USGS Science⌕ Search

Geology topics

Research about Idaho

Source-linked reports with geographic coverage including Idaho.

At least 919 records · Page 51Linked to original sources
USGS1975

Stratigraphy, conodont dating, and paleotectonic interpretation of the type Milligen Formation (Devonian), Wood River area, Idaho

The Milligen Formation at and near its type locality in the Wood River area is considerably older than and unrelated to rocks of Early Mississippian age called Milligen Formation in the Lost River Range and other ranges of east-central Idaho. Conodont faunas were found in limestones of a thin upper member of the sparsely fossiliferous marine Milligen Formation in its principal reference section at Milligen Gulch, at Fisher Canyon, and near Bellevue, Idaho. The faunas include indigenous conodonts here assigned to the early Late Devonian (early Frasnian) Lower and Middle Polygnathus asymmetricus Zones, and reworked conodonts derived from several Middle and Early Devonian conodont zones. An underlying much thicker argillite member of the Milligen contains fewer limestones, but a thin encrinite interbed near the middle of the member yielded early Middle Devonian (Eifelian) conodonts. This lower member probably represents most of Middle and Early Devonian time. Although its base is nowhere exposed in the Wood River area, the Milligen is inferred to have been deposited on the Silurian Trail Creek Formation, which crops out just to the east in the Pioneer Mountains. The age of the Milligen is therefore wholly Devonian and the highest fossiliferous beds are no younger than early Late Devonian. Reworked Middle and Early Devonian conodonts in limestone turbidites of the upper member of the Milligen Formation are identical to conodonts found in shelf (miogeosynclinal) carbonate rocks farther east. A postulated eastern source for the turbidites is supported by new data on the distribution, thickness, and tectonic facies of Devonian rocks that suggest the presence of a Late Devonian ridge on the continental shelf east of the Milligen depositional area. The Milligen Formation was intensely folded and was emergent during most of the Mississippian time when it formed part of the Antler Highlands, which shed flysch sediments eastward into the Copper basin. The Wood River Formation of Pennsylvanian and Permian age was then deposited over a subdued topography on the Milligen Formation. The Hailey Conglomerate Member at the base of the Wood River filled many irregularities in the surface. This depositional contact later was largely destroyed and the contact between the Milligen and Wood River is now a regional thrust fault at most places.

Idaho↗
USGS1974

Hydrologic Unit Map -- 1974, Idaho

This map and accompanying table show Hydrologic Units that are basically hydrographic in nature. The Cataloging Units shown will supplant the Cataloging Units previously used by the U.S. Geological Survey in its Catalog of Information on Water Data (1966-72). The previous U.S. Geological Survey Catalog-Indexing System was by map number and letter, such as 49M. The boundaries as shown have been adapted from "The Catalog of Information on Water Data" (1972), "Water Resources Regions and Subregions for the National Assessment of Water and Related Land Resources" by the U.S. Water Resources Council (1970), "River Basins of the United States" by the U.S. Soil Conservation Service (1963, 1970), "River Basin Maps Showing Hydrologic Stations" by the Inter-Agency Committee on Water Resources, Subcommittee on Hydrology (1961), and State planning maps.

Idaho↗
USGS1974

Digital modeling of radioactive and chemical waste transport in the Snake River plain aquifer at the National Reactor Testing Station, Idaho

Industrial and low-level radioactive liquid wastes at the National Reactor Testing Station (NRTS) in Idaho have been disposed to the Snake River Plain aquifer since 1952. Monitoring studies have indicated that tritium and chloride have dispersed over a 15-square mile (39-square kilometer) area of the aquifer in low but detectable concentrations and have only migrated as far as 5 miles (8 kilometers) downgradient from discharge points. The movement of cationic waste solutes, particularly 90 Sr and 137 Cs, has been significantly retarded due to sorption phenomena, principally ion exchange. 137 Cs has shown no detectable migration in the aquifer and 90 Sr has migrated only about 1.5 miles (2 kilometers) from the Idaho Chemical Processing Plant (ICPP) discharge well, and is detectable over an area of only 1.5 square miles ( 4 square kilometers) of the aquifer. Digital modeling techniques have been applied successfully to the analysis of the complex waste-transport system by utilizing numerical solution of the coupled equations of groundwater motion and mass transport. The model includes the effects of convective transport, flow divergence, two-dimensional hydraulic dispersion, radioactive decay, and reversible linear sorption. The hydraulic phase of the model uses the iterative, alternating direction, implicit finite-difference scheme to solve the groundwater flow equations, while the waste-transport phase uses a modified method of characteristics to solve the solute transport equations simulated by the model. The modeling results indicate that hydraulic dispersion (especially transverse) is a much more significant influence than previously suggested by earlier studies. The model has been used to estimate future waste migration patterns for varied assumed hydrological and waste conditions up through the year 2000. The hydraulic effects of recharge from the Big Lost River have an important (but not predominant) influence on the simulated future migration patterns. For the assumed conditions, the model indicates that detectable concentrations of waste chloride and tritium could move as much as 15 miles (24 kilometers) downgradient from the original discharge points by the year 2000. However, the model shows 90 Sr moving only 2 to 3 miles (3 to 5 kilometers) downgradient in the same time. The model may also be used to estimate the effects of the various future waste disposal practices and hydrologic conditions on subsequent migration of waste products.

