USGS Science⌕ Search

Geology topics

Research about Montana

Source-linked reports with geographic coverage including Montana.

At least 469 records · Page 26Linked to original sources
USGS2000

Analytical results for Bullion Mine and Crystal Mine waste samples and bed sediments from a small tributary to Jack Creek and from Uncle Sam Gulch, Boulder River watershed, Montana

Metal-mining related wastes in the Boulder River basin study area in northern Jefferson County, Montana affect water quality as a result of acid-generation and toxic-metal solubilization. Mine waste and tailings in the unnamed tributary to Jack Creek draining the Bullion mine area and in Uncle Sam Gulch below the Crystal mine are contributors to water quality degradation of Basin Creek and Cataract Creek, Montana. Basin Creek and Cataract Creek are two of three tributaries to the Boulder River in the study area. The bed sediment geochemistry in these two creeks has also been affected by the acidic drainage from these two mines. Geochemical analysis of 42 tailings cores and eleven bed-sediment samples was undertaken to determine the concentrations of Ag, As, Cd, Cu, Pb, and Zn present in these materials. These elements are environmentally significant, in that they can be toxic to fish and/or the invertebrate organisms in the aquatic food chain. Suites of one-inch cores of mine waste and tailings material were taken from two breached tailings impoundments near the site of the Bullion mine and from Uncle Sam Gulch below the Crystal mine. Forty-two core samples were taken and divided into 211 subsamples. The samples were analyzed by ICP-AES (inductively coupled plasma-atomic emission spectroscopy) using a mixed-acid (HC1-HNO 3 -HC1O 4 -HF) digestion. Results of the core analyses show that some samples contain moderate to very high concentrations of arsenic (as much as 13,000 ppm), silver (as much as 130 ppm), cadmium (as much as 260 ppm), copper (as much as 9,000 ppm), lead (as much as 11,000 ppm), and zinc (as much as 18,000 ppm). Eleven bed-sediment samples were also subjected to the mixed-acid total digestion, and a warm (50°C) 2M HC1-1% H 2 O 2 leach and analyzed by ICP-AES. Results indicate that bed sediments of the Jack Creek tributary are impacted by past mining at the Bullion and Crystal mines. The contaminating metals are mostly contained in the 2M HC1-1% H 2 O 2 leachable phase, which are the hydrous amorphous iron- and manganese-hydroxide coatings on detrital sediment particles.

Montana↗
USGS2000

Ground geophysical study of the Buckeye mine tailings, Boulder watershed, Montana

The Buckeye mine site is located in the Boulder River watershed along Basin Creek, in northern Jefferson County, Montana. This project is part of the Boulder River watershed Abandoned Mine Lands Initiative, and is a collaborative effort between the U.S. Geological Survey and Bureau of Land Management in the U.S. Department of the Interior, and the U.S. Forest Service in the U.S. Department of Agriculture. The site includes a large flotation milltailing deposit, which extends to the stream and meadows below the mine. These tailings contain elevated levels of metals, such as silver, cadmium, copper, lead, and zinc. Metal-rich fluvial tailings containing these metals, are possible sources of ground and surface water contamination. Geophysical methods were used to characterize the sediments at the Buckeye mine site. Ground geophysical surveys, including electromagnetics, DC resistivity, and total field magnetic methods, were used to delineate anomalies that probably correlate with subsurface metal contamination. Subsurface conductivity was mapped using EM-31 and EM-34 terrain conductivity measuring systems. The conductivity maps represent variation of concentration of dissolved solids in the subsurface from a few meters, to an approximate depth of 30 meters. Conductive sulfides several centimeters thick were encountered in a shallow trench, dug in an area of very high conductivity, at a depth of approximately 1 to1.5 meters. Laboratory measurements of samples of the sulfide layers show the conductivity is on the order of 1000 millisiemens. DC resistivity soundings were used to quantify subsurface conductivity variations and to estimate the depth to bedrock. Total field magnetic measurements were used to identify magnetic metals in the subsurface. The EM surveys identified several areas of relatively high conductivity and detected a conductive plume extending to the southwest, toward the stream. This plume correlates well with the potentiometric surface and direction of ground water flow, and with water quality data from monitoring wells in and around the tailings. The electrical geophysical data suggests there has been vertical migration of high dissolved solids. A DC sounding made on a nearby granite outcrop to the north of the mine showed that the shallow conductivity is on the order of 5 millisiemens/m. Granite underlying the mine tailings, with similar electrical properties as the outcropping area, may be more than 30 meters deep.

