Research about Kankakee River basin

USGS2023

Comparison of turbidity sensors at U.S. Geological Survey supergages in Indiana from November 2018 to December 2021

Beginning in September 2010, the U.S. Geological Survey installed continuous water-quality monitors at several streamgages across Indiana as part of a network of supergages to meet cooperator information needs. Two types (or models) of water-quality monitors deployed at each site measured and recorded water temperature, dissolved oxygen, specific conductance, pH, and turbidity every 15 minutes during the study period. Associated discrete water samples were collected at regular intervals and analyzed for concentrations of suspended sediment and total phosphorus. Surrogate regression models were developed between the continuously measured turbidity values and turbidity values in the associated samples to compute continuous concentrations and loads of suspended sediment and total phosphorus. Starting in November 2018, the original extended deployment system monitors were replaced with the newest model of multiparameter water-quality monitors and were equipped with turbidity smart sensors because the older monitors were phased out of production. The updated monitor and smart sensor yield different but relatable turbidity values. Turbidity data collected concurrently by the two sensors from November 2018 to December 2021 were compared and analyzed to quantify the relation between them at six supergage sites in northwestern Indiana and one site in the town of Zionsville in central Indiana. Ordinary least squares regression was used to calculate site-specific conversion factors so that turbidity data from the newer monitors can be used in published surrogate models based on the older monitor data. Regression analyses explained approximately 98 percent of the variation in turbidity readings between the two sensors. From these analyses, conversion factors were developed that may be applied to older turbidity readings to calculate near real-time concentrations of phosphorus and suspended sediment.

Indiana↗

USGS1980

Water-quality assessment of the Porter County watershed, Kankakee River basin, Porter County, Indiana

Water type in the 241-square mile Porter County watershed in Indiana, was calcium bicarbonate or mixed calcium bicarbonate and calcium sulfate. Concentrations of dissolved chemical constituents in surface water and contents of chlorinated hydrocarbons in streambed samples in the watershed were generally less than water-quality alert limits set by the U.S. Environmental Protection Agency, except in Crooked Creek. During sampling, this stream was affected by sewage, chlorinated hydrocarbons, and two chemical spills. Ranges of on-site field measurements were: specific conductance, from 102 to 1,060 micromhos per centimeter at 25 Celcius; water temperature, from 7.0 to 31.8 Celsius; pH, from 6.8 to 8.9; dissolved oxygen, from 2.5 to 14.9 milligrams per liter and from 27 to 148% saturation; and instantaneous discharge from 0 to 101 cubic feet per second. Concentrations of most dissolved-inorganic constituents (heavy metals and major ions) and dissolved solids did not vary significantly from one sampling period to the next at each site. Dissolved constituents whose concentrations varied significantly were iron, manganese, organic carbon, ammonia, nitrate plus nitrite, organic nitrogen, Kjeldahl nitrogen, and phosphorus. Concentrations of dissolved manganese, organic carbon, dissolved nitrite plus nitrate, and suspended sediment varied seasonally at most sites. Populations and identification of bacteria, phytoplankton, periphyton, and benthic invertebrates indicate a well-balanced environment at most sites, except in Crooked Creek.

Indiana↗