USGS Science⌕ Search

Geology topics

Research about Kern County, California

Source-linked reports with geographic coverage including Kern County, California.

At least 19 recordsLinked to original sources
USGS2026

Hydrogeology, groundwater salinity distributions, and assessment of the effect of oil-production activities on groundwater in the Midway Valley area, western Kern County, San Joaquin Valley, California

This study seeks to determine the effects of oil field produced water disposal operations and well mechanical integrity issues on groundwater quality in oil fields in the southwest San Joaquin Valley, California. Whereas previous studies used groundwater wells to study shallow aquifers outside the oil fields, this study demonstrates that future approaches may use oil well geophysical logs to map groundwater head gradients, create salinity profiles and document changes in salinity over time in oil field areas with sparse groundwater well data and at depths greater than 330 m. We also incorporate an analysis of well histories to determine potential effects of compromised wellbore seals on changes in aquifer quality that cannot be explained by water disposal practices. Water quality in the aquifers is naturally brackish across most of the area, with better quality groundwater occurring in the eastern part. Geophysical logs are used to determine salinity variations within aquifers including the depth at which TDS exceeds 10,000 mg/L. This depth ranges from 366 m in the northwest to approximately 1,500 m in the southeast. Oil well porosity logs are used to determine water table elevations. These logs indicate the water table slopes south-southeast, showing the predominant groundwater flow direction is from oil field disposal areas toward better quality groundwater east of the oil fields. Geophysical logs show formation resistivity near some disposal facilities has decreased over time, indicating the salinity of the aquifer has increased due to disposal of saline produced water in injection wells and ponds. Oil well history analysis suggests that increased salinity over time in water-saturated sand intervals >1.5 km from disposal facilities may be caused by mechanical failures and/or incomplete borehole seals in poorly constructed or abandoned wellbores prevalent throughout the study area—particularly wells drilled prior to 1930.

California↗
USGS2023

Multiple-well monitoring site adjacent to the Elk Hills Oil Field, Kern County, California

Introduction The Elk Hills Oil Field is one of the many fields selected for regional groundwater mapping and monitoring by the California State Water Resources Control Board as part of the Oil and Gas Regional Monitoring Program (California State Water Resources Control Board, 2015, 2022b; U.S. Geological Survey, 2022a). The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating groundwater resources near areas of oil and gas development in California, including (1) the location of groundwater resources near oil fields; (2) the proximity of oil and gas operations to groundwater, and the geologic materials between them; (3) evidence (or lack of evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2022a). As part of this evaluation, the USGS installed a multiple-well monitoring site near the administrative boundary of the Elk Hills Oil Field in the southern San Joaquin Valley about 6 miles northeast of Taft, California (California Department of Water Resources, 2020; fig. 1). Data collected at the Elk Hills multiple-well monitoring site (ELKH) provide information about the geology, hydrology, geophysical properties, and water quality of the aquifer system, thus enhancing the understanding of relations between adjacent groundwater and the Elk Hills Oil Field in an area where groundwater data are limited, particularly at different depths in the aquifer. This report presents construction information for the ELKH and initial geohydrologic data collected from the site. Similar sites installed on the east side of the Lost Hills Oil Field, on the east side of the North and South Belridge Oil Fields, and within the Poso Creek Oil Field were described by Everett and others (2020a, b, 2023).

California↗
USGS2023

Seismic images and subsurface structures of northeastern Edwards Air Force Base, Kern County, California