Montana↗
USGS2000

Chemical data and lead isotopic compositions of geochemical baseline samples from streambed sediments and smelter slag, lead isotopic compositions in fluvial tailings, and dendrochronology results from the Boulder River watershed, Jefferson County, Montana

Introduction As a part of the U.S. Geological Survey Abandoned Mine Lands Initiative, metal-mining related wastes in the Boulder River study area in northern Jefferson County, Montana, have been evaluated for their environmental effects. The study area includes a 24-km segment of the Boulder River in and around Basin, Montana and three principal tributaries to the Boulder River: Basin Creek, Cataract Creek, and High Ore Creek. Mine and prospect waste dumps and mill wastes are located throughout the drainage basins of these tributaries and in the Boulder River. Mine-waste material has been transported into and down streams, where it has mixed with and become incorporated into the streambed sediments. In some localities, mine waste material was placed directly in stream channels and was transported downstream forming fluvial tailings deposits along the stream banks. Water quality and aquatic habitat have been affected by trace-element-contaminated sediment that moves from mine wastes into and down streams during snowmelt and storm runoff events within the Boulder River watershed. Present-day trace element concentrations in the streambed sediments and fluvial tailings have been extensively studied. However, in order to accurately evaluate the impact of mining on the stream environments, it is also necessary to evaluate the pre-mining trace-element concentrations in the streambed sediments. Three types of samples have been collected for estimation of pre-mining concentrations: 1) streambed sediment samples from the Boulder River and its tributaries located upstream from historical mining activity, 2) stream terrace deposits located both upstream and downstream of the major tributaries along the Boulder River, and 3) cores through sediment in overbank deposits, in abandoned stream channels, or beneath fluvial tailings deposits. In this report, we present geochemical data for six stream-terrace samples and twelve sediment-core samples and lead isotopic data for six terrace and thirteen core samples. Sample localities are in table 1 and figures 1 and 2, and site and sample descriptions are in table 2. Geochemical data have been presented for cores through fluvial tailings on High Ore Creek, on upper Basin Creek, and on Jack Creek and Uncle Sam Gulch. Geochemical and lead isotopic data for modern streambed-sediment samples have been presented by Fey and others. Lead isotopic determinations in bed sediments have been shown to be an effective tool for evaluating the contributions from various sources to the metals in bed sediments. However, in order to make these calculations, the lead isotopic compositions of the contaminant sources must also be known. Consequently, we have determined the lead isotopic compositions of five streambed-sediment samples heavily contaminated with fluvial mine waste immediately downstream from large mines in the Boulder River watershed in order to determine the lead isotopic signatures of the contaminants. Summary geochemical data for the contaminants are presented here and geochemical data for the streambed-sediment samples are given by Fey and others. Downstream from the Katie mill site and Jib tailings, fluvial deposits of mill tailings are present on a 10-m by 50-m bar in the Boulder River below the confluence with Basin Creek. The source of these tailings is not known, but fluvial tailings are also present immediately downstream from the Katie mill site, which is immediately upstream from the confluence with Basin Creek. Nine cores of fluvial tailings from this bar were analyzed. Dendrochronology samples were taken at several stream terrace localities to provide age control on the stream terrace deposits. Trees growing on the surfaces of stream terraces provide a minimum age for the terrace deposits, although floods subsequent to the trees' growth could have deposited post-mining overbank deposits around the trees. Historical data were also used to provide estimates of minimum ages of cultural features and to bracket the age of events.

Montana↗
USGS2000

Water-quality data for streams in the Boulder River Watershed, Jefferson County, Montana

Chemical data were collected in the Boulder River watershed of southwestern Montana during 1996-99 as part of a detailed interdisciplinary study characterizing the effects of historical inactive mines on streams in the watershed. This report presents water-quality data collected by the U.S. Geological Survey for physical properties, major ions, nutrients, and trace elements for 62 sites in and near the watershed. Supplementary historical water-quality data for 83 sites also are presented.

Montana↗
USGS2000

Data for Quaternary faults in western Montana

The "World Map of Major Active Faults" Task Group is compiling published fault data, developing a digital database of the fault data, and preparing a series of maps for the United States and other countries in the western Hemisphere. The data is intended to portray the locations, ages, and activity rates of major earthquake-related features such as faults, folds, and liquefaction features that have geologic evidence of Quaternary (1.6 Ma) deformation. The Western Hemisphere effort is sponsored by International Lithosphere Program (ILP) Task Group II-2; the data compilation, database, and map for the United States is funded largely by the National Earthquake Hazard Reduction Program (NEHRP) through the U.S. Geological Survey. The ILP effort in the Western Hemisphere is coordinated by Michael N. Machette, the digital database is designed and managed Kathleen M. Haller, and map data are digitized and manipulated by Richard L. Dart. In addition to meeting the goals of the Task Group II-2, this effort represents a key contribution to the new Global Seismic Hazards Assessment Program (ILP Task Group II-0) for the International Decade for Natural Disaster Reduction. This compilation, which documents the published data on Quaternary surface faulting in western Montana, is one of many similar state or regional compilations that are planned for the project. Compilations for Arizona (Pearthree, 1998 #2945), Colorado (Widmann and others, 1998 #3441), New Mexico (Machette and others, 1998), and West Texas (Collins and others, 1996 #993) are currently available and the compilation for features east of the Rocky Mountain front will be available in early 2000 (Crone and Wheeler, in press). All are primarily a catalog of data that includes a variety of geographic, geologic, and paleoseismologic parameters for known or assumed Quaternary faults. These data compilations, the digital database, and the companion maps summarize the published information on known tectonic features and present the information in an internally consistent format. The compilations will be available in digital database format on the WorldWide Web in the near future, which will greatly improve their utility. Release of data for individual states and regions within the United States in this text-based format was necessary because of the time required to develop the national database.

Montana↗
USGS2000

Hydrology of the Helena area bedrock, west-central Montana, 1993-98

The Generalized Bedrock Geologic Map of the Helena Area, West-Central Montana (plate 1 in the report) provides an intermediate-scale overview of bedrock in the Helena area. The geologic map has been compiled at a scale of 1:100,000 from the most widely available sources of geologic map information (see index to geologic mapping on pl. 1). That information has been updated by M.W. Reynolds for this report with more recent geologic mapping and field revision of published maps. All well locations and all bedrock units penetrated during drilling have been confirmed on geologic maps at the largest scale available. Source geologic maps are all at scales larger than 1:100,000 scale. Care has been taken to ensure accurate representation of the original geology at the compilation scale. However, positional accuracy of some features might be somewhat diminished at the smaller scale of the base map when compared with the original data source. Also, line thicknesses for contacts and faults necessarily assume a greater width, relative to the real geologic feature, at the scale of the generalized map than on any original map. The map is not intended for large-scale, site-specific detailed planning. Bedrock units throughout the Helena area are generally covered by young surficial deposits such as alluvium, colluvium, glacial debris, or windblown sediment. Thickness of such deposits varies from veneers through which the underlying bedrock is clearly discernible to major thicknesses that conceal all underlying bedrock and structure. Boundaries of major accumulations of surficial deposits are attributed separately from bedrock contacts. These boundaries should not be considered precise at the map scale or at larger scales. Boundaries shown may be less accurate positionally than bedrock contacts and faults because (1) surficial deposits commonly thin to a knife edge; (2) different mappers will interpret the edge differently when drawing a boundary; or (3) the original geologic map maker was concerned principally with bedrock units and structure and thus overlooked, or did not originally map as consistently, some surficial deposits. Veneers of surficial sediment, when saturated, can be local sources of recharge to underlying bedrock. Use of the generalized map to define their distribution does not substitute for site specific mapping of such deposits. Specific knowledge is needed to determine the water-bearing properties of the geologic units at and surrounding a site because the units, including the igneous and metamorphic rocks, have internal differences in stratigraphy, composition, mineralogy and grain size or crystallinity. These differences, together with structural imprints such as faults, folds, and the spacing, orientation, degree of openness of fractures, and extent and type of mineral filling in fractures and faults, all affect the ability of rocks to store and transmit water.

Montana↗
USGS2000

Application of snow models to snow removal operations on the Going-to-the-Sun Road, Glacier National Park

Snow removal, and the attendant avalanche risk for road crews, is a major issue on mountain highways worldwide. The Going-to-the-Sun Road is the only road that crosses Glacier National Park, Montana. This 80-km highway ascends over 1200m along the wall of a glaciated basin and crosses the continental divide. The annual opening of the road is critical to the regional economy and there is public pressure to open the road as early as possible. Despite the 67-year history of snow removal activities, few stat on snow conditions at upper elevations were available to guide annual planning for the raod opening. We examined statistical relationships between the opening date and nearby SNOTEL data on snow water equivalence (WE) for 30 years. Early spring SWE (first Monday in April) accounted for only 33% of the variance in road opening dates. Because avalanche spotters, used to warn heavy equipment operators of danger, are ineffective during spring storms or low-visibility conditions, we incorporated the percentage of days with precipitation during plowing as a proxy for visibility. This improved the model's predictive power to 69%/ A mountain snow simulator (MTSNOW) was used to calculate the depth and density of snow at various points along the road and field data were collected for comparison. MTSNOW underestimated the observed snow conditions, in part because it does not yet account for wind redistribution of snow. The severe topography of the upper reaches of the road are subjected to extensive wind redistribution of snow as evidence by the formation of "The Big Drift" on the lee side of Logan Pass.

Montana↗
USGS2000

An elevational gradient in snowpack chemical loading at Glacier National Park, Montana: implications for ecosystem processes

The accumulation and melting of mountain snowpacks are major drivers of ecosystem processes in the Rocky Mountains. These include the influence of snow water equivalent (SWE) timing and amount of release on soil moisture for annual tree growth, and alpine stream discharge and temperature that control aquatic biota life histories. Snowfall also brings with it atmospheric deposition. Snowpacks will hold as much as 8 months of atmospheric deposition for release into mountain ecosystems during the spring melt. These pulses of chemicals influence soil microbiota and biogeochemical processes affecting mountain vegetation growth. Increased atmospheric nitrogen inputs recently have been documented in remote parts of Colorado's mountain systems but no baseline data exist for the Northern Rockies. We examined patterns of SWE and snow chemistry in an elevational gradient stretching from west to east over the continental divide in Glacier National Park in March 1999 and 2000. Sites ranged from 1080m to 2192m at Swiftcurrent Pass. At each site, two vertically-integrated columns of snow were sampled from snowpits up to 600cm deep and analyzed for major cations and anions. Minor differences in snow chemistry, on a volumetric basis, existed over the elvational gradient. Snowpack chemical loading estimates were calculated for NH 4 , SO 4 and NO 3 and closely followed elevational increases in SWE. NO 3 (in microequivalents/square meter) ranged from 1,000 ueq/m 2 at low elevation sites to 8,000+ ueq/m 2 for high elevation sites. Western slopes received greater amounts of SWE and chemical loads for all tested compounds.

Montana↗
USGS2000

Effect of browsing on willow in the Steel Creek grazing allotment

The Steel Creek drainage serves as both wildlife range (primarily moose and elk) and as a livestock grazing allotment. For some years there has been concern about the effect of browsing on willows. Dense clusters of twigs have formed at the end of branches; entire stems of some plants have died. As of 1996, the relative impacts attributable to each of the ungulate species had not been documented. In 1997 a study was begun to determine: a) the current level of browsing, b) the history of past browsing pressure, and c) the relative roles of the different ungulate species. All areas surveyed in 1997 were found to be 100% intensely browsed as measured by the methods described in Keigley and Frisina (1998). A reconstructed history of aspen browsing indicated that browsing pressure increased sometime in the mid-1980s (Keigley and Frisina 1998: pp. 122-124). The intense aspen browsing occurred east of the Steel Creek Ranger Station in an area in which all livestock have been excluded for several years, thus indicating that wildlife were responsible. While the 1997 study indicated that wildlife had a significant impact on browse condition, no data were collected that documented the potential impact of livestock within grazed areas, or the combined impact of livestock and wildlife. In 1998 we began a study of browsing impacts in the Steel Creek grazing allotment. The objectives of the study were to: 1. Determine willow growth potential, 2. Document the effect of browsing, 3. Document the response of willows to protection from browsing, 4. Determine the amount consumed each year, 5. Distinguish between the impacts of livestock and wildlife, and 6. Evaluate the consistency of the measurement methods. View upstream from the study area. Salix geyerriana is the dominant willow species. Salix drummondiana and S. Boothii are less common; older individuals of both species grow to about 2-m tall. Salix bebbiana is much less common, and where present, is browsed close to ground level. The carcass of an old Bebb willow that had attained typical stature is located near the study area. Beaver are absent. The remains of relic beaver dams indicate that beaver were once an important hydrologic influence.

Montana↗
USGS2000

Geologic map of the Lima 30’ x 60’ quadrangle, southwest Montana

This geologic map represents a compilation of mostly previously unpublished maps by numerous authors. The map is divided into three areas of responsibility: 1) the Tendoy Mountains and western Centennial Mountains, mapped and compiled by Betty Skipp, Susanne Janecke, and Bill Perry (Part A); 2) the Snowcrest Range, mapped by Edward T. Ruppel (Part B), and 3) the remainder of the area, including the Sage Creek basin, the Red Rock Hills, the Blacktail Range, and the Upper Blacktail Deer Creek valley, compiled and mapped by Jeff Lonn and Jim Sears, with data also contributed by Bill Fritz, Hugh Hurlow, and Rob Thomas (Part C). Figure 1 shows mapping responsibilities. The geologic map (Plate 1) is accompanied by this text pamphlet describing map units for each of the three areas. The same lithologic distinctions among units and the same unit labels were used where possible, usually where formal stratigraphic nomenclature existed, but each area has its own informal Tertiary and Quaternary stratigraphy. References are also given separately in each section. However, correlation diagrams for each of the three areas are shown in a single Correlation Chart for the whole quadrangle (Figure 2). Plate 2, at the same scale, is provided in order to show more readily the names being applied to specific faults and folds, particularly in the Tendoy Mountains and western Centennial Mountains.

Montana↗
USGS1999

Geologic map of the Sedan quadangle, Gallatin and Park Counties, Montana

This quadrangle lies 6.4 km (4 mi) northeast of Bozeman, Mont., in southwestern Montana. Metamorphic, sedimentary, and volcanic rocks of Precambrian to Tertiary age are exposed in the Bridger Range and southwestern margin of the Crazy Mountains Basin in a crustal cross section and a structural triangle zone. Surface geology records Precambrian extension, Late Paleocene east-vergent contraction, including backthrusts, and Holocene basin-range extension.

Montana↗
USGS1999

Map showing the potential for mineral deposits associated with Precambrian mafic and ultramafic rocks in the Blacktail and Henrys Lake Mountains and the Greenhorn and Ruby Ranges of southwestern Montana

In response to requests from the Bureau of Land Management (BLM) and the U.S. Forest Service (USFS), the U.S. Geological Survey (USGS) conducted a mineral resource assessment in the Dillon BLM Resource Area in Beaverhead and Madison Counties, southwestern Montana. These agencies use mineral resource data in creating and updating land-use management plans for federal lands for the reasonably foreseeable future. Mineral resources that have not been developed in the past may be developed in the future, based on changing commodity demands and market conditions. Therefore, federal land managers need geologic information on known mineral occurrences as well as on areas that are permissive for the occurrence of undiscovered mineral resources. This map was prepared to provide this type of geologic information for mineral deposits that can be associated with ultramafic rocks. Areas of exposed Precambrian ultramafic rocks are labeled with uppercase letters (A-F). Sources of geologic maps used to compile this map are shown on the smaller index map ("Index to Geologic Mapping"); lowercase letters (a-m) on the index map are keyed to the reference list.

Montana↗
USGS1999

Analytical results for 35 mine-waste tailings cores and six bed sediment samples, and an estimate of the volume of contaminated materials at Buckeye meadow on upper Basin Creek, northern Jefferson County, Montana

Metal-mining related wastes in the Boulder River basin study area in northern Jefferson County, Montana have been implicated in their detrimental effects on water quality with regard to acid-generation and toxic-metal solubilization. Flotation-mill tailings in the meadow below the Buckeye mine, hereafter referred to as the Buckeye mill-tailings site, have been identified as significant contributors to water quality degradation of Basin Creek, Montana. Basin Creek is one of three tributaries to the Boulder River in the study area; bed sediments and waters draining from the Buckeye mine have also been implicated. Geochemical analysis of 35 tailings cores and six bed-sediment samples was undertaken to determine the concentrations of Ag, As, Cd, Cu, Pb,and Zn present in these materials. These elements are environmentally significant, in that they can be toxic to fish and/or the invertebrate organisms that constitute their food. A suite of one-inch cores of dispersed flotation-mill tailings and underlying premining material was taken from a large, flat area north of Basin Creek near the site of the Buckeye mine. Thirty-five core samples were taken and divided into 204 subsamples. The samples were analyzed by ICP-AES (inductively coupled plasma-atomic emission spectroscopy) using a mixed-acid digestion. Results of the core analyses show that the elements listed above are present at moderate to very high concentrations (arsenic to 63,000 ppm, silver to 290 ppm, cadmium to 370 ppm, copper to 4,800 ppm, lead to 93,000 ppm, and zinc to 23,000 ppm). Volume calculations indicate that an estimated 8,400 metric tons of contaminated material are present at the site. Six bed-sediment samples were also subjected to the mixed-acid total digestion, and a warm (50°C) 2M HCl-1% H 2 O 2 leach and analyzed by ICP-AES. Results indicate that bed sediments of Basin Creek are only slightly impacted by past mining above the Buckeye-Enterprise complex, moderately impacted at the upper (eastern) end of the tailings area, and heavily impacted at the lower (western) end of the area and downstream. The metals are mostly contained in the 2M HCl-1% H 2 O 2 leachable phase, which are the hydrous amorphous iron- and manganese-hydroxide coatings on detrital sediment particles.

Montana↗