USGS Science⌕ Search

Geology topics

Research about Kentucky River basin

Source-linked reports with geographic coverage including Kentucky River basin.

6 recordsLinked to original sources

Water-quality assessment of the Kentucky River basin, Kentucky: Nutrients, sediments, and pesticides in streams, 1987-90

The U.S. Geological Survey investigated the water quality of the Kentucky River Basin in Kentucky as part of the National Water Quality Assessment program. Data collected during 1987-90 were used to describe the spatial and temporal variability of nutrients, suspended sediment, and pesticides in streams. Concentrations of phosphorus were signifi- cantly correlated with urban and agricultural land use. The high phosphorus content of Bluegrass Region soils was an important source of phosphorus in streams. At many sites in urban areas, all of the stream nitrogen load was attributable to wastewater- treatment-plant effluent. Tributary streams affected by agricultural sources of nutrients contained higher densities of phytoplankton than streams that drained forested areas. Data indicate that a consid- erable percentage of total nitrogen was transported as algal biomass during periods of low discharge. Average suspended-sediment concentrations for the study period were positively correlated with dis- charge. There was a downward trend in suspended- sediment concentrations downstream in the Kentucky River main stem during the study. Although a large amount of suspended sediment originates in the Eastern Coal Field Region, contributions of suspended sediment from the Red River and other tributary streams of the Knobs Region also are important. The most frequently detected herbicides in water samples were atrazine, 2,4-D, alachlor, metolachlor, and dicamba. Diazinon, malathion, and parathion were the most frequently detected organo- phosphate insecticides in water samples. Detectable concentrations of aldrin, chlordane, DDT, DDE, dieldrin, endrin, endosulfan, heptachlor, heptachlor epoxide, and lindane were found in streambed- sediment samples.

Kentucky↗

Water-quality assessment of the Kentucky River Basin, Kentucky: Results of investigations of surface-water quality, 1987-90

The U.S. Geological Survey investigated the water quality of the Kentucky River Basin in Kentucky as part of the National Water-Quality Assessment program. Data collected during 1987-90 were used to describe the spatial and temporal variability of water-quality constituents including metals and trace elements, nutrients, sediments, pesticides, dissolved oxygen, and fecal-coliform bacteria. Oil-production activities were the source of barium, bromide, chloride, magnesium, and sodium in several watersheds. High concentrations of aluminum, iron, and zinc were related to surface mining in the Eastern Coal Field Region. High concentrations of lead and zinc occurred in streambed sediments in urban areas, whereas concentrations of arsenic, strontium, and uranium were associated with natural geologic sources. Concentrations of phosphorus were significantly correlated with urban and agricultural land use. The high phosphorus content of Bluegrass Region soils was an important source of phosphorus in streams. At many sites in urban areas, most of the stream nitrogen load was attributable to wastewater-treatment-plant effluent. Average suspended-sediment concentrations were positively correlated with discharge. There was a downward trend in suspended-sediment concentrations downstream in the Kentucky River main stem during the study. The most frequently detected herbicides in water samples were atrazine, 2,4-D, alachlor, metolachlor, and dicamba. Diazinon, malathion, and parathion were the most frequently detected organophosphate insecticides in water samples. Detectable concentrations of aldrin, chlordane, DDT, DDE, dieldrin, endrin, endosulfan, heptachlor, and lindane were found in streambed-sediment samples. Dissolved-oxygen concentrations were sometimes below the minimum concentration needed to sustain aquatic life. At some sites, high concentrations of fecal-indicator bacteria were found and water samples did not meet sanitary water-quality criteria.

Kentucky↗

Water-quality assessment of the Kentucky River Basin, Kentucky; analysis of available surface-water-quality data through 1986, with a section on biological indicators of water quality

As part of the National Water-Quality Assessment program (NAWQA), existing water-quality data and ancillary information from the Kentucky River basin study unit were compiled and evaluated to provide a description of existing conditions and long-term trends in water quality. The data and evaluations were used to develop a conceptual understanding of the observed conditions and trends, including relations to causative factors, both natural and human controlled.

Kentucky↗

Surface water-quality assessment of the Kentucky River basin, Kentucky: Project description

In April 1986, the U.S. Geological Survey began the National Water Quality Assessment Program, which at present (1987) is in a pilot phase in which assessment concepts and approaches are being tested and modified to prepare for full implementation of the program in the future. Seven pilot projects (four surface water projects and three groundwater projects) have been started. The preliminary plans for the surface water quality assessment of the Kentucky River basin pilot project are described. The Kentucky River basin drains an area of approximately 7,000 sq mi in east central Kentucky and is underlain by rocks that range in composition from limestone to sandstone and shale. Because greater than 95% of the basin population relies on surface water, surface water quality is of great concern. Land use practices that affect the surface water quality in the basin include agriculture, forestry, oil and gas production, coal mining, and urbanization. Water quality concerns resulting from the various land uses include the effects of: oil and gas field brine discharges; agricultural chemicals; sedimentation caused by coal mining; and trace element impacts from industrial and urban environments. Assessment activity is designed to occur over a 9-year period of time. During the first 3-year period of the cycle, concentrated data acquisition and interpretation will occur. For the next 6 years, sample collection will occur at a much lower level of intensity to document the occurrence of any gross changes in water quality. This 9-year cycle will then be repeated. Historical data will be evaluated to provide, to the extent possible, a description of existing and past trends in water quality conditions and to develop conceptual models that relate the observed conditions to the sources and causes, both natural and human-controlled. New data will be collected to verify the water quality conditions documented by historic data, to track long-term trends in water quality, to intensify temporal and spatial sampling densities, and to improve the understanding of the relations between water quality conditions and causative factors. (Lantz-PTT)

Kentucky↗