We used multi-component seismic data (including two-dimensional images of compressional-wave velocity [ v P ], shear-wave velocity [ v S ], the ratio of compressional-wave velocity to shear-wave velocity [ v P / v S ratio], Poisson’s ratio [ μ ], and seismic reflections) along a transect across northeastern Edwards Air Force Base to investigate the upper few hundred meters of the subsurface. The shallow subsurface there is characterized by unconsolidated sediments ( v P of less than 2,500 meters per second [m/s]; v S of less than 1,500 m/s) in the upper 40 meters (m), underlain by weathered granitic basement rock ( v P of 2,500–4,000 m/s; v S of 1,500–2,700 m/s) to about 100 m depth and unweathered granitic basement rock ( v P of 4,000–6,000 m/s; v S of 2,700–4,000 m/s). The depth to basement rock varies laterally along the transect by as many as tens of meters. The top of groundwater, as indicated by both the 1,500-m/s v P contour and measurements in five wells along the transect, is located 8–30 m below the surface. In places, the top of groundwater is vertically offset over short lateral distances, likely the result of fault barriers. Faults mapped at the surface along the northeastern part of the transect correlate with multiple seismic indicators of faulting at the same locations. These same indicators show evidence for faulting in several other places along the transect beneath the alluvium. A major zone of faulting is apparent near the center of the seismic profile and is characterized by offsets in the top of groundwater; diffractions on the reflection image; a near-vertical zone of low v S ; a corresponding near-vertical, shallow-depth zone of high v P relative to adjacent rocks (indicating high saturation); a near-vertical zone of high v P / v S ratios; and a near-vertical zone of high Poisson’s ratios (also indicating saturation). Many of these anomalies extend at least 400 m deep, reaching into granitic basement rock and indicating that the fault zone is water-saturated to those depths. There is likely vertical flow of contaminants along these fault zones, which are apparently barriers to the lateral flow of groundwater. The major central fault zone marks a boundary beyond which contaminant flow is apparently impeded. Along the southwestern part of the transect, there are also areas with similar indicators of faulting, but these appear to be smaller fault zones.

California↗
USGS2023

Multiple-well monitoring site within the Poso Creek Oil Field, Kern County, California

Introduction The Poso Creek Oil Field is one of the many fields selected for regional groundwater mapping and monitoring by the California State Water Resources Control Board as part of the Oil and Gas Regional Monitoring Program (RMP; California State Water Resources Control Board, 2015, 2022b; U.S. Geological Survey, 2022a). The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations to groundwater and the geologic materials between them; (3) evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2022a). As part of this evaluation, the USGS installed a multiple-well monitoring site within the administrative boundary of the Poso Creek Oil Field about 12 miles north of Bakersfield, California (fig. 1). Data collected at the Poso Creek multiple-well monitoring site (PCCT) provide information about the geology, hydrology, geophysical properties, and water quality of the aquifer system overlying the oil-bearing zone, thus enhancing understanding of relations between adjacent groundwater and the Poso Creek Oil Field in an area where groundwater data are limited, particularly at different depths in the aquifer. This report presents construction information for the PCCT and initial geohydrologic data collected from the site. Similar sites installed on the east side of the Lost Hills Oil Field and North and South Belridge Oil Fields were described by Everett and others (2020a, b).

California↗
USGS2021

Stratigraphic and structural controls on groundwater salinity variations in the Poso Creek Oil Field, Kern County, California, USA

Groundwater total dissolved solids (TDS) distribution was mapped with a three-dimensional (3D) model, and it was found that TDS variability is largely controlled by stratigraphy and geologic structure. General TDS patterns in the San Joaquin Valley of California (USA) are attributed to predominantly connate water composition and large-scale recharge from the adjacent Sierra Nevada. However, in smaller areas, stratigraphy and faulting play an important role in controlling TDS. Here, the relationship of stratigraphy and structure to TDS concentration was examined at Poso Creek Oil Field, Kern County, California. The TDS model was constructed using produced water TDS samples and borehole geophysics. The model was used to predict TDS concentration at discrete locations in 3D space and used a Gaussian process to interpolate TDS over a volume. In the overlying aquifer, TDS is typically <1,000 mg/L and increases with depth to ~1,200–3,500 mg/L in the hydrocarbon zone below the Macoma claystone—a regionally extensive, fine-grained unit—and reaches ~7,000 mg/L in isolated places. The Macoma claystone creates a vertical TDS gradient in the west where it is thickest, but control decreases to the east where it pinches out and allows freshwater recharge. Previously mapped normal faults were found to exhibit inconsistent control on TDS. In one case, high-density faulting appears to prevent recharge from flushing higher-TDS connate water. Elsewhere, the high-throw segments of a normal fault exhibit variable behavior, in places blocking lower-TDS recharge and in other cases allowing flushing. Importantly, faults apparently have differential control on oil and groundwater.

