducted in and adjacent to the Goat Rocks Wilderness area, Washington. This work was done in conjunction with geologic and geochemical studies which were critically important to our interpretation. The Bouguer gravity anomaly map displays a large central positive gravity anomaly and three superimposed smaller positive anomalies. The main anomaly, about 26 by 11 km with an amplitude of about 16 mGal seems to delineate a dense large pluton or sheeted dike complex intruding less dense, older volcanic and sedimentary rocks lying directly below the volcano. The pluton or sheeted dike complex may have fed the Goat Rocks volcano throughout its 1–2 m.y. history. Three small feeders, mapped on the surface as andesite intrusions, may be the cause of three smaller gravity anomalies superimposed on the main anomaly. The magnetic anomaly maps also exhibit a large central anomaly whose source is the Goat Rocks pluton. The magnetic data suggest that the three shallow intrusive cupolas have undergone a significant amount of hydrothermal alteration. In addition, to some extent the magnetic data reflect the terrain of the area. Topographic highs produce magnetic highs, and topographic lows produce magnetic lows. The deviations from this pattern delineate subsurface geology. Magnetic lows may be of particular interest in locating zones of mineralization where magnetic minerals have been altered and have become significantly less magnetic.

Washington↗

USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗

USGS2012

Tectonics and conductivity structures in the Southern Washington Cascades

The tectonic setting of the southern Washington Cascades has been studied with the aid of magnetotelluric (MT) and other geophysical data. The main feature of interest in the geophysical data is a broad high-conductivity anomaly mapped with MT and geomagnetic variation (GMV) data. This anomaly is located roughly within the triangle formed by the volcanoes Mount Rainier, Mount St. Helens, and Mount Adams but exceeds beyond Mount Rainier to the northwest. We interpret the cause of the anomaly to be conductive rocks with resistivities of 1–4 ohm m and thicknesses possibly greater than 15 km. These conductive rocks are found 2–8 km beneath the overlying less conductive volcanic and sedimentary rocks at the surface. Two aeromagnetic lows follow the trend of the conductivity anomaly, and linear belts of strike-slip seismicity are coincident with both these magnetic lows. One of the aeromagnetic lows is coincident with the western margin of the conductivity anomaly. The geophysical data appear to outline a suture zone of probable Eocene age caused by accretion of a large seamount complex (Siletzia) and that may contain large thicknesses of compressed forearc basin and accretionary prism sedimentary rocks of Cretaceous to Eocene age. Part of the shallower conductive rocks may be associated with carbonaceous continental and transitional marine sedimentary rocks of the Puget Group. The contact between the hypothesized compressed basin and the accreted terranes to the west may localize the release of shear stresses in this region of oblique subduction. Several possible explanations for the conductivity anomaly are considered in addition to the compressed basin hypothesis.

Washington↗

USGS2012

An aeromagnetic study of Mount St. Helens

Aeromagnetic data from surveys flown by the U.S. Geological Survey over Mount St. Helens, Washington, before and after the climactic May 18, 1980, eruption were used to determine the bulk magnetic properties of the volcano and to delineate a buried source. We assumed that most of the edifice of preeruption and posteruption Mount St. Helens has a magnetization direction near the present earth's field of 69° inclination and 20° declination and calculated its intensity as 4.1 A/m. After subtraction of magnetic anomalies due to topogaphy magnetized with this direction and intensity, the preeruption and posteruption surveys revealed nearly identical residual magnetic highs and lows, indicative that their sources were not altered or removed by the May 1980 eruption. The residual highs were explained by a 200-m-deep source lying mostly within the edifice of Mount St. Helens. The source could be terrain that predates Mount St. Helens, such as a buried ridge or a cone or a valley filled with lava. We calculated the magnetization of the material removed by the May 1980 eruption and found its intensity to be 4.2 A/m in a direction near the present earth's field, similar to that assumed for the volcano as a whole. This similar result confirmed the validity of the magnetization vector assumed for the entire edifice.

