USGS Science⌕ Search

Geology topics

Research about Oregon, Washington

Source-linked reports with geographic coverage including Oregon, Washington.

At least 289 records · Page 16Linked to original sources
USGS1980

Storm runoff as related to urbanization in the Portland, Oregon-Vancouver, Washington Area

A series of equations was developed to provide a better method of determining flood frequencies in the Portland-Vancouver urban area than is now available. The resulting regression equations can be used to compute peak discharge and storm runoff with a standard error of estimate of approximately 30 percent. Basins used to define the regression equations ranged in size from 0.2 to 26 square miles. Those physical basin parameters that proved to be significant are: drainage area, effective impervious area, storage, rainfall intensity, basin slope, and soil infiltration. The equations indicate that total urbanization of an undeveloped basin can increase peak discharge as much as 3? times and almost double the volume of storm runoff. Impervious area, as delineated by mapping techniques, proved to be an inadequate physical parameter for use in the regression equations because builders and planners have devised many methods of routing storm runoff from impervious areas to the main channel (in effect, speeding up or slowing down the response to the storm). In some parts of the study area, storm runoff was diverted into dry wells and never entered the main channel. To define the effect of this rerouting, the digital model was used to find an effective impervious area that would 'best fit' the rainfall-runoff data. Field estimates to verify the effectiveness of the impervious area for two of the basins showed that optimizations were within 20 percent of those shown by the digital model. Users of these data who may find the effective impervious area a difficult, expensive, and time-consuming parameter to obtain have an alternative. The combination of land-use type I (parks, forests, and vacant lots) and Type II (agriculture) proved to be an excellent inverse indicator of impervious area. Land-use types I and II, coupled with the street-gutter density, an indication of effective routing, provide the user with alternative indices of urbanization.

Oregon, Washington↗
USGS1980

Lateral trends and vertical sequences in estuarine sediments, Willapa Bay, Washington

Willapa Bay is a sizable estuary on the southern coast of Washington- Relatively unmodified in a geologic sense by human activity the bay provides an excellent example of modern depositional facies in an estuarine setting. Studies of these deposits indicate that consistent lateral trends exist in sediment texture and sedimentary structures. The texture changes from sandy at the mouth of the bay to muddy in its upper parts. In any part of the bay , sediment is coarsest in the channel bottoms, where lag deposits accumulate. The sediment tends to fine in an upslope direction and is finest in supratidal flat deposits of silt and clay. The nature of sedimentary structures depends on the combination of physical and biological processes and sediment textures. Bedforms exist wherever the bed is sandy. In the main tidal channels sandwaves and dunes up to 4 meters high occur. In tributary channels and at the margins of the main channel, at shallower depths and under less intense currents , the structures are generally less than a meter high. Current ripples occur in t he sandy bed of all of the tidal channels and in runoff channels cross the tidal flat. Symmetric long-crested ripples are produced by wave action over the sandy intertidal flat. Internal structures in the bay's sediment depend not only on the nature of the bedform but also on the rate of bioturbation relative to physical processes. Under fields of large sandwaves or dunes, medium- to large-scale tabular and trough crossbedding predominates. This crossbedding generally is unidirectional, reflecting the locally dominant current (ebb or flood). Ripple bedding predominates elsewhere in sandy sediment within the channels. Where sand transport is diminished, as on the floor of the upper tributary channels, bioturbation exceeds the rate of production of physical structures and bedding is destroyed. The depositional banks in such areas tend to be sites of rapid sediment accumulation and bedding in the form of interlayered sand (commonly ripple bedded) and mud persists. On intertidal flats the sediment accumulates slowly and bioturbation erases nearly all physical structures. Bedding is preserved only where deposition is locally rapid , as in topographic depressions or on the depositional banks of runoff channels, or where faunal activity is inhibited, as beneath mounds of blue-green algae. The rate of sedimentation is slower still on the supratidal flats, but the general paucity of faunal activity allows the preservation of thin alternations of fine sand , silt or clay. The lateral migration of the tidal channels produces vertical sequences in which topographically higher facies are superposed on one another. Near the mouth of the estuary the upward sequence: lag deposit — crossbedded sand — ripple or planar-bedded sand is typical. The crossbedding shows a general upward decrease in thickness and a progression from trough to tabular units. In the main tidal channel - in the central estuary and in sandy tributary channels, the typical vertical sequence resembles that near the mouth , with the exception that the sequence is capped by bioturbated sandy or muddy tide flat deposits. In the upper estuary , where muddy sediment predominates, a typical sequence shows the progression-. bioturbated lag deposit — gently dipping interlaminated sand and mud layers of the accretionary bank — bioturbated mud flat deposits — thinly laminated fine supratidal deposits.