California↗
USGS2021

Investigating the effect of enhanced oil recovery on the noble gas signature of casing gases and produced waters from selected California oil fields

In regions where water resources are scarce and in high demand, it is important to safeguard against contamination of groundwater aquifers by oil-field fluids (water, gas, oil). In this context, the geochemical characterisation of these fluids is critical so that anthropogenic contaminants can be readily identified. The first step is characterising pre-development geochemical fluid signatures (i.e., those unmodified by hydrocarbon resource development) and understanding how these signatures may have been perturbed by resource production, particularly in the context of enhanced oil recovery (EOR) techniques. Here, we present noble gas isotope data in fluids produced from oil wells in several water-stressed regions in California, USA, where EOR is prevalent. In oil-field systems, only casing gases are typically collected and measured for their noble gas compositions, even when oil and/or water phases are present, due to the relative ease of gas analyses. However, this approach relies on a number of assumptions (e.g., equilibrium between phases, water-to-oil ratio (WOR) and gas-to-oil ratio (GOR) in order to reconstruct the multiphase subsurface compositions. Here, we adopt a novel, more rigorous approach, and measure noble gases in both casing gas and produced fluid (oil-water-gas mixtures) samples from the Lost Hills, Fruitvale, North and South Belridge (San Joaquin Basin, SJB) and Orcutt (Santa Maria Basin) Oil Fields. Using this method, we are able to fully characterise the distribution of noble gases within a multiphase hydrocarbon system. We find that measured concentrations in the casing gases agree with those in the gas phase in the produced fluids and thus the two sample types can be used essentially interchangeably. EOR signatures can readily be identified by their distinct air-derived noble gas elemental ratios (e.g., 20 Ne/ 36 Ar), which are elevated compared to pre-development oil-field fluids, and conspicuously trend towards air values with respect to elemental ratios and overall concentrations. We reconstruct reservoir 20 Ne/ 36 Ar values using both casing gas and produced fluids and show that noble gas ratios in the reservoir are strongly correlated (r 2 = 0.88–0.98) to the amount of water injected within ~500 m of a well. We suggest that the 20 Ne/ 36 Ar increase resulting from injection is sensitive to the volume of fluid interacting with the injectate, the effective water-to-oil ratio, and the composition of the injectate. Defining both the pre-development and injection-modified hydrocarbon reservoir compositions are crucial for distinguishing the sources of hydrocarbons observed in proximal groundwaters, and for quantifying the transport mechanisms controlling this occurrence.

California↗
USGS2020

Multiple-well monitoring site adjacent to the North and South Belridge Oil Fields, Kern County, California

The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations to groundwater and the geologic materials between them; (3) evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2017). As part of this evaluation, the USGS installed a multiple-well monitoring site in the southern San Joaquin Valley groundwater basin adjacent to the North and South Belridge oil fields, about 7 miles southwest of Lost Hills, California. Data collected at the Belridge multiple-well monitoring site (BWSD) provide information about the geology, hydrology, geophysical properties, and geochemistry of the aquifer system, thus enhancing understanding of relations between adjacent groundwater and the North and South Belridge oil fields in an area where there are few groundwater data. This report presents construction information for the BWSD and initial hydrogeologic data collected from the site. A similar site installed to the east of the Lost Hills oil field, 11.5 miles to the north of the BWSD site, was described by Everett and others (2020a).

California↗
USGS2020

Multiple-well monitoring site adjacent to the Lost Hills oil field, Kern County, California

The U.S. Geological Survey (USGS), in cooperation with the California State Water Resources Control Board, is evaluating several questions about oil and gas development and groundwater resources in California, including (1) the location of groundwater resources; (2) the proximity of oil and gas operations and groundwater and the geologic materials between them; (3) the location of evidence (or no evidence) of fluids from oil and gas sources in groundwater; and (4) the pathways or processes responsible when fluids from oil and gas sources are present in groundwater (U.S. Geological Survey, 2019). As part of this evaluation, the USGS installed a multiple-well monitoring site in the southern San Joaquin Valley near Lost Hills, California, adjacent to the Lost Hills oil field. Data collected at the Lost Hills multiple-well monitoring site (LHSP) provide information about the geology, hydrology, geophysics, and geochemistry of the aquifer system, thus enhancing understanding of relations between adjacent groundwater and the Lost Hills oil field in an area where there is little groundwater data. This report presents construction information for the LHSP and initial geohydrologic data collected from the site.

