USGS Science⌕ Search

Geology topics

Research about Mars

Source-linked reports with geographic coverage including Mars.

At least 289 records · Page 16Linked to original sources

Could Mars be dark and altered?

There is a long known dichotomy in the martian albedo, with an associated, but mostly assumed, mineralogical split as well. The bright red regions are inferred to be weathered, oxidized dust and the dark grey regions unaltered volcanic material. A number of recent analyses suggest this division is unnaturally simplistic and the association of many dark regions with the former presence of water requires a re‐examination of the spectra in light of potential alteration minerals. I present an alternate interpretation of the reflectance spectral characteristics of some dark regions on Mars that includes dark layer silicates. If their presence is confirmed on Mars this will have implications for sequestration of current and past volatile inventories, clues to the extent and type of geochemical weathering, and potential zones where bacterial life forms may have emerged.

Geophysical Research Letters↗

Erosional valleys in the Thaumasia region of Mars: Hydrothermal and seismic origins

Analysis of erosional valleys, geologic materials and features, and topography through time in the Thaumasia region of Mars using co-registered digital spatial data sets reveals significant associations that relate to valley origin. Valleys tend to originate (1) on Noachian to Early Hesperian (stages 1 and 2) large volcanoes, (2) within 50–100 km of stages 1 and 2 rift systems, and (3) within 100 km of Noachian (stage 1) impact craters >50 km in diameter. These geologic preferences explain observations of higher valley-source densities (VSDs) in areas of higher elevations and regional slopes (>1°) because the volcanoes, rifts, and craters form high, steep topography or occur in terrain of high relief. Other stage 1 and stage 2 high, steep terrains, however, do not show high VSDs. The tendency for valleys to concentrate near geologic features and the overall low drainage densities in Thaumasia compared to terrestrial surfaces rule out widespread precipitation as a major factor in valley formation (as is proposed in wann, wet climate scenarios) except perhaps during the Early Noachian, for which much of the geologic record has been obliterated. Instead, volcanoes and rifts may indicate the presence of shallow crustal intrusions that could lead to local hydrothermal circulation, melting of ground ice and snow, and groundwater sapping. However, impact-crater melt would provide a heat source at the surface that might drive away water, fonning valleys in the process. Post-stage 1 craters mostly have low nearby VSDs, which, for valleys incised in older rocks, suggests burial by ejecta and, for younger valleys, may indicate desiccation of near-surface water and deepening of the cryosphere. Later Hesperian and Amazonian (stages 3 and 4) valleys originate within 100–200 km of three young, large impact craters and near rifts systems at Warrego Valles and the southern part of Coprates rise. These valleys likely developed when the cryosphere was a couple kilometers or more thick, inhibiting valley development by hydrothermal circulation. However, eruption of groundwater may have occurred from impact-induced fracturing and lateral and perhaps minor upward transport of water due to seismic pumping. The two smaller craters formed along the plateau margin where the highest potential hydraulic head would occur in aquifers beneath the plateau. In the case of the larger crater (Lowell, 200 km in diameter), potential aquifers would likely be at depths of kilometers below the cryosphere. Seismic energy generated by the Lowell impactor would have been much greater, pumping both groundwater and perhaps fluidized slurry to the surface from beneath the cryosphere to form the young valleys and flow deposit. Along the margin of Thaumasia, tectonic pressurization of groundwater also may have contributed to valley formation. Dissection of rim materials of the Argyre impact may relate to tectonic activity and the unconsolidated state of basin ejecta.

Journal of Geophysical Research E: Planets↗

Digital structural mapping of Mars

Magmatic and tectonic activity have both contributed significantly to the surface geology of Mars. Digital structural mapping techniques have now been used to classify and date centers of tectonic activity in the western equatorial region. For example, our results show a center of tectonic activity at Valles Marineris, which may be associated with uplift caused by intrusion. Such evidence may help explain, in part, the development of the large troughs and associated outflow channels and chaotic terrain. We also find a local centre of tectonic activity near the source region of Warrego Valles. Here, we suggest that the valley system may have resulted largely from intrusive-related hydrothermal activity. We hope that this work, together with the current Mars Global Surveyor mission, will lead to a better understanding of the geological processes that shaped the Martian surface.