Washington↗

USGS2012

Evidence from gravity data for an intrusive complex beneath Mount St. Helens

On the basis of gravity data, aided by aeromagnetic, magnetotelluric, side-looking radar, and geologic information, we tentatively identify a large, shallow intrusive complex beneath Mount St. Helens. The complex is roughly 5–6 km thick and has apparently intruded a buried and compressed Mesozoic forearc sedimentary sequence. The lateral extent of the intrusive complex is uncertain, and we give three alternative models varying from about 18 by 10 km to as much as 18 by 22 km. The western boundary of the inferred Mount St. Helens intrusion abuts several of a number of Tertiary and younger plutons that crop out in the area. The Mount St. Helens intrusion apparently is adjacent to sedimentary rock or shallow volcanic rock along most of the remainder of its boundary. A ringlike drainage pattern around Mount St. Helens suggests subsidence caused by removing magma from deep beneath Mount St. Helens and adding this mass to the Mount St. Helens edifice and its underlying intrusion. Our analysis indicates that the average bulk density of the volcanic rock comprising Mount St. Helens is about 2.15 g/cm 3 .

Washington↗

USGS2012

Geophysical constraints on Washington convergent margin structure

Gravity and magnetic maps of western Washington reveal the lateral structure and fabric of the Washington Coast Range, Puget Basin, and southern Washington Cascade Range. The magnetic and gravity maps show large amplitude positive anomalies associated with the shallow but largely buried section of Washington Coast Range mafic rocks which are separated by negative anomalies over deep sedimentary basins. The positive anomalies indicate that the Coast Range mafic basement extends farther east than previously thought, at least as far east as the longitude of Seattle. Linear and steep gravity and magnetic gradients indicate many unmapped, often buried faults in the Washington Coast Range Province. Magnetic highs are also associated with mapped batholiths in the Cascade arc. Several magnetic highs observed east of the Coast Range rocks and west of these batholiths may be associated with buried Tertiary plutons or ophiolites. Two-dimensional gravity and magnetic modeling constrained with geological and other geophysical data indicate that the Coast Range Province rocks are about 1 km thick at the coast, thickening to as much as 30 km near their postulated eastern edge. A maximum boundary on the average density of the upper 15–20 km of the rocks that compose the Coast Range Province of 2920 kg/m 3 was established by the modeling, suggesting a composition largely of basalt and gabbro with little interbedded sediments. Under these rocks may be mantle or a subduction complex composed of dense mafic, ultramafic, and sedimentary rocks like that proposed to underlie Vancouver Island. Previous gravity models of the Washington margin include lower densities for the proposed subduction complex than for Vancouver Island, suggesting a lower component of mafic and ultramafic rocks than the rocks underlying Vancouver Island. However, my Washington model requires that the proposed subduction complex be more dense than the trench sediments and, therefore, that material denser than sediments be incorporated within it. The absence of continental mantle and the modeled wedge shape of the Coast Range Province upper crust suggest that erosion of the bottom of the overriding plate by subduction processes may have occurred.

Washington↗

USGS2012

Tectonic setting of the Wooded Island earthquake swarm, eastern Washington

Magnetic anomalies provide insights into the tectonic implications of a swarm of ~1500 shallow (~1 km deep) earthquakes that occurred in 2009 on the Hanford site,Washington. Epicenters were concentrated in a 2 km2 area nearWooded Island in the Columbia River. The largest earthquake (M 3.0) had first motions consistent with slip on a northwest-striking reverse fault. The swarm was accompanied by 35 mm of vertical surface deformation, seen in satellite interferometry (InSAR), interpreted to be caused by ~50 mm of slip on a northwest-striking reverse fault and associated bedding-plane fault in the underlying Columbia River Basalt Group (CRBG). A magnetic anomaly over exposed CRBG at Yakima Ridge 40 km northwest of Wooded Island extends southeastward beyond the ridge to the Columbia River, suggesting that the Yakima Ridge anticline and its associated thrust fault extend southeastward in the subsurface. In map view, the concealed anticline passes through the earthquake swarm and lies parallel to reverse faults determined from first motions and InSAR data. A forward model of the magnetic anomaly near Wooded Island is consistent with uplift of concealed CRBG, with the top surface <200 m below the surface. The earthquake swarm and the thrust and bedding-plane faults modeled from interferometry all fall within the northeastern limb of the faulted anticline. Although fluids may be responsible for triggering the Wooded Island earthquake swarm, the seismic and aseismic deformation are consistent with regional-scale tectonic compression across the concealed Yakima Ridge anticline.