California↗
USGS2020

An uncertain future for a population of desert tortoises experiencing human impacts

We evaluated the status of a population of Mojave Desert Tortoises ( Gopherus agassizii ), a threatened species, in the El Paso Mountains of the northwestern Mojave Desert in California, USA. The study area lies north of and adjacent to a designated critical habitat unit for the species, is adjacent to a state park, and is a short distance from the Desert Tortoise Research Natural Area. We randomly sampled 373 1-ha plots from a 239.1-km 2 area in the mountain range to determine demographic attributes of the population, vegetation associations, predator presence, and human uses. Live and dead G. agassizii and sign (burrows, scats, tracks) occurred on 35.7% of plots. Densities of adults were higher than in adjacent critical habitat, and threats (traumatic injuries, infectious and other diseases) were similar to those reported elsewhere in the geographic range. Signs of human use were evident on 98.4% of plots. We used a multimodel approach to determine distribution of G. agassizii in relation to vegetation, anthropogenic, and predator variables. Vegetation, predators, trash, mining activity, and vehicles were important factors affecting the distribution and intensity of tortoise sign. We concluded that this population is in a downward trend, like other populations in the western Mojave Desert. The high death rate of adults, low population density, high human visitor use, and ongoing decline in the adjacent critical habitat unit indicate that a viable population is unlikely to persist in the study area. The future for the population found in the El Paso Mountains might depend on survival in the adjacent roadless El Paso Mountains Wilderness Area.

California↗
USGS2019

Groundwater salinity and the effects of produced water disposal in the Lost Hills-Belridge oilfields, Kern County, California

Increased oil and gas production in many areas has led to concerns over the effects these activities may be having on nearby groundwater quality. In this study we determine the lateral and vertical extent of groundwater with less than 10,000 milligrams per liter (mg/l) total dissolved solids (TDS) near the Lost Hills-Belridge oilfields in northwestern Kern County, California and document evidence of impacts by produced water disposal within the Tulare aquifer and overlying alluvium—the primary protected aquifers in the area. The depth at which groundwater salinity surpasses 10,000 mg/l ranges from 150 m (500 ft [ft]) in the northwestern part of the study area to 490 to 550 m (1,600-1,800 ft) in the south and east respectively as determined by geophysical log analysis and lab analysis of produced water samples. Comparison of logs from replacement wells with logs from their older counterparts shows relatively higher resistivity intervals representing the vadose zone or fresher groundwater being replaced by intervals with much lower resistivity due to infiltration of brines from surface disposal ponds and injection of brines into disposal wells. The effect of the surface ponds is confined to the alluvial aquifer—the underlying Tulare aquifer is largely protected by a regional clay layer at the base of the alluvium. Sand layers affected by injection of produced waters in nearby disposal wells often exhibit log resistivity profiles that change from high resistivity in their upper parts to low resistivity near the base due to stratification by gravity segregation of the denser brines within each affected sand. The effects of produced water injection are mainly evident within the Tulare Formation and can be noted as far as 550 m (1,800 ft) from the main group of disposal wells located along the east flank of South Belridge.

California↗
USGS2018

Groundwater salinity mapping using geophysical log analysis within the Fruitvale and Rosedale Ranch oil fields, Kern County, California, USA

A method is presented for deriving a volume model of groundwater total dissolved solids (TDS) from borehole geophysical and aqueous geochemical measurements. While previous TDS mapping techniques have proved useful in the hydrogeologic setting in which they were developed, they may yield poor results in settings with lithological heterogeneity, complex water chemistry, or limited data. Problems arise because of assumed values for empirical constants in Archie’s Equation, unrealistic porosity and temperature gradients, or bicarbonate-rich groundwater. These issues become critical in complex geologic settings such as the San Joaquin Valley of California, USA. To address this, a method to map TDS in three dimensions is applied to the Fruitvale and Rosedale Ranch oil fields near Bakersfield, California. Borehole resistivity, porosity, and temperature data are used to derive TDS using Archie’s Equation, and are then kriged to interpolate TDS. Archie’s a and m (tortuosity factor and cementation exponent, respectively) are found by comparing model predictions, after kriging, to TDS measurements, and minimizing the differences via mathematical optimization. Contributions of abundant bicarbonate ions to TDS were corrected using an empirical model. This work was motivated by federal and state law requirements to monitor and protect underground sources of drinking water. Modeling shows the legally significant boundary of 10,000 ppm TDS is at ~1,067 m below sea level in Rosedale Ranch, and deepens into Fruitvale to ~1,341 m. Mapping groundwater TDS at this resolution reveals that TDS is primarily controlled by depth, recharge, stratigraphy, and in some places, by faulting and facies changes.

