Vegetation classification and mapping Vicksburg National Military Park, Mississippi
No abstract available.
Mississippi↗
Geology topics
Research about Vicksburg National Military Park
Source-linked reports with geographic coverage including Vicksburg National Military Park.
Vegetation classification and mapping, Vicksburg National Military Park, Mississippi
Executive Summary The National Park Service (NPS) Gulf Coast Inventory and Monitoring Network, with the support of the National Park Service Vegetation Inventory completed vegetation classification and mapping for Vicksburg National Military Park (VICK), in Warren County, Mississippi, from 2004 to 2010. VICK is one of more than 250 NPS units to be covered by the Vegetation Inventory. Methods and procedures follow those of the NPS Vegetation Inventory as of August, 2012 ( http://science.nature.nps.gov/im/inventory/veg/index.cfm ). Ecologists collected floristic and environmental data from 45 vegetation field plots and classified and described 13 plant community types corresponding to US National Vegetation Classification (USNVC) associations from these data. This classification was used to map 712 hectares (1,698 acres) of Vicksburg National Military Park, in ten map classes corresponding to vegetation associations and two non-vegetated land cover classes, from a digital orthomosaic created from 1:24,000 color infrared aerial photographs and digital elevation model (DEM) data. Methods used to delineate stands varied according to vegetation type and were a combination of incorporating stand boundaries from an existing map, new “heads-up” interpretation and modeling of digital environmental spatial data. A thematic accuracy assessment collected vegetation data from 118 field observations stratified across the vegetation classes. The overall accuracy of the vegetation map was estimated to be 60.5% at the thematic level of USNVC association and 92.4% at the thematic level of USNVC group. Estimates of areas of vegetation types, as adjusted for mapping error, were calculated for all types mapped and/or observed during the thematic accuracy assessment. An important finding of this study is that the composition of the forests of VICK is substantially different from that described by earlier, more qualitative, accounts. Implications of these findings and possible applications of the data for resource monitoring and management are presented. This report summarizes the methods and general results of the Vegetation Inventory for Vicksburg National Military Park. Appendices include descriptions of vegetation types, a field key to the types, a list of plant species, and accuracy assessment contingency tables. This report is supplemented by the project data, which include: spatial database containing map polygon attributes. Geospatial products are in Universal Transverse Mercator (UTM) projection, Zone 15, using the North American Datum of 1983. all field data (plot, observation point, and accuracy assessment point) stored in a Microsoft Access database metadata for all digital products The data and reports produced by this investigation reside at: https://irma.nps.gov/App/ and/or at: http://biology.usgs.gov/npsveg/
Mississippi↗
EAARL topography - Vicksburg National Military Park 2008: Bare earth
These remotely sensed, geographically referenced elevation measurements of Lidar-derived bare earth (BE) topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), Gulf Coast Network, Lafayette, LA; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of the Vicksburg National Military Park in Mississippi, acquired on March 6, 2008. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.
Mississippi↗