Washington↗

USGS2012

Monitoring groundwater-surface water interaction using time-series and time-frequency analysis of transient three-dimensional electrical resistivity changes

Time-lapse resistivity imaging is increasingly used to monitor hydrologic processes. Compared to conventional hydrologic measurements, surface time-lapse resistivity provides superior spatial coverage in two or three dimensions, potentially high-resolution information in time, and information in the absence of wells. However, interpretation of time-lapse electrical tomograms is complicated by the ever-increasing size and complexity of long-term, three-dimensional (3-D) time series conductivity data sets. Here we use 3-D surface time-lapse electrical imaging to monitor subsurface electrical conductivity variations associated with stage-driven groundwater-surface water interactions along a stretch of the Columbia River adjacent to the Hanford 300 near Richland, Washington, USA. We reduce the resulting 3-D conductivity time series using both time-series and time-frequency analyses to isolate a paleochannel causing enhanced groundwater-surface water interactions. Correlation analysis on the time-lapse imaging results concisely represents enhanced groundwater-surface water interactions within the paleochannel, and provides information concerning groundwater flow velocities. Time-frequency analysis using the Stockwell (S) transform provides additional information by identifying the stage periodicities driving groundwater-surface water interactions due to upstream dam operations, and identifying segments in time-frequency space when these interactions are most active. These results provide new insight into the distribution and timing of river water intrusion into the Hanford 300 Area, which has a governing influence on the behavior of a uranium plume left over from historical nuclear fuel processing operations.

Washington↗

USGS2012

Aquatic insect assemblages associated with subalpine stream segment types in relict glaciated headwaters

1. Aquatic habitats and biotic assemblages in subalpine headwaters are sensitive to climate and human impacts. Understanding biotic responses to such perturbations and the contribution of high-elevation headwaters to riverine biodiversity requires the assessment of assemblage composition among habitat types. We compared aquatic insect assemblages among headwater stream segment types in relict glaciated subalpine basins in Mt. Rainier National Park, Washington, USA. 2. Aquatic insects were collected during summer and autumn in three headwater basins. In each basin, three different stream segment types were sampled: colluvial groundwater sources, alluvial lake inlets, and cascade-bedrock lake outlets. Ward's hierarchical cluster analysis revealed high β diversity in aquatic insect assemblages, and non-metric multidimensional scaling indicated that spatial and temporal patterns in assemblage composition differed among headwater stream segment types. Aquatic insect assemblages showed more fidelity to stream segment types than to individual basins, and the principal environmental variables associated with assemblage structure were temperature and substrate. 3. Indicator species analyses identified specific aquatic insects associated with each stream segment type. Several rare and potentially endemic aquatic insect taxa were present, including the recently described species, Lednia borealis (Baumann and Kondratieff). 4. Our results indicate that aquatic insect assemblages in relict glaciated subalpine headwaters were strongly differentiated among stream segment types. These results illustrate the contribution of headwaters to riverine biodiversity and emphasise the importance of these habitats for monitoring biotic responses to climate change. Monitoring biotic assemblages in high-elevation headwaters is needed to prevent the potential loss of unique and sensitive biota.

Washington↗

USGS2012

Tradeoffs between homing and habitat quality for spawning site selection by hatchery-origin Chinook salmon

Spawning site selection by female salmon is based on complex and poorly understood tradeoffs between the homing instinct and the availability of appropriate habitat for successful reproduction. Previous studies have shown that hatchery-origin Chinook salmon ( Oncorhynchus tshawytscha ) released from different acclimation sites return with varying degrees of fidelity to these areas. To investigate the possibility that homing fidelity is associated with aquatic habitat conditions, we quantified physical habitat throughout 165 km in the upper Yakima River basin (Washington, USA) and mapped redd and carcass locations from 2004 to 2008. Principal components analysis identified differences in substrate, cover, stream width, and gradient among reaches surrounding acclimation sites, and canonical correspondence analysis revealed that these differences in habitat characteristics were associated with spatial patterns of spawning ( p < 0.01). These analyses indicated that female salmon may forego spawning near their acclimation area if the surrounding habitat is unsuitable. Evaluating the spatial context of acclimation areas in relation to surrounding habitat may provide essential information for effectively managing supplementation programs and prioritizing restoration actions.