California↗
USGS2018

The 1952 Kern County, California earthquake: A case study of issues in the analysis of historical intensity data for estimation of source parameters

Seismic intensity data based on first-hand accounts of shaking give valuable insight into historical and early instrumental earthquakes. Comparing an observed intensity distribution to intensity-prediction models based on modern calibration events allows the magnitude to be estimated for many historic earthquakes. Magnitude estimates can also potentially be refined for earthquakes for which limited instrumental data are available. However, the complicated nature of macroseismic data and the methods used to collect and interpret the data introduce significant uncertainties. In this paper, we illustrate these challenges and possible solutions using the 1952 Kern County, California, earthquake as a case study. Published estimates of its magnitude vary from M W 7.2–7.5, making it possibly the second largest in California during the 20th century. We considered over 1100 first-hand reports of shaking, supplemented with other data, and inferred the magnitude in several ways using intensity prediction equations, yielding a preferred intensity magnitude M I 7.2 ± 0.2, where the uncertainty reflects our judgement. The revised intensity distribution reveals stronger shaking on the hanging wall, south of the surface expression of the White Wolf fault, than on the footwall. Characterizing the magnitude and shaking distribution of this early instrumental earthquake can help improve estimation of the seismic hazard of the region. Such reinterpreted intensities for historic earthquakes, combined with U.S. Geological Survey (USGS) Did You Feel It? data for more recent events, can be used to produce a uniform shaking dataset with which earthquake hazard map performance can be assessed.

California↗
USGS2017

Was the Mw 7.5 1952 Kern County, California, earthquake induced (or triggered)?

Several recent studies have presented evidence that significant induced earthquakes occurred in a number of oil-producing regions during the early and mid-twentieth century related to either production or wastewater injection. We consider whether the 21 July 1952 M w 7.5 Kern County earthquake might have been induced by production in the Wheeler Ridge oil field. The mainshock, which was not preceded by any significant foreshocks, occurred 98 days after the initial production of oil in Eocene strata at depths reaching 3 km, within ~1 km of the White Wolf fault (WWF). Based on this spatial and temporal proximity, we explore a potential causal relationship between the earthquake and oil production. While production would have normally be expected to have reduced pore pressure, inhibiting failure on the WWF, we present an analytical model based on industry stratigraphic data and best estimates of parameters whereby an impermeable splay fault adjacent to the main WWF could plausibly have blocked direct pore pressure effects, allowing the poroelastic stress change associated with production to destabilize the WWF, promoting initial failure. This proof-of-concept model can also account for the 98-day delay between the onset of production and the earthquake. While the earthquake clearly released stored tectonic stress, any initial perturbation on or near a major fault system can trigger a larger rupture. Our proposed mechanism provides an explanation for why significant earthquakes are not commonly induced by production in proximity to major faults.

California↗
USGS2015

Desert tortoises ( Gopherus agassizii ) are selective herbivores that track the flowering phenology of their preferred food plants

Previous studies of desert tortoise foraging ecology in the western Mojave Desert suggest that these animals are selective herbivores, which alter their diet according to the temporal availability of preferred food plants. These studies, however, did not estimate availability of potential food plants by taking into account the spatial and temporal variability in ephemeral plant abundance that occurs within the spring season. In this study, we observed 18 free-ranging adult tortoises take 35,388 bites during the spring foraging season. We also estimated the relative abundance of potential food plants by stratifying our sampling across different phenological periods of the 3-month long spring season and by different habitats and microhabitats. This methodology allowed us to conduct statistical tests comparing tortoise diet against plant abundance. Our results show that tortoises choose food plants non-randomly throughout the foraging season, a finding that corroborates the hypothesis that desert tortoises rely on key plants during different phenological periods of spring. Moreover, tortoises only consumed plants in a succulent state until the last few weeks of spring, at which time most annuals and herbaceous perennials had dried and most tortoises had ceased foraging. Many species of food plants&mdash;including several frequently eaten species&mdash;were not detected in our plant surveys, yet tortoises located these rare plants in their home ranges. Over 50% of bites consumed were in the group of undetected species. Interestingly, tortoises focused heavily on several leguminous species, which could be nutritious foods owing to their presumably high nitrogen contents. We suggest that herbaceous perennials, which were rare on our study area but represented ~30% of tortoise diet, may be important in sustaining tortoise populations during droughts when native annuals are absent. These findings highlight the vulnerability of desert tortoises to climate change if such changes alter the availability of their preferred food plants.