Astronomy and Geophysics↗

Geologic map of the Dao, Harmakhis, and Reull Valles region of Mars

The geology for this map was compiled using Viking Orbiter images on 1:500,000- scale photomosaics of the Mars Transverse Mercator quadrangles -40262, -40267, and -40272. This map represents a detailed extension of regional geologic mapping of the east Hellas rim (Crown and others 1990, 1992) and is published at 1:1,000,000 scale. The map area is on the east rim of one of the largest impact structures in the Solar System, the ~2,000-km-diameter Hellas basin (fig. 1). Channeled plains, with Dao, Harmakhis , and Reull Valles as the primary drainage features, dominate much of the surface within the map area. Dao Vallis is the downstream extension of Niger Vallis , which originates on the south flank of Hadriaca Patera, north of the map area. Harmakhis Vallis and Reull Vallis appear to intersect near latitutude 38°30' S., longitude 264°30'; Harmakhis Vallis trends southwest and Reull Vallis trends southeast from the area of intersection. The source area for these major outflow channels is at the intersection of two principal rings of multiring impact basins (Potter, 1976; Schultz and Frey, 1990; fig. 1). Hellas basin is centered southwest of the map area, and the proposed Hesperia basin is centered northeast of the map area (Schultz and Frey, 1990). The eastern part of the map area contains extensive remnants of ancient mountains and crater rim materials, along with large mesa-like features. Landforms over the entire map area appear to have been modified by multiple erosional events including downslope movement, eolian, and fluvial processes. The purpose of mapping the geology of the Dao, Harmakhis , and Reull Valles region of Mars is to refine stratigraphic and geomorphologic relations among the geologic units in thearea in order to better understand the nature of, relative timing of, and interactions among martian highland surface processes.

IMAP↗

Geologic map of Pavonis Mons Volcano, Mars

The geologic map shows lava flows and fan-shaped deposits on Pavonis Mons, the central of three large shield volcanoes ( Arsia , Pavonis, and Ascr aeus Montes) that form the Tharsis Montes volcanic chain. The volcanoes lie along the crest of a regional northeast-trending rise that extends more than 3,000 km across the western equatorial region of Mars (fig. 1). The volcanic history of Pavonis Mons is similar to that of other volcanoes in the western equatorial region of Mars (Scott and others, 1981 a-c; Scott and Tanaka, 1981, 1986; Zimbelman and Edgett , 1992). Previous geologic mapping of this region (Scott and others, 1981a-c; Scott and Tanaka, 1981, 1986) shows six major lava flows that were extruded from the Tharsis volcanoes during the Early Hes perian to Late Amazonian Epochs; four of these lava flow members are present in the map area. On the northwest flank of Pavonis Mons, broad, lobate, fan-shaped deposits form a surficial cover similar to other fan-shaped deposits on the northwest flanks of Arsia , Arcaeus , and (to a lesser degree) Olympus Mons. Similar to those of Arsia Mons , the fan-shaped deposits of Pavonis Mons consists of several facies whose origins are attributed to glaciation, mass wasting, and pyroclastic volcanism origins.

IMAP↗

Geologic map of the western Ophir Planum region (MTM -10067) of Mars

The map area, in the Coprates 1:2,000,000-scale quadrangle MC-18 NW lies in the heart of the Valles Marineris trough system. The western part of Ophir Planum (36,660 km 2 ) occupies 40 percent of the map areas; parts of Candor , Melas, and Coprates Chasmata make up the remainder. The troughs contain distinct ive landslide deposits, normal faults, possible young volcanic rocks, and layered materials. Ophir Planum plateau is deformed by normal faults and grabens in an en echelon array that is unique along the Valles Marineris .

IMAP↗

Sedimentary history and mass flow structures of Chryse and Acidalia Planitiae, Mars