Washington↗

USGS2012

Sediment transport on a high-energy ebb-tidal delta

Six tripods were deployed at shallow (~14-m) and deep (~24-m) sites on the northern, middle, and southern flanks of the Grays Harbor, Washington, U.S.A. ebb-tidal delta from early October through December, 1999 to measure waves, currents, temperature, and suspended-sediment concentrations as part of a wave-refraction and sediment-transport experiment. Directional wave spectra show that the general direction of wave approach shifted from WNW to WSW as the North Pacific weather pattern shifted from summer to winter, and we were fortunate enough to capture a large storm (offshore significant wave heights of ~8 m) in late October and a sequence of about 8 smaller events with ~4 to 6-m waves in November and December. As expected, wave directions indicated refraction around the ebb-tidal delta, and varied with incident wave period and direction. Direct estimates of sediment flux about 0.4–0.6 m above the bottom, and modeled estimates of depth-integrated suspended sediment flux indicate net offshore and northward transport. By comparison, estimated net bedload flux was onshore, but at much lower rates. These results indicate that sand on the ebb-tidal delta can be mobilized frequently under winter conditions, and can bypass the inlet at depths of at least 24 m. The data also suggest that significant offshore transport occurs at these depths and that offshore suspended-sediment transport during winter is so great that it might not be balanced by onshore bedload transport.

Washington↗

USGS2012

Holocene faulting in the Bellingham forearc basin: Upper-plate deformation at the northern end of the Cascadia subduction zone

The northern Cascadia forearc takes up most of the strain transmitted northward via the Oregon Coast block from the northward-migrating Sierra Nevada block. The north-south contractional strain in the forearc manifests in upper-plate faults active during the Holocene, the northern-most components of which are faults within the Bellingham Basin. The Bellingham Basin is the northern of four basins of the actively deforming northern Cascadia forearc. A set of Holocene faults, Drayton Harbor, Birch Bay, and Sandy Point faults, occur within the Bellingham Basin and can be traced from onshore to offshore using a combination of aeromagnetic lineaments, paleoseismic investigations and scarps identified using LiDAR imagery. With the recognition of such Holocene faults, the northernmost margin of the actively deforming Cascadia forearc extends 60 km north of the previously recognized limit of Holocene forearc deformation. Although to date no Holocene faults are recognized at the northern boundary of the Bellingham Basin, which is 15 km north of the international border, there is no compelling tectonic reason to expect that Holocene faults are limited to south of the international border.

Washington↗

USGS2012

Spatially variable stage-driven groundwater-surface water interaction inferred from time-frequency analysis of distributed temperature sensing data

Characterization of groundwater-surface water exchange is essential for improving understanding of contaminant transport between aquifers and rivers. Fiber-optic distributed temperature sensing (FODTS) provides rich spatiotemporal datasets for quantitative and qualitative analysis of groundwater-surface water exchange. We demonstrate how time-frequency analysis of FODTS and synchronous river stage time series from the Columbia River adjacent to the Hanford 300-Area, Richland, Washington, provides spatial information on the strength of stage-driven exchange of uranium contaminated groundwater in response to subsurface heterogeneity. Although used in previous studies, the stage-temperature correlation coefficient proved an unreliable indicator of the stage-driven forcing on groundwater discharge in the presence of other factors influencing river water temperature. In contrast, S-transform analysis of the stage and FODTS data definitively identifies the spatial distribution of discharge zones and provided information on the dominant forcing periods (≥2 d) of the complex dam operations driving stage fluctuations and hence groundwater-surface water exchange at the 300-Area.