California↗
USGS2014

Protection benefits desert tortoise ( Gopherus agassizii ) abundance: the influence of three management strategies on a threatened species

We surveyed an area of &sim;260 km 2 in the western Mojave Desert to evaluate relationships between condition of Agassiz's Desert Tortoise populations ( Gopherus agassizii ) and habitat on lands that have experienced three different levels of management and protection. We established 240 1-ha plots using random sampling, with 80 plots on each of the three types of managed lands. We conducted surveys in spring 2011 and collected data on live tortoises, shell-skeletal remains, other signs of tortoises, perennial vegetation, predators, and evidence of human use. Throughout the study area and regardless of management area, tortoise abundance was positively associated with one of the more diverse associations of perennial vegetation. The management area with the longest history of protection, a fence, and legal exclusion of livestock and vehicles had significantly more live tortoises and lower death rates than the other two areas. Tortoise presence and abundance in this protected area had no significant positive or negative associations with predators or human-related impacts. In contrast, the management area with a more recent exclusion of livestock, limited vehicular traffic, and with a recent, partial fence had lower tortoise densities and high death rates. Tortoise abundance here was negatively associated with vehicle tracks and positively associated with mammalian predators and debris from firearms. The management area with the least protection&mdash;unfenced, with uncontrolled vehicle use, sheep grazing, and high trash counts&mdash;also had low tortoise densities and high death rates. Tortoise abundance was negatively associated with sheep grazing and positively associated with trash and mammalian predator scat. cat.

California↗
USGS2011

Review of samples of sediments, tailings, and waters adjacent to the Cactus Queen Gold Mine, Kern County, California

The Cactus Queen Mine is located in the western Mojave Desert in Kern County, California. The Cactus Queen gold-silver (Au-Ag) deposit is similar to other Au-Ag deposits hosted in Miocene volcanic rocks that consist of silicic domes and associated flows, pyroclastic rocks, and subvolcanic intrusions. The volcanic rocks were emplaced onto a basement of Mesozoic silicic intrusive rocks. A part of the Cactus Queen Mine is located on Federal land managed by the U.S. Bureau of Land Management (BLM). Staff from the BLM initially sampled the mine area and documented elevated concentrations of arsenic (As) in tailings and sediment. BLM then requested that the U.S. Geological Survey (USGS), in collaboration with Chapman University, measure and characterize As and other geochemical constituents in sediment, tailings, and waters on the part of the mine on Federal lands. This report is made in response to the request by the BLM, the lead agency mandated to conduct a Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) - Removal Site Investigation (RSI). The RSI applies to the potential removal of As-contaminated mine waste from the Cactus Queen Mine as a means of reducing As release and exposure to humans and biota. This report summarizes data obtained from field sampling of sediments, mine tailings, and surface waters at the Cactus Queen Mine on January 27, 2008. Our results provide a preliminary assessment of the sources of As and associated chemical constituents that could potentially impact humans and biota.

California↗
USGS1997

Geodetic measurements of horizontal strain near the White Wolf fault, Kern County, California, 1926-1993

The White Wolf fault, located north of the Big Bend segment of the San Andreas fault, is the NE‐SW trending, left lateral‐oblique reverse fault responsible for the M s =7.8 1952 Kern County earthquake. We combined Global Positioning System (GPS) measurements with historical triangulation and trilateration data to determine changes in the strain rate over 7 decades (1926–1993). We reanalyzed the historical geodetic data and calculated an elevated preseismic (1926–1952) maximum shear strain rate of 0.62±0.16 μstrain/yr across the White Wolf fault. The maximum shear strain rate decreased with distance toward the Garlock fault to 0.09±0.08 μstrain/yr. In the decade following the earthquake (1952–1963), the near fault was high (0.85±0.23μstrain/yr), and decreased to 0.23±0.13 μstrain/yr across the Garlock fault. In 1993, we resurveyed many of the same monuments with GPS receivers to estimate fault‐crossing and off‐fault strain rates for the preceding 30 years. Across the White Wolf fault, the maximum shear strain rate dropped to 0.19±0.07 μstrain/yr. The azimuths of the maximum principal strain rates (ϕ) for the 1963–1993 epoch rotate from a fault normal orientation (−57°±15°) across the White Wolf fault to 11°±3°E across the Garlock fault.

California↗