Geologic mapping and crater counting in Chryse and Acidalia Planitiae (GAP) reveal five major sedimentary deposits of Hesperian to Early Amazonian age, including (1) a mass flow deposited during the Early Hesperian near Deuteronilus Mensae (northeast of the map region) that may have resulted from the carving of Kasei Valles, >3000 km southwest of the exposed part of the deposit; (2) knobby plains material consisting of channel (likely; from Simud and Tiu Valles and possibly Ares and Shalbatana Valles) and mass-wasting deposits in central and eastern CAP; (3) material largely from Maja and Ares Valles emplaced in at least western and southern CAP (outcrops in southern Chryse Planitia developed thermokarst); (4) a thin mass flow covering much of southern Chryse Planitia that emanated from Simud and Tiu Valles; and (5) a thick, extensive (perhaps >3500 km across) mass flow deposit in central and northern CAP derived from accumulation and backflow of the preceding thin mass flow or perhaps melting of polar deposits. Other possible deposits may not be recognizable owing to burial by younger materials or a lack of morphologic signature. Various associated landforms appear to be consistent with the mass flow interpretations, including lobate and linear scarps along deposit edges, fractures related to desiccation of thick sediments, troughs, and ridges near the edges of the deposit indicative of secondary mass movement and deformation, pitted domes and fissure-fed flows possibly formed by sedimentary (mud) eruptions, and longitudinal channel grooves perhaps formed by roller vortices. No convincing evidence for paleoshorelines or stagnant ice sheets is found in CAP. These findings suggest that mass flow and hyperconcentrated flooding may have been the predominant processes of outflow-channel dissection in CAP. Elsewhere in the northern plains, similar landforms are prevalent. The mass flow interpretation does not require either multiple episodes of extraordinarily high water-discharge rates achieved by freeing huge volumes of water from the crust, repetitive recycling of immense volumes of water into highland aquifers at the heads of Chryse channels, or profound climate change. Mars Pathfinder will most likely land on and inspect the surface of the thin mass flow that originated from the canyons of Simud and Tiu Valles.

Journal of Geophysical Research E: Planets↗

Selection of the Mars Pathfinder landing site

The Mars Pathfinder spacecraft will land on a depositional fan near the mouth of the catastrophic outflow channel, Ares Vallis (19.5°N, 32.8°W). This site offers the prospect of analyzing a variety of rock types from the ancient cratered highlands, intermediate-age ridged plains, and reworked channel deposits. Analyses of these rocks by Pathfinder instruments will enable first-order scientific questions to be addressed, such as differentiation of the crust, the development of weathering products, and the nature of the early environment, as well as their subsequent evolution on Mars. Constraints imposed by (1) spacecraft and rover designs (which are robust), (2) entry, descent, and landing, (3) scientific potential at various sites, and (4) safety were important considerations in site selection. Engineering constraints require a 70 km by 200 km smooth, flat (low slopes) area located between 10° and 20°N that is below 0 km elevation, with average radar reflectivity, little dust, and moderate rock abundance. Three regions on Mars are between 10° and 20°N and below 0 km elevation: Chryse, Amazonis, and Isidis-Elysium. Science considerations favor sites at the mouths of outflow channels (grab bag sites offer an assay of rock types on Mars), highland sites (early crustal differentiation and climate), and sites covered with dark (unoxidized) material. Sites are considered safe if they are clearly below 0 km elevation, appear acceptably free of hazards in high-resolution (<50 m/pixel) Viking orbiter images and have acceptable reflectivity and roughness at radar wavelengths, thermal inertia, rock abundance, red to violet ratio, and albedo. Recent 3.5-cm wavelength radar observations were used to verify elevation, reflectivity, and roughness within the landing ellipses. Three sites meet all of these criteria: Ares Vallis, Tritonis Lacus, and Isidis. Although Isidis appears to be safer than Tritonis and Ares, the greater scientific potential at Ares Vallis resulted in its selection. Comparisons of the Grand Coulee (channel) and the depositional Ephrata Fan of the Channeled Scabland in eastern Washington, with Ares Vallis and its depositional fan also suggest the Ares Vallis landing site is safe and scientifically interesting.

Journal of Geophysical Research Planets↗

The imager for Mars Pathfinder experiment

The imager for Mars Pathfinder (IMP), a stereoscopic, multispectral camera, is described in terms of its capabilities for studying the Martian environment. The camera's two eyes, separated by 15.0 cm, provide the camera with range‐finding ability. Each eye illuminates half of a single CCD detector with a field of view of 14.4×14.0° and has 12 selectable filters. The ƒ/18 optics have a large depth of field, and no focussing mechanism is required; a mechanical shutter is avoided by using the frame transfer capability of the 512×512 CCD. The resolving power of the camera, 0.98 mrad/pixel, is approximately the same as the Viking Lander cameras; however, the signal‐to‐noise ratio for IMP greatly exceeds Viking, approaching 350. This feature along with the stable calibration of the filters between 440 and 1000 nm distinguishes IMP from Viking. Specially designed targets are positioned on the Lander; they provide information on the magnetic properties of wind‐blown dust, measure the wind vectors, and provide radiometric standard reflectors for calibration. Also, eight low‐transmission filters are included for imaging the Sun directly at multiple wavelengths, giving IMP the ability to measure dust opacity and potentially the water vapor content. Several experiments beyond the requisite color panorama are described in detail: contour mapping of the local terrain, multispectral imaging of the surrounding rock and soil to study local mineralogy, viewing of three wind socks, measuring atmospheric opacity and water vapor content, and estimating the magnetic properties of wind‐blown dust. This paper is intended to serve as a guide to understanding the scientific integrity of the IMP data that will be returned from Mars starting on July 4, 1997.

Journal of Geophysical Research E: Planets↗

Martian drainage densities

Drainage densities on Mars range from zero over large areas of volcanic plains to 0.3–0.5 km −1 locally on some volcanoes. These values refer to geologic units, not to drainage basins, as is normal for terrestrial drainage densities. The highest values are close to the lowest terrestrial values derived by similar techniques. Drainage densities were determined for every geologic unit portrayed on the 1:15,000,000 geologic map of Mars. Except for volcanoes the geologic unit with the highest drainage density is the dissected Noachian plains with a drainage density of 0.0074 km −1 . The average drainage density for Noachian units is 0.0032 km −1 , for Hesperian units is 0.00047 km −1 , and for Amazonian units is 0.00007 km −1 , excluding the volcanoes. These values are 2–3 orders of magnitude lower than typical terrestrial densities as determined by similar techniques from Landsat images. The low drainage densities, despite a cumulative record that spans billions of years, indicate that compared with the Earth, the channel-forming processes have been very inefficient or have operated only rarely or that the surface is extremely permeable. The high drainage density on volcanoes is attributed to a local cause, such as hydrothermal activity, rather than to a global cause such as climate change.

Journal of Geophysical Research E: Planets↗

Radar and photoclinometric studies of wrinkle ridges on Mars

Earth-based radar altimetry and image derived photoclinometric profiles were analyzed to examine both the long- and short-wavelength topography associated with wrinkle ridges on Mars. Photoclinometrically derived elevation data across wrinkle ridges were evaluated to determine the sensitivity of profiles to two empirical photoclinometric parameters, the horizontal digital number (HDN) and the scattered light value (SLV). The photoclinometric profiles are extremely sensitive to small variations in HDN. The sense of slope of a profile can be completely reversed over a range in HDN of as little as ±1. Comparably small variations in the SLV have relatively minor effects on the photoclinometrically derived elevations. The existence of elevation offsets from one side of the ridge to the other, reported in previous photoclinometric studies of martian wrinkles, were not confirmed through photoclinometry. In addition, no evidence of elevation offsets were found in Earth-based radar altimetry profiles across wrinkle ridges. In order to more accurately model wrinkle ridge topography, we controlled photoclinometrically derived elevations with long-wavelength topography obtained from the radar altimetry. The results of this study do not support kinematic models for the origin of planetary wrinkle ridges that involve deeply rooted thrust faults which separate crustal blocks at different elevations. A kinematic model involving buckling of shallow crustal layers into concentric folds that close, leading to the development of thrust faults, is consistent with wrinkle ridge morphology and terrestrial analogs. Recent geophysical studies of terrestrial analogs and the influence of shallow subsurface structures, particularly buried craters, on the localization of many wrinkle ridges on Mars suggest that thrust faults associated with the ridges are confined to the ridged plains material and do not extend into the lithosphere.

Journal of Geophysical Research E: Planets↗

Population analysis of faint galaxies with mixture modeling

We investigate the use of spectral mixture modeling to decompose the integrated spectra of several galaxies. This technique uses a linear combination of template spectra to model over 93% of the variance in Kennicutt's sample of galaxy spectra. One result of our model is a stellar population parameter for each galaxy, which correlates with both star formation rate and the population's mass-to-light ratio. Armed with the template spectra, we use mixture modeling to develop a photometric system that is independent of redshift, in order to more precisely measure the color evolution of galaxies. We show how to use the photometric system to model the composition of high-redshift galaxies in terms of the template spectra, and hence estimate their star-formation history. This photometric technique avoids being biased by the nucleus, unlike techniques which rely on slit spectra.

Astronomical Journal↗