Washington↗

USGS2012

Toxicity of sediment pore water in Puget Sound (Washington, USA): a review of spatial status and temporal trends

Data from toxicity tests of the pore water extracted from Puget Sound sediments were compiled from surveys conducted from 1997 to 2009. Tests were performed on 664 samples collected throughout all of the eight monitoring regions in the Sound, an area encompassing 2,294.1 km 2 . Tests were performed with the gametes of the Pacific purple sea urchin, Strongylocentrotus purpuratus, to measure percent fertilization success as an indicator of relative sediment quality. Data were evaluated to determine the incidence, degree of response, geographic patterns, spatial extent, and temporal changes in toxicity. This is the first survey of this kind and magnitude in Puget Sound. In the initial round of surveys of the eight regions, 40 of 381 samples were toxic for an incidence of 10.5 %. Stations classified as toxic represented an estimated total of 107.1 km 2 , equivalent to 4.7 % of the total area. Percent sea urchin fertilization ranged from >100 % of the nontoxic, negative controls to 0 %. Toxicity was most prevalent and pervasive in the industrialized harbors and lowest in the deep basins. Conditions were intermediate in deep-water passages, urban bays, and rural bays. A second round of testing in four regions and three selected urban bays was completed 5–10 years following the first round. The incidence and spatial extent of toxicity decreased in two of the regions and two of the bays and increased in the other two regions and the third bay; however, only the latter change was statistically significant. Both the incidence and spatial extent of toxicity were lower in the Sound than in most other US estuaries and marine bays.

Washington↗

USGS2012

Contemporary seismicity in and around the Yakima-Fold-and-Thrust Belt in eastern Washington

We examined characteristics of routinely cataloged seismicity from 1970 to the present in and around the Yakima fold‐and‐thrust belt (YFTB) in eastern Washington to determine if the characteristics of contemporary seismicity provide clues about regional‐scale active tectonics or about more localized, near‐surface processes. We employed new structural and hydrologic models of the Columbia River basalts (CRB) and found that one‐third to one‐half of the cataloged earthquakes occur within the CRB and that these CRB earthquakes exhibit significantly more clustered, and swarmlike, behavior than those outside. These results and inferences from published studies led us to hypothesize that clustered seismicity is likely associated with hydrologic changes in the CRB, which hosts the regional aquifer system. While some general features of the regional groundwater system support this hypothesis, seismicity patterns and mapped long‐term changes in groundwater levels and present‐day irrigation neither support nor refute it. Regional tectonic processes and crustal‐scale structures likely influence the distribution of earthquakes both outside and within the CRB as well. We based this inference on qualitatively assessed alignments between the dominant northwest trends in the geologic structure and the seismicity generally and between specific faults and characteristics of the 2009 Wooded Island swarm and aseismic slip, which is the only cluster studied in detail and the most vigorous since regional monitoring began.

Washington↗

USGS2012

Geomorphic response to flow regulation and channel and floodplain alteration in the gravel-bedded Cedar River, Washington, USA

Decadal- to annual-scale analyses of changes to the fluvial form and processes of the Cedar River in Washington State, USA, reveal the effects of flow regulation, bank stabilization, and log-jam removal on a gravel-bedded river in a temperate climate. During the twentieth century, revetments were built along ~ 60% of the lower Cedar River's length and the 2-year return period flow decreased by 47% following flow regulation beginning in 1914. The formerly wide, anastomosing channel narrowed by over 50% from an average of 47 m in 1936 to 23 m in 1989 and became progressively single threaded. Subsequent high flows and localized revetment removal contributed to an increase in mean channel width to about 34 m by 2011. Channel migration rates between 1936 and 2011 were up to 8 m/year in reaches not confined by revetments or valley walls and less than analysis uncertainty throughout most of the Cedar River's length where bank armoring restricted channel movement. In unconfined reaches where large wood and sediment can be recruited, contemporary high flows, though smaller in magnitude than preregulation high flows, form and maintain geomorphic features such as pools, gravel bars, and side channels. Reaches confined by revetments remain mostly unmodified in the regulated flow regime. While high flows are important for maintaining channel dynamics in the Cedar River, their effectiveness is currently reduced by revetments, limited sediment supply, the lack of large wood available for recruitment to the channel, and decreased magnitude since flow regulation.

Washington↗