USGS Science⌕ Search

Geology topics

Research about Montana

Source-linked reports with geographic coverage including Montana.

At least 937 records · Page 52Linked to original sources
USGS1968

Lead and strontium isotope studies of the Boulder Batholith, Southwestern Montana

The isotopic composition of lead in feldspar varies widely from pluton to pluton of the Late Cretaceous Boulder batholith, encompassing the following ranges in isotopic values: 16.9-18.1 for Pb 206 /Pb 204 ; 15.4-15.7 for Pb 207 /Pb 204 ; and 37.7-38.5 for Pb 205 /Pb 204 . Although each pluton has a characteristic isotopic composition, the fact that Pb 206 /Pb 204 for the Butte Quartz Monzonite varies by 1.3 percent, compared to a range of about 8.6 percent for the batholith as a whole, suggests that perfect isotopic mixing of the magma was not always attained. Whole rock initial Sr 87 /Sr 88 for the entire batholith ranges from 0.705 to 0.710, comparable to ranges for the Sierra Nevada and British Columbia batholiths. Ore leads of the Butte district are isotopically very similar to feldspar leads of the host Butte Quartz Monzonite. This isotopic similarity was interpreted by Murthy and Patterson (1961a) to indicate complete mixing of independently derived feldspar lead and ore lead rather than close genetic relationship. However, detailed study of the only sample in the present investigation, from the Donald pluton, that clearly has mixed leads shows significant differences in lead isotopic composition between megacryst K-feldspar and both the groundmass K-feldspar and plagioclase, indicating that isotopic mixing of leads is not complete, even within a single hand specimen. Spatial relations of isotopic differences among the various plutons strongly suggest that complete mixing of leads of different isotopic composition from the magma did not occur in the Butte Quartz Monzonite nor in any other pluton of the batholith, and that the isotopic similarity between Butte ore and feldspar lead of the host rock indeed stems from a genetic association. Lead and strontium isotope ratios generally behave in a similar way; that is, the more radiogenic the lead in a rock, the more radiogenic the strontium. The source of the lead which could produce the isotope variations observed for the batholith is calculated to have a mean age of about 2,200 m.y., which is compatible with ages of Precambrian crystalline rocks in the region, and an isotopic makeup with U 238 /pb 204 <9, Th/U > 4, and Rb/Sr of 0.03-0.09. However, no large volumes of prebatholith rocks exposed in the Boulder batholith region are of the required isotopic composition, which is typical of basaltic-gabbroic or quartz dioritic chemical composition. Models involving complete melting of possible source materials to account for the isotope variations are considered and rejected. Mechanisms involving par.tial melting of lower crustal or upper mantle source material appear to be the most viable in explaining the observed isotopic compositions. Assimilation of upper crustal material (i.e., the Precambrian Belt and pre-Belt rocks, in which the lead and strontium are more radiogenic than in the batholith rocks) may have accompanied partial melting of the lower crust or upper mantle and indeed must have played a major role if the source material had a composition isotopically comparable to that observed for oceanic tholelites (i.e., low Th/U, U 238 /Pb 204 and Rb/Sr), but would be relatively unimportant if the source material were sufficiently radiogenic to begin with as might be expected from basalt, gabbro, or quartz diorite compositions 2,200 m.y. old. © 1968 Society of Economic Geologists, Inc.

Montana↗
USGS1968

Overlapping plutonism, volcanism, and tectonism in the boulder batholith region, western Montana

It is well known that the Boulder batholith region experienced intensive plutonism, volcanism, and tectonism that all began in Late Cretaceous time, after at least 700 m.y. of structural and igneous inactivity except for sporadic epeirogeny. Recent stratigraphic, structural, paleontologic, arid, especially, radiometric evidence makes it possible to date these dynamic events rather closely. The time relations that are revealed do not form a simple sequence of volcanism-folding-thrusting-batholith emplacement, as has often been supposed, but involve an intertwined complex. Significant volcanism began ∼ 85 m.y. ago in late Coniacian or early Santonian time, with deposition of the thick, local tuffaceous Slim Sam Formation. Volcanism climaxed from 77 to 79 m.y. ago, in early Campanian time, when the region was buried under at least 10,000 feet of calc-alkalic volcanic and volcaniclastic rocks, which included many sheets of welded tuff - the Elkhorn Mountains Volcanics -, and a vast amount of contemporaneous ash was airborne beyond the region. Major volcanism ceased ∼ 73 m.y. ago, late in the Campanian, not to recur until early Eocene time, ∼ 50 m.y. ago. The bulk of the batholith was emplaced beneath and within the volcanic edifice in early and middle Campanian time, during a 6 m.y. span from 78 to 72 m.y. ago, and some leucocratic masses were intruded during the next few million years, so that the whole batholith was emplaced within about 10 m.y. Folding at and near the site of the batholith began in late Coniacian or Santonian time and culminated before middle Campanian time; the main folding north and east of the batholith was post-Campanian, probably Maestrichtian. Thrusting began before middle Santonian time, and recurred intermittently well into the Maestrichtian, or even a little later. Thus volcanism, plutonism, folding, and thrusting began and ended within a few million years of each other, during the last 20 m.y. of the Cretaceous. Major folding, thrusting, and volcanism started about the same time, though not always at the same places, and a little earlier than plutonism. In any given locality, volcanism ended before major folding; the climax of plutonism followed the climax of volcanism; thrusting preceded and accompanied plutonism near the batholith, but followed plutonism farther away; thrusting ended a little later than folding. These dynamic processes so closely related in time and space must also be genetically related in the Boulder batholith region. Gilluly's (1965) conclusion that the orogeny which produced the great Cretaceous thrusts of Montana was "essentially without plutonic associations" is not tenable.