Idaho↗
USGS1974

Geothermal investigations in Idaho, Part 2, An evaluation of thermal water in the Bruneau-Grand View area, southwest Idaho, with a section on a reconnaissance audio-magnetotelluric survey

The Bruneau-Grand View area occupies about 1,100 square miles in southwest Idaho and is on the southern flank of the large depression (possibly a graben) in which lies the western Snake River Plain. The igneous and sedimentary rocks in the area range in age from Late Cretaceous to Holocene. They are transected by a prominent system of northwest-trending faults. For discussion purposes, the aquifers in the area have been separated into two broad units: (1) the volcanic-rock aquifers, and (2) the overlying sedimentary-rock aquifers. The Idavada Volcanics or underlying rock units probably constitute the reservoir that contains thermal water. An audio-magnetotelluric survey indicates that a large conductive zone having apparent resistivities approaching 2 ohm-metres underlies a part of the area at a relatively shallow depth. Chemical analysis of 94 water samples collected in 1973 show that the thermal waters in the area are of a sodium bicarbonate type. Although dissolved-solids concentrations of water ranged from 181 to 1,100 milligrams per litre (mg/l) in the volcanic-rock aquifers, they were generally less than 500 mg/l. Measured chloride concentrations of water in the volcanic-rock aquifers were less than 20 mg/l. Temperatures of water from wells and springs ranged from 9.5 to 83.0 degrees C. Temperatures of water from the volcanic-rock aquifers ranged from 40.0 to 83.0 degrees C, whereas temperatures of water from the sedimentary-rock aquifers seldom exceeded 35 degrees C. Aquifer temperatures at depth, as estimated by silica and sodium-potassium-calcium geochemical thermometers, probably do not exceed 150 degrees C. However, a mixed-water geochemical thermometer indicates that temperatures at depth may exceed 180 degrees C. The gas in water from the volcanic-rock aquifers is composed chiefly of atmospheric oxygen and nitrogen. Methane gas (probably derived from organic material) was also found in some water from the sedimentary-rock aquifers. The thermal waters in the area are believed to be heated by deep circulation in a zone of high geothermal gradient resulting from thinning of the earth?s crust.

Idaho↗
USGS1974

Posssible extension of mineral belts, northern part of Coeur d'Alene district, Idaho

The ore deposits in the northern part of the Coeur d'Alene district are located within rocks of the Belt Supergroup that have been intruded by Cretaceous quartz monzonites. Lead-zinc-silver replacement veins constitute most of the deposits. The geometry of the district has been modified by post-ore faulting along the Osburn, Dobson Pass, and other faults. The original position of the Gem stocks, before their separation from the Dago Peak stocks by the Dobson Pass fault, can be approximately reconstructed by moving the truncated stocks and associated geochemical dispersion patterns back into matching positions. The known mineral belts are defined by dispersion patterns of both lead and the lead:zinc ratio. Similar dispersion patterns of lead and the lead:zinc ratio northwest of the original position of the Gem stocks suggest that the mineral belts extend into that area.

Idaho↗
USGS1974

Characteristics of streamflow and ground-water conditions in the Boise River Valley, Idaho

The quantity, quality, and distribution in time of streamflow in Boise River below Lucky Peak Lake are drastically affected by storage reservoirs, diversions for irrigation, and by domestic, industrial, and agricultural wastes. Reservoirs usually fill during the nonirrigation season, and streamflow for several miles below Lucky Peak Lake is very low, sometimes less than 10 cubic feet per second (0.28 cubic meters per second). On November 18-19, 1971, when the gates at Lucky Peak Dam were closed, inflow to the Boise River in the study reach totaled 1010 ft 3 /s. Practically all inflow was discharged ground water. During the growing season, several thousands of ft 3 /s are released from Lucky Peak Lake, but diversions reduce the flows to near zero below some large diversion points in the study reach. Characteristics of streamflow are described by duration curves, duration hydrographs, and low-flow and high-flow frequency curves. Water released from Lucky Peak Lake is of excellent quality. Dissolved solids are usually less than 80 milligrams per liter. Discharged ground water increases the dissolved solids in the river downstream to 400 milligrams per liter or more when dilution from Lucky Peak Lake is slight. Other measures of water quality likewise show the deterioration in a downstream direction in the study reach.

Idaho↗
USGS1974

A progress report on results of test drilling and ground-water investigations of the Snake Plain aquifer, southeastern Idaho: Part 3: Lake Walcott-Bonanza Lake area

Direct-current resistivity soundings and exploratory drilling suggest that the basalt of the Snake River Group is relatively thin in the area along the Snake River that is topographically suitable for pumping large quantities of ground water in exchange for surface water. The formations underlying the Snake River Group appear to have low permeability and probably would not yield large amounts of water. Previous studies have indicated that the southern edge of the Snake Plain aquifer extended to the Snake River. Data presented in this report implies that, in general, the southern boundary should, in fact, be several miles north of the river.

Idaho↗
USGS1974

The availability of water in the Little Lost River Basin, Idaho

The Little Lost River basin, an elongated, northwest trending structurally formed intermontane valley, drains an area of about 900 square miles into a closed depression near the northwestern edge of the Snake River Plain. Runoff from snowmelt and rainfall on the Lost River Range on the west and the Lemhi Range on the east maintains the flow of the Little Lost River, and recharges the ground-water reservoir, Both mountain ranges are complexly faulted and are underlain by a variety of rocks, dominantly limestone, of Paleozoic age The principal aquifers are highly transmissive alluvial fill in the middle and upper valley and alluvial fill interfingered with basalt in the southernmost part of the valley.

Idaho↗
USGS1974

Distribution and occurrence of rare earths in the thorium veins on Hall Mountain, Idaho

Rare earths, although equal to or more abundant than thorium in many thorium veins, are much less abundant than thorium in the veins on Hall Mountain, Idaho. Total rare-earth content of these veins ranges from 0.00111 to 0.197 percent in 12 samples from 10 veins; the thoria (ThO 2 ) content, from 0.011 to 5.84 percent. The rare-earth oxide to thoria ratios range from 0.0019 to 3.22. Only two samples contained more rare earths than thorium, and these two samples came from veins related to a fault near the base of a thick sill; the others came from veins near the top of the same sill. The relative amounts of the individual lanthanides are remarkably similar in the Hall Mountain veins, although cerium, gadolinium, or dysprosium are the most abundant in different samples. These veins differ in lanthanide distribution both from the Earth's crust and from the thorium veins of the Lemhi Pass district, Idaho and Montana, in that they contain chiefly yttrium-group rare earths. Most of the rare earths occur in thorite, whose atomic structure will accommodate wide-ranging proportions of the rare earths. Cenosite, one of the few minerals with a high content of the yttrium group of rare earths, was found in one vein.

Idaho↗
USGS1974

Buddingtonite, ammonium feldspar, in the Phosphoria Formation, southeastern Idaho

Buddingtonite is distributed widely in the rocks of the Meade Peak Member of the Phosphoria Formation in southeastern Idaho and occurs in amounts up to about 50 percent. Most of the buddingtonite is in the middle mudstone interval of the member between two phosphate-rich intervals. The composition of the buddingtonite, in terms of a buddingtonite K-feldspar series, shows an apparent range of Bd 82 KF 18 to Bd 13 KF 87 , and compositions of Bd 72 KF 28 to Bd 50 KF 50 may be the most common. The predominant silicate mineral suite consists of buddingtonite-albite-illite. Albite is present in amounts up to about 20 percent. Buddingtonite may have developed directly from volcanic glass in the presence of abundant ammonium, derived from the decomposition of organic matter, in interstitial waters, or it may have formed at some later diagenetic stage from other products of volcanic glass alteration, such as montmorillonite or zeolites.

Idaho↗