Geology topics

Research about Hawaii

Source-linked reports with geographic coverage including Hawaii.

At least 523 records · Page 29Linked to original sources

USGS2015

The importance of scaling for detecting community patterns: success and failure in assemblages of introduced species

Community saturation can help to explain why biological invasions fail. However, previous research has documented inconsistent relationships between failed invasions ( i.e ., an invasive species colonizes but goes extinct) and the number of species present in the invaded community. We use data from bird communities of the Hawaiian island of Oahu, which supports a community of 38 successfully established introduced birds and where 37 species were introduced but went extinct (failed invasions). We develop a modified approach to evaluate the effects of community saturation on invasion failure. Our method accounts (1) for the number of species present (NSP) when the species goes extinct rather than during its introduction; and (2) scaling patterns in bird body mass distributions that accounts for the hierarchical organization of ecosystems and the fact that interaction strength amongst species varies with scale. We found that when using NSP at the time of extinction, NSP was higher for failed introductions as compared to successful introductions, supporting the idea that increasing species richness and putative community saturation mediate invasion resistance. Accounting for scale-specific patterns in body size distributions further improved the relationship between NSP and introduction failure. Results show that a better understanding of invasion outcomes can be obtained when scale-specific community structure is accounted for in the analysis.

Hawaii↗

USGS2015

Seismic source dynamics of gas-piston activity at Kı̄lauea Volcano, Hawai‘i

Since 2008, eruptive activity at the summit of Kı̄lauea Volcano, Hawai‘i has been confined to the new Overlook pit crater within the Halema‘uma‘u Crater. Among the broad range of magmatic processes observed in the new pit are recurring episodes of gas pistoning. The gas-piston activity is accompanied by seismic signals that are recorded by a broadband network deployed in the summit caldera. We use raw data recorded with this network to model the source mechanism of representative gas-piston events in a sequence that occurred on 20–25 August 2011 during a gentle inflation of the Kı̄lauea summit. To determine the source centroid location and source mechanism, we minimize the residual error between data and synthetics calculated by the finite difference method for a point source embedded in a homogeneous medium that takes topography into account. We apply a new waveform inversion method that accounts for the contributions from both translation and tilt in horizontal seismograms through the use of Green's functions representing the seismometer response to translation and tilt ground motions. This method enables a robust description of the source mechanism over the period range 1–10,000 s. Most of the seismic wavefield produced by gas-pistoning originates in a source region ∼1 km below the eastern perimeter of the Halema‘uma‘u pit crater. The observed waveforms are well explained by a simple volumetric source with geometry composed of two intersecting cracks featuring an east striking crack (dike) dipping 80°to the north, intersecting a north striking crack (another dike) dipping 65° to the east. Each gas-piston event is marked by a similar rapid inflation lasting a few minutes, trailed by a slower deflation ramp extending up to 15 min, attributed to the efficient coupling at the source centroid location of the pressure and momentum changes accompanying the growth and collapse of a layer of foam at the top of the lava column. Assuming a simple lumped parameter representation of the shallow magmatic system, the observed pressure and volume variations can be modeled with the following attributes : foam thickness (10–50 m), foam cell diameter (0.04–0.10 m), and gas-injection velocity (0.01–0.06 m s −1 ). Gas-piston activity occurs in a narrow pipe with diameter of 6 m connecting the Halema‘uma‘u pit crater to the subjacent dike system. The height of the magma column is estimated at ∼104 m at the start of the sequence based on the period of very long period (VLP) oscillations accompanying the onset of the gas-piston signal. Based on the change in the period of VLP oscillations and tilt evidence, the height of the magma column is inferred to have risen by up to ∼23 m by the end of the 5 day long sequence. A penny-shaped crack model of the dike geometry yields effective diameters of ∼1.2–2.9 km for the east dike and 0.7 km for the north dike. The shallower north dike segment is embedded in a relatively weak medium, compatible with expected mechanical properties in the hydrothermal environment of this dike.