Oregon, Washington↗
USGS1979

Organochlorine and mercury residues in Swainson's hawk eggs from the Pacific Northwest

Many raptorial species in the Pacific Northwest have not been studied from the viewpoint of pollutant contamination. The Swainson's Hawk ( Buteo swainsoni ) is particularly interesting because of its highly migratory characteristic; it apparently winters primarily in Argentina (Brown and Amadon 1968, Houston 1968). White and Cade (1977) and others have suggested Central America and South America as possible sources of pesticide contamination for wintering raptors from North America. The spraying of DDT in the Northwest in 1974 provided the opportunity to study several forest-dwelling raptors (Henny 1977); and in 1976, we made a special effort to collect a series of eggs of Swainson's Hawks from northeastern Oregon (some adjacent to the area sprayed with DDT in 1974) and southeastern Washington. This study was undertaken to determine organochlorine pesticide and other pollutant burdens in the Swainson's Hawk.

Oregon, Washington↗
USGS1978

Low-cost computer classification of land cover in the Portland area, Oregon, by signature extension techniques

Computer-aided techniques for interpreting multispectral data acquired by Landsat offer economies in the mapping of land cover. Even so, the actual establishment of the statistical classes, or "signatures," is one of the relatively more costly operations involved. Analysts have therefore been seeking cost-saving signature extension techniques that would accept training data acquired for one time or place and apply them to another. Opportunities to extend signatures occur in preprocessing steps and in the classification steps that follow. In the present example, land cover classes were derived by the simplest and most direct form of signature extension: Classes statistically derived from a Landsat scene for the Puget Sound area, Wash., were applied to the Portland area, Oreg., using data for the next Landsat scene acquired less than 25 seconds down orbit. Many features can be recognized on the reduced-scale version of the Portland land cover map shown in this report, although no statistical assessment of its accuracy is available. The cost of classifying 5,607 square kilometers (2,165 sq. mi.) in the Portland area was less than 8 cents per square kilometer ($0.0788, or $0.2041 per square mile). Besides saving in costs, this and other signature extension techniques may be useful in completing land use and land cover mapping in other large areas where multispectral and multitemporal Landsat data are available in digital form but other source materials are generally lacking.

Oregon, Washington↗
USGS1978

Rainfall-runoff data for selected basins, Portland, Oregon, and Vancouver, Washington, 1973-77

In the Portland-Vancouver area, storms and floods are presently being studied in 16 basins with drainage areas ranging from 0.21 to 6.63 square miles and with various basin slopes, degrees of imperviousness, and mixes of land use. Fanno Creek basin in Portland has the longest period of rainfall-runoff record, starting in 1973; Tryon Creek basin in Portland is next with a record starting in 1974. Records in all other basins began in 1975. For each basin, data are tabulated for daily precipitation on a yearly basis and for 5-minute precipitation and 5-minute streamflow for selected storms.

Oregon, Washington↗
USGS1978

Low-cost computer classification of land cover in the Portland area, Oregon, by signature extension techniques

Computer-aided techniques for interpreting multispectral data acquired by Landsat offer economies in the mapping of land cover. Even so, the actual establishment of the statistical classes, or "signatures," is one of the relatively more costly operations involved. Analysts have, therefore, been seeking cost-saving signature extension techniques that would accept training data acquired at one time or place and apply them to another. Signatures may be extended in preprocessing steps or in the classification steps that follow. In the present example, land cover classes were derived by the simplest and most direct form of signature extension: Classes statistically derived from a Landsat scene of the Puget Sound area, Wash., were applied to the adjacent Landsat scene of the Portland area, Oreg., acquired during the next 25 seconds down orbit. Many features can be recognized on the reduced-scale version of the Portland land cover map shown in this report although no statistical assessment of its accuracy is available.

Oregon, Washington↗
USGS1976

Late Pleistocene and Holocene depositional trends, processes, and history of Astoria deep-sea fan, Northeast Pacific

The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas. These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas. In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years). During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene. By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times.

Oregon, Washington↗
USGS1976

Geologic interpretation of an aeromagnetic map of the west-central Columbia Plateau, Washington and Oregon

A low altitude, total intensity aeromagnetic map of the ?west-central Columbia Plateau, underlain principally by the Yakima Basalt,. shows Positive and negative anomalies that stand out from a moderate intensity .background reflecting .interbedded flows of normal and reversed magnetic polarity. One set of anomalies is related to anticlinal ridges, nother follows the traces of known or inferred faults, and a third set coincides with a swarm of feeder dikes for the Ice Harbor flows of Swanson and others (1975b), the youngest unit of basalt in the area. A fourth set of narrow, sinuous anomalies is related to flows that filled ancient valleys during the late stage of Yakima volcanism. The magnetic map suggests that the Ice Harbor dike swarm is offset by left-lateral strike-slip displacement along the Rattlesnake-Wallula fault, a segment of the Olympic-Wallowa lineament. The aeromagnetic map is of great help in delineating the extent of the dike swarm, mapping the ancient drainage system, and understanding the structural history of this part of the Columbia Plateau.

Oregon, Washington↗
USGS1973

Chemical variation related to the stratigraphy of the Columbia River basalt

Study of major element chemical analyses of Columbia River basalt leads to a grouping of most of the analyses into 11 chemical types which are distinguished with little overlap on a SiO 2 -MgO variation diagram. Other diagnostic variation diagrams are total iron (‘FeO’)-MgO, K 2 O-MgO, and TiO 2 -MgO. A four-unit informal stratigraphy has been adopted in order to define the relations between chemical composition and stratigraphic position. From oldest to youngest, the four stratigraphic units are (1) lower basalt of Bond (1963) and Picture Gorge basalt, (2) lower Yakima basalt, (3) middle Yakima basalt, and (4) upper Yakima basalt. Most of the Picture Gorge and lower basalt flows are relatively rich in MgO (approximately 4.5 to 7.1 percent) and are distinguished by intermediate SiO 2 relative to MgO. Furthermore, the Picture Gorge basalt generally has low K 2 O relative to MgO. The lower Yakima basalt consists almost entirely of flows with relatively low MgO content (approximately 3.0 to 5.5 percent) and with the highest SiO 2 relative to MgO of any flows of the Columbia River basalt. The middle Yakima basalt contains flows of three distinct chemical types, which together cover the same MgO range as the lower Yakima flows but which have considerably lower SiO 2 and higher ‘FeO’ and TiO 2 relative to MgO. Flows in the upper Yakima basalt are of diverse composition; two of the youngest flows are distinguished by having the lowest SiO 2 and highest ‘FeO’, TiO 2 , and P 2 O 5 relative to MgO of any analyzed Columbia River basalt. Flows of one or more chemical types may form the dominant lithology in a stratigraphic unit, but single flows of the same chemical types may occur in any stratigraphic unit. Some lava sampled in the eastern part of the plateau has more TiO 2 than does lava of otherwise similar composition sampled in the western part of the plateau. This is tentatively interpreted as reflecting a heterogeneous composition for the mantle beneath the Columbia Plateau.

Oregon, Washington↗
USGS1973

Miocene tholeiitic basalts of coastal Oregon and Washington and their relations to coeval basalts of the Columbia Plateau

Note: This paper is dedicated to Aaron and Elizabeth Waters on the occasion of Dr. Waters' retirement. Tholeiitic basalt flows and breccias of Miocene age in western Oregon and Washington form three distinct stratigraphic units. Each unit was erupted from coastal vents marked by dikes and sills of the same composition as associated extrusive rocks. The three coastal basalt units are interbedded with predominantly marine sedimentary rocks of middle to late Miocene age. These units are here named, from older to younger, the Depoe Bay Basalt, Cape Foulweather Basalt, and basalt of Pack Sack Lookout. The three units can be distinguished by their petrographic characteristics. The Depoe Bay Basalt is nonporphyritic; Cape Foulweather Basalt has sparse large labradorite phenocrysts; and Pack Sack basalt has labradorite phenocrysts with numerous pyroxene and glass inclusions as well as augite and olivine phenocrysts. Chemical analyses of basalts from these three units show that each has a distinct and uniform composition. The Depoe Bay Basalt is characterized by high SiO 2 content; the Cape Foulweather Basalt has high content of total iron, TiO 2 , and P 2 O 5 ; and Pack Sack basalt is marked by relatively high MgO and CaO content. The Depoe Bay Basalt, Cape Foulweather Basalt, and basalt of Pack Sack Lookout on the coast occur in the same stratigraphic order and are essentially the same ages as three basalt units that erupted on the Columbia Plateau. The plateau-derived units are the Yakima and late-Yakima petrographic types of Waters (1961) and the Pomona flow of Schmincke (1967). The virtual identity in chemical composition of the Depoe Bay Basalt and Yakima-type basalt, the Cape Foulweather Basalt and the late-Yakima–type basalt, and the Pack Sack basalt and the Pomona basalt flow indicate that each pair is consanguineous. Fissure vents for the plateau basalt are located in eastern Oregon and Washington and western Idaho more than 500 km east of the coastal vent areas. Thus, a regional mechanism of magma generation or emplacement is required. Three models of magma genesis considered in this report are: (1) partial melting of the subducted Juan de Fuca plate; (2) partial melting along a nearly horizontal shear zone at the base of the American plate; and (3) partial melting within the asthenosphere and fractionation during ascent of the magma.

Oregon, Washington↗
USGS1970

Strontium isotopes in some Cenozoic lavas from Oregon and Washington

The 87 Sr/ 86 Sr ratios have been determined in 22 volcanic rocks from Oregon and Washington. The emphasis of the study was on andesites and dacites, but several basalts were included. Most of the samples have a very limited range in strontium isotopic composition and all fall within variations previously defined for oceanic basalts. There are no systematic differences between lavas erupted through the pre-Cenozoic basement and those erupted in the Columbia River Embayment. It is concluded that the role played by crustal rocks in the generation of these andesites and dacites is minor or nonexistent, but assimiliation of crustal material may have been a factor for some of the basalts of the Columbia River Group.

Oregon, Washington↗
USGS1969

Sediment transport by streams in the Walla Walla River basin, Washington and Oregon, July 1962 - June 1965

The Walla Walla River basin covers about 1,760 square miles in southeastern Washington and northeastern Oregon. From the 6,000-foot crest of the Blue Mountains on the east to the 340-foot altitude of Lake Wallula (Columbia River) on the west, the basin is drained by the Touchet River and Dry Creek, entirely within Washington, and by Mill Creek, North and South Forks Walla Walla River, and Pine Creek-Dry Creek, which all head in Oregon. The central lowland of the basin is bordered on the north by Eureka Flat, Touchet slope, and Skyrocket Hills, on the east by the Blue Mountains, and on the south by the Horse Heaven Hills. The basin is underlain by basalt of the Columbia River Group, which .is the only consolidated rock to crop out in the region. Various unconsolidated fluviatile, lacustrine, and eolian sediments cover the basalt. In the western part of the basin the basalt is overlain by lacustrine deposits of silt and sand which in places are mantled by varying thicknesses of loessal deposits. In the northern and central parts of the basin the loess is at least 100 feet thick. The mountainous eastern part of the basin is underlain at shallow depth by basalt which has a residual soil mantle weathered from the rock. The slopes of the mountains are characterized by alluvial fans and deeply cut stream valleys ,filled with alluvium of sand, gravel, and cobbles. Average annual precipitation in the basin ranges from less than 10 inches in the desert-like areas of the west to more than 45 inches in the timbered mountains of the east; 65 percent of the precipitation occurs from October through March. The average runoff from the basin is about 4.8 inches per year. Most of the runoff occurs during late winter and early spring. Exceptionally high runoff generally results from rainfall and rapid melting of snow on partially frozen ground. During the study period, July 1964-June 1965, average annual sediment yields in the basin ranged from 420 tons per square mile in the mountainous area to more than 4,000 tons per square mile in the extensively cultivated northern and central parts of the basin, which are drained by the Touchet River and Dry Creek. The Touchet River and Dry Creek transported approximately 80 percent of the total sediment load discharged from the Walla Walla River basin. The highest concentrations were contributed by the loessal deposits in the Dry Creek drainage. Two runoff events resulting from rain and snowmelt on partially frozen ground produced 76 percent of the suspended sediment discharged from the basin during the study period. The maximum concentration measured, 316,000 milligrams per liter, was recorded for Dry Creek at Lowden on December 23. 1964. Daily suspended-sediment concentrations for the Walla Walla River near Touchet exceeded 700 milligrams per liter about 10 percent of the time, and 14,000 milligrams per liter about 1 percent of the time. The discharge-weighted mean concentration for the 3-year period of study was 7,000 milligrams per liter. Silt predominates in the suspended sediment transported by all streams in the basin. On the average, sediment from streams draining the Blue Mountains was composed of 20 percent sand, 60 percent silt, and 20 percent clay ; for streams draining the Blue Mountains slope-Horse Heaven Hills area, the percentages are 9, 65, and 26, respectively ; and for those draining the Skyrocket Hills-Touchet slope, the percentages are 5, 75, and 20, respectively. The bedload in the mountain and upland streams was estimated to be about 5-12 percent as much as the suspended load. For the Walla Walla River and its tributaries in the lower basin area, the bedload was estimated to be only about 2-8 percent as much as the suspended load.

Oregon, Washington↗