Montana↗
USGS1968

Article navigation zonal distribution of variations in structural state of alkali feldspar within the Rader Creek pluton, Boulder Batholith, Montana

The granodioritic Rader Creek pluton of the composite Boulder batholith contains microperthitic alkali feldspar of bulk composition Or 65 to Or 86 with a structurally variable potassic phase. Complete cell parameters, 2V measurements, and bulk composition are given for 11 feldspar samples. The 131 and 131 reflections for these and 58 additional samples show the following structural types in the potassic phase: orthoclase only; orthoclase with subordinate maximum or near-maximum microcline (obliquity = 0.75–1.00); orthoclase with subordinate intermediate microcline (obliquity = 0.64–0.71); and intermediate microcline (obliquity = 0.56–0.77) with subordinate orthoclase. Within the pluton different feldspar structural types occur in zones whose boundaries are approximately parallel to contacts with younger intrusive rocks cutting the Rader Creek pluton but are, in places, nearly perpendicular to zonation within the pluton defined by rock composition. In general, the orthoclase zone is closest to the contact with younger intrusives; the intermediate microcline zone is the most distant. Bulk compositions of alkali feldspar are more potassic in the orthoclase zone than elsewhere. The data suggest a complex history for the alkali feldspar, involving at least two stages: 1. Exsolution and partial inversion of orthoclase to intermediate microcline during cooling of the Rader Creek pluton; 2. Transformation of the intermediate-microcline assemblage to orthoclase during reheating of the pluton at the time of intrusion of younger plutons of the batholith. The transitional stage in this transformation is characterized by orthoclase co-existing with subordinate microcline, whose obliquity usually approaches that of maximum microcline.

Montana↗
USGS1968

Diatremes with kimberlitic affinities in north-central Montana

Diatremes in the Missouri River Breaks demonstrate systematic subsidence-ring structure, contain inclusions derived from far above and far below, and have been produced by gas-rich eruptions of alkalic ultramafic magmas. Similar magmas have produced diatremes in many localities in the world and are known to be closely associated with and probably parental to kimberlites.

Montana↗
USGS1968

Preliminary interpretation of a seismic-refraction profile across the Large Aperture Seismic Array, Montana

A reversed seismic-refraction profile extending northeastward from Greycliff, Montana, across the Large Aperture Seismic Array (LASA) to Charleson, North Dakota, indicates that the crust of the earth consists of two layers with P-wave velocities of 6.1 km/sec and 6.7 km/sec, and that the upper-mantle velocity is 8.3 km/sec. The Mohorovicic discontinuity is 50-km deep at Charleson and remains at nearly the same depth southwestward for a distance of about 300 km, from where it slopes upward to the southwest at about 2° to a depth of 41 km near Greycliff, Montana.

Montana↗
USGS1967

Stratigraphy and correlation of the precambrian belt supergroup of the southern Lewis and Clark Range, Montana

Several well-exposed and little-deformed Belt Supergroup sections have been studied in the southern Lewis and Clark Range . In the area studied, the Belt thins eastward or northeastward due both to primary sedimentation and to pre-Middle Cambrian erosion. These rocks can now be more precisely correlated with the well-known sections near Bonner, Helena, and Glacier National Park. In the western part of the area, the Missoula Group is thickest and lithologically intermediate between the sections at Bonner and Marias Pass. Formation names from these two sections are applied in the southern Lewis and Clark Range . The thin Belt sequence in the eastern part of the area includes the lower part of the Missoula Group and older formations that may be traced southward into the Helena, Empire, and Spokane Formations of the Helena area. Consequently, the Helena Dolomite of the Helena area, the Siyeh Formation of the Marias Pass area, and the "Newland Limestone" of the Bonner area are probably lateral equivalents.

Montana↗