Hawaii↗

USGS2015

Foraging range movements of the endangered Hawaiian hoary bat, Lasiurus cinereus semotus (Chiroptera: Vespertilionidae)

We documented nightly movements of Hawaiian hoary bats ( Lasiurus cinereus semotus ) on the island of Hawai’i. Based on data from 28 radiotagged individuals mean foraging range (FR) was 230.7±72.3 ha, core-use area (CUA) was 25.5±6.9 ha (or 11.1% of mean FR), and the mean long axis (LAX) across the FR was 3,390.8±754.3 m. There was almost no overlap in CUAs among 4 adult males having overlapping foraging areas and tracked simultaneously or within a 90-day window of each other. CUAs of subadults partially overlapped with multiple adult males or with one other subadult. High variance in FRs, cores use areas, and LAX across the FR perhaps reflect localized stochastic variables such as weather, habitat, and food resources. Hawaiian hoary bats use moderately large FRs among insectivorous bats studied with comparable methodologies; however, foraging activity indicated by documentation of acoustic feeding buzzes is concentrated within one or a few disjunct areas cumulatively forming the 50% fixed kernel of CUA. The concentration of feeding activity, low values of individual overlap, and agonistic chasing behavior within CUAs all demonstrate a structured use of individual space by Hawaiian hoary bats.

Hawaii↗

USGS2015

First record of black band disease in the Hawaiian archipelago: response, outbreak, status, virulence, and a method of treatment

A high number of coral colonies, Montipora spp., with progressive tissue loss were reported from the north shore of Kaua‘i by a member of the Eyes of the Reef volunteer reporting network. The disease has a distinct lesion (semi-circular pattern of tissue loss with an adjacent dark band) that was first observed in Hanalei Bay, Kaua‘i in 2004. The disease, initially termed Montipora banded tissue loss, appeared grossly similar to black band disease (BBD), which affects corals worldwide. Following the initial report, a rapid response was initiated as outlined in Hawai‘i’s rapid response contingency plan to determine outbreak status and investigate the disease. Our study identified the three dominant bacterial constituents indicative of BBD (filamentous cyanobacteria, sulfate-reducing bacteria, sulfide-oxidizing bacteria) in coral disease lesions from Kaua‘i, which provided the first evidence of BBD in the Hawaiian archipelago. A rapid survey at the alleged outbreak site found disease to affect 6-7% of the montiporids, which is higher than a prior prevalence of less than 1% measured on Kaua‘i in 2004, indicative of an epizootic. Tagged colonies with BBD had an average rate of tissue loss of 5.7 cm 2 /day over a two-month period. Treatment of diseased colonies with a double band of marine epoxy, mixed with chlorine powder, effectively reduced colony mortality. Within two months, treated colonies lost an average of 30% less tissue compared to untreated controls.

Hawaii↗

USGS2015

Using near-real-time monitoring data from Pu'u 'Ō'ō vent at Kīlauea Volcano for training and educational purposes

Training non-scientists in the use of volcano-monitoring data is critical preparation in advance of a volcanic crisis, but it is currently unclear which methods are most effective for improving the content-knowledge of non-scientists to help bridge communications between volcano experts and non-experts. We measured knowledge gains for beginning-(introductory-level students) and novice-level learners (students with a basic understanding of geologic concepts) engaged in the Volcanoes Exploration Program: Pu‘u ‘Ō‘ō (VEPP) “Monday Morning Meeting at the Hawaiian Volcano Observatory” classroom activity that incorporates authentic Global Positioning System (GPS), tilt, seismic, and webcam data from the Pu‘u ‘Ō‘ō eruptive vent on Kīlauea Volcano, Hawai‘i (NAGT website, 2010), as a means of exploring methods for effectively advancing non-expert understanding of volcano monitoring. Learner groups consisted of students in introductory and upper-division college geology courses at two different institutions. Changes in their content knowledge and confidence in the use of data were assessed before and after the activity using multiple-choice and open-ended questions. Learning assessments demonstrated that students who took part in the exercise increased their understanding of volcano-monitoring practices and implications, with beginners reaching a novice stage, and novices reaching an advanced level (akin to students who have completed an upper-division university volcanology class). Additionally, participants gained stronger confidence in their ability to understand the data. These findings indicate that training modules like the VEPP: Monday Morning Meeting classroom activity that are designed to prepare non-experts for responding to volcanic activity and interacting with volcano scientists should introduce real monitoring data prior to proceeding with role-paying scenarios that are commonly used in such courses. The learning gains from the combined approach will help improve effective communications between volcano experts and non-experts during times of crisis, thereby reducing the potential for confusion and misinterpretation of data.

Hawaii↗

USGS2015

Episodic deflation-inflation events at Kīlauea Volcano and implications for the shallow magma system

Episodic variations in magma pressures and flow rates at Kīlauea Volcano, defined by a characteristic temporal evolution and termed deflation-inflation (DI) events, have been observed since at least the 1990s. DI events consist of transient, days-long deflations and subsequent reinflations of the summit region, accompanied since 2008 by fluctuations in the surface height of Kīlauea's summit lava lake. After a delay of minutes to hours, these events also often appear along the volcano's East Rift Zone in ground deformation data and as temporary reductions in eruption rate (sometimes followed by brief surges). Notable pauses in DI activity have preceded many eruptive events at Kīlauea. We analyzed more than 500 DI events recorded by borehole tiltmeters at the summit during 2000–2013. Inverse modeling suggests that DI-related ground deformation at the summit is generated by pressure transients in a shallow magma reservoir located beneath the east margin of Halema‘uma‘u Crater and that this reservoir has remained remarkably stable for more than a decade. Utilizing tilt data and variation in the level of the summit lava lake during a large DI event, we estimate a reservoir volume of approximately 1 km 3 (0.2–5.5 km 3 at 95% confidence).

Hawaii↗

USGS2015

Crustal stress and structure at Kīlauea Volcano inferred from seismic anisotropy

Seismic anisotropy, measured through shear wave splitting (SWS) analysis, can be indicative of the state of stress in Earth's crust. Changes in SWS at Kīlauea Volcano, Hawai‘i, associated with the onset of summit eruptive activity in 2008 hint at the potential of the technique for tracking volcanic activity. To use SWS observations as a monitoring tool, however, it is important to understand the cause of seismic anisotropy at the volcano throughout the eruptive cycle. To address this need, we analyzed SWS results from across Kīlauea in combination with macroscopic surface structures (mapped fractures, faults, and fissures) and stress orientations inferred from fault plane solutions. Seismic anisotropy seems to be due to pervasive aligned structures in most regions of the volcano. The upper East and Southwest Rift Zones, however, show a bimodality in stress and SWS, suggesting a stress discontinuity with depth, perhaps related to magma conduits that trend obliquely to the dominant structure. Other areas in and around Kīlauea Caldera display principal stresses of similar magnitudes, indicating that small stress perturbations can rotate the maximum horizontal compressive stress direction by up to 90 ° . In these locations, static structures generally control SWS, but dynamic conditions due to magmatic activity can override the structural control. Monitoring of SWS may therefore provide important signs of impending volcanism.

Hawaii↗

USGS2015

Delicate balance of magmatic-tectonic interaction at Kilauea Volcano, Hawai`i, revealed from slow slip events: Chapter 13

Eleven slow slip events (SSEs) have occurred on the southern flank of Kilauea Volcano, Hawai’i, since 1997 through 2014. We analyze this series of SSEs in the context of Kilauea’s magma system to assess whether or not there are interactions between these tectonic events and eruptive/intrusive activity. Over time, SSEs have increased in magnitude and become more regular, with interevent times averaging 2.44 ± 0.15 years since 2003. Two notable SSEs that impacted both the flank and the magmatic system occurred in 2007, when an intrusion and small eruption on the East Rift Zone were part of a feedback with a SSE and 2012, when slow slip induced 2.5 cm of East Rift Zone opening (but without any change in eruptive activity). A summit inflation event and surge in East Rift Zone lava effusion was associated with a SSE in 2005, but the inferred triggering relation is not clear due to a poorly constrained slip onset time. Our results demonstrate that slow slip along Kilauea’s décollement has the potential to trigger and be triggered by activity within the volcano’s magma system. Since only three of the SSEs have been associated with changes in magmatic activity within the summit and rift zones, both the décollement and magma system must be close to failure for triggering to occur.

Hawaii↗

USGS2015

Reticulite‐producing fountains from ring fractures in Kīlauea Caldera ca. 1500 CE

A widely dispersed reticulite bed occurs close to the base of the Keanakākoʻi Tephra at Kīlauea Volcano. It can be divided into six subunits in the northern sector of the volcano; the reticulite also occurs in the southern sector, but outcrops are sparse owing to penecontemporaneous erosion and burial. Multilobate isopachs for each subunit and the total deposit suggest that multiple fountaining vents were distributed in the northern half of the caldera, possibly along ring fractures for the newly formed caldera. Isopach maps also show a sharp decline in thickness along the dispersal axis of each lobe, which could be explained by remobilization of tephra and/or inclined fountains. Despite such isopach characteristics, thinning rates calculated from the isopach data indicate that the fountains were among the most intense and powerful of all studied Kīlauea fountains. Density analyses of the pyroclasts suggest that fountaining was high (>600m) yet complex, possibly due to lava ponding and reentrainment. The calculated volume of the reticulite deposited around the caldera rim is approximately 0.2km 3 , more voluminous than the deposits of the 1959 Kīlauea Iki eruption; this volume is a minimum, however, as the low-density tephra is easily remobilized, and 600m high caldera walls probably trapped tephra within the caldera, which is deeply buried today and not accounted for in the volume calculations. The duration of this eruption was most likely at least a few days to weeks, based on the calculated volume and estimated discharge rates as seen during the Kīlauea Iki 1959 eruption.

Hawaii↗

USGS2015

Hawaiian fissure fountains: Quantifying vent and shallow conduit geometry, episode 1 of the 1969-1974 Mauna Ulu eruption

Geometries of shallow magmatic pathways feeding volcanic eruptions are poorly constrained, yet many key interpretations about eruption dynamics depend on knowledge of these geometries. Direct quantification is difficult because vents typically become blocked with lava at the end of eruptions. Indirect geophysical techniques have shed light on some volcanic conduit geometries, but the scales are too coarse to resolve narrow fissures (widths typically 1 m). Kīlauea's Mauna Ulu eruption, which started with <50 m high Hawaiian fountains along a 4.5 km fissure on 24 May 1969, provides a unique opportunity to measure the detailed geometry of a shallow magmatic pathway, as the western vents remain unobstructed to depths >30 m. Direct measurements at the ground surface were augmented by tripod-mounted lidar measurements to quantify the shallow conduit geometry for three vents at a resolution <4 cm. We define the form of the fissure in terms of aspect ratio, flaring ratio, irregularity, sinuosity, and segmentation and discuss the factors influencing these parameters. In the past, simplified first-order fissure geometries have been used in computational modeling. Our data can provide more accurate conduit shapes for better understanding of shallow fissure fluid dynamics and how it controls eruptive behavior, especially if incorporated into computer models.

Hawaii↗

USGS2015

Kilauea's 5-9 March 2011 Kamoamoa fissure eruption and its relation to 30+ years of activity from Pu'u 'Ō'ō

Lava output from Kīlauea's long-lived East Rift Zone eruption, ongoing since 1983, began waning in 2010 and was coupled with uplift, increased seismicity, and rising lava levels at the volcano's summit and Pu‘u ‘Ō‘ō vent. These changes culminated in the four-day-long Kamoamoa fissure eruption on the East Rift Zone starting on 5 March 2011. About 2.7 × 10 6 m 3 of lava erupted, accompanied by ˜15 cm of summit subsidence, draining of Kīlauea's summit lava lake, a 113 m drop of Pu‘u ‘Ō‘ō's crater floor, ˜3 m of East Rift Zone widening, and eruptive SO 2 emissions averaging 8500 tonnes/day. Lava effusion resumed at Pu‘u ‘Ō‘ō shortly after the Kamoamoa eruption ended, marking the onset of a new period of East Rift Zone activity. Multiparameter monitoring before and during the Kamoamoa eruption suggests that it was driven by an imbalance between magma supplied to and erupted from Kīlauea's East Rift Zone and that eruptive output is affected by changes in the geometry of the rift zone plumbing system. These results imply that intrusions and eruptive changes during ongoing activity at Kīlauea may be anticipated from the geophysical, geological, and geochemical manifestations of magma supply and magma plumbing system geometry.

Hawaii↗

USGS2015

Are Piton de la Fournaise (La Réunion) and Kīlauea (Hawai‘i) really “Analog Volcanoes”?

The basaltic ocean island volcanoes of Kīlauea (Island of Hawai‘i) and Piton de la Fournaise (La Réunion Island) are remarkable natural laboratories for volcanology. Both are near the active ends of long hotspot chains and host frequent eruptive activity (both effusive and explosive). Investigations of the geophysical, geochemical, and geologic manifestations of volcanism at the two locales provide insights into a variety of processes, from the supply of magma to its eruption at the surface. The oft-stated claim that Kīlauea and Piton de la Fournaise are “analog volcanoes” appears well founded, at least in part. The two volcanoes share similar characteristics with regard to magma plumbing, occurrence of flank instability, structural and compositional evolution, and eruptive activity. Noteworthy differences include the size of the edifices (Kīlauea is about an order-of-magnitude larger in volume), their life spans (Piton de la Fournaise has been active for twice as long), and flank instability mechanisms. These differences are attributable to Hawai‘i's higher magma supply from and faster plate velocity relative to the hotspot compared to Piton de la Fournaise. Understanding these similarities and differences can be used to leverage studies of processes at one volcano by exploiting their occurrence or absence at the other.

Hawaii↗

USGS2015

“Points requiring elucidation” about Hawaiian volcanism

Hawaiian volcanoes, which are easily accessed and observed at close range, are among the most studied on the planet and have spurred great advances in the geosciences, from understanding deep Earth processes to forecasting volcanic eruptions. More than a century of continuous observation and study of Hawai‘i's volcanoes has also sharpened focus on those questions that remain unanswered. Although there is good evidence that volcanism in Hawai‘i is the result of a high-temperature upwelling plume from the mantle, the source composition and dynamics of the plume are controversial. Eruptions at the surface build the volcanoes of Hawai‘i, but important topics, including how the volcanoes grow and collapse and how magma is stored and transported, continue to be subjects of intense research. Forecasting volcanic activity is based mostly on pattern recognition, but determining and predicting the nature of eruptions, especially in serving the critical needs of hazards mitigation, require more realistic models and a greater understanding of what drives eruptive activity. These needs may be addressed by better integration among disciplines as well as by developing dynamic physics- and chemistry-based models that more thoroughly relate the physiochemical behavior of Hawaiian volcanism, from the deep Earth to the surface, to geological, geochemical, and geophysical data.

Hawaii↗

USGS2015

Onset of rejuvenated-stage volcanism and the formation of Līhu‘e Basin: Kaua‘i events that occurred 3-4 million years ago

For ocean-island volcanoes, an understanding of rejuvenated-stage volcanism requires knowing the age of onset, duration of the volcanic episode, and length of quiescence that preceded the rejuvenated pulse. On the Island of Kaua‘i, cuttings from two lava flows intercepted in the Hanamā‘ulu well (Līhu‘e basin) and assigned to the Kōloa Volcanics on basis of major-element, trace-element, and isotope geochemistry have yielded 40 Ar/ 39 Ar ages of 3.11 and 3.22 Ma. A deeper lava, with age 3.42 Ma, is tentatively assigned to the Kōloa. These ages partly fill a 1 Myr gap in the previously published ages for the Kōloa Volcanics and suggest that rejuvenated-stage volcanism on Kaua‘i has persisted for 3.2 Myr or longer. The quiescent period may have been as short as 0.2–0.3 Myr, possibly briefer. The eastern third of Kaua‘i subsided as much as 1.3 km along an island-long north-south fault between 4.7 and 3.4 Myr ago. The fault marks a stunted episode of extension, inasmuch as displacement diminishes rapidly from the inland area north and south toward the coast and the fault lacks expression on the island's submarine flanks. The Līhu‘e basin formed sometime thereafter: The new ages are from lava flows that bracket shallow marine sediment, so the basin had subsided below sea level before 3 Ma. Though poorly constrained, rates of subsidence are in the range of those from Lāna‘i, which today sits at a distance from the hotspot that is similar to the paleogeographic position of Kaua‘i 3 Ma.

Hawaii↗

USGS2015

Evidence for large compositional ranges in coeval melts erupted from Kīlauea's summit reservoir

Petrologic observations on Kīlauea's lavas include abundant microprobe analyses of glasses, which show the range of melts available in Kīlauea's summit reservoir over time. During the past two centuries, compositions of melts erupted within the caldera have been limited to MgO = 6.3–7.5 wt%. Extracaldera lavas of the 1959, 1971, and 1974 eruptions contain melts with up to 10.2, 8.9, and 9.2 wt% MgO, respectively, and the 1924 tephra contains juvenile Pele's tears with up to 9.1 wt% MgO. Melt compositions from explosive deposits at Kīlauea, including the Keanakāko‘i (A.D. 1500–1800), Kulanaokuaiki (A.D. 400–1000), and Pāhala (10–25 ka) tephra units, show large ranges of MgO contents. The range of melt MgO is 6.5–11.0 wt% for the Keanakāko‘i; the Kulanaokuaiki extends to 12.5% MgO and the Pāhala Ash includes rare shards with 13–14.5% MgO. The frequency distributions for MgO in the Keanakāko‘i and Kulanaokuaiki glasses are bimodal, suggesting preferential magma storage at two different depths. Kīlauea's summit reservoir contains melts ranging from 6.5 to at least 11.0 wt% MgO, and such melts were available for sampling near instantaneously and repeatedly over centuries. More magnesian melts are inferred to have risen directly from greater depth.

Hawaii↗

USGS2015

Petrologic testament to changes in shallow magma storage and transport during 30+ years of recharge and eruption at Kīlauea Volcano, Hawai‘i

Petrologic monitoring of Kīlauea Volcano from January 1983 to October 2013 has yielded an extensive record of glass, phenocryst, melt inclusion, and bulk-lava chemistry from well-quenched lava. When correlated with 30+ years of geophysical and geologic monitoring, petrologic details testify to physical maturation of summit-to-rift magma plumbing associated with sporadic intrusion and prolonged magmatic overpressurization. Changes through time in bulk-lava major- and trace-element compositions, along with glass thermometry, record shifts in the dynamic balance of fractionation, mixing, and assimilation processes inherent to magma storage and transport during near-continuous recharge and eruption. Phenocryst composition, morphology, and texture, along with the sulfur content of melt inclusions, constrain coupled changes in eruption behavior and geochemistry to processes occurring in the shallow magmatic system. For the first 17 years of eruption, magma was steadily tapped from a summit reservoir at 1–4 km depth and circulating between 1180 and 1200°C. Furthermore, magma cooled another 30°C while flowing through the 18 km long rift conduit, before erupting olivine-spinel-phyric lava at temperatures of 1150–1170°C in a pattern linked with edifice deformation, vent formation, eruptive vigor, and presumably the flux of magma into and out of the summit reservoir. During 2000–2001, a fundamental change in steady state eruption petrology to that of relatively low-temperature, low-MgO, olivine(-spinel)-clinopyroxene-plagioclase-phryic lava points to a physical transformation of the shallow volcano plumbing uprift of the vent. Preeruptive comagmatic mixing between hotter and cooler magma is documented by resorption, overgrowth, and compositional zonation in a mixed population of phenocrysts grown at higher and lower temperatures. Large variations of sulfur (50 to >1000 ppm) in melt inclusions within individual phenocrysts and among phenocrysts in most samples provide an unequivocal glimpse of rapid crystal growth amid sulfur degassing at <30 MPa in a turbulent preeruptive environment. We speculate that, during the last decade, one or more shallow open-system reservoirs developed along the conduit between the summit and Pu‘u ‘Ō‘ō and now serve to buffer the magmatic throughput associated with ongoing recharge and eruption. Lava with identical trace-element signatures erupted simultaneously at the summit and at Pu‘u ‘Ō‘ō from 2008 to 2013 confirms magmatic continuity between the vents. Complementary changes in compositions of matrix glasses, phenocrysts, and melt inclusions of summit tephra are mirrored by similar changes in contemporaneous rift lava at eruption temperatures 20–35°C lower than those at the summit. Petrologic parameters measured at opposite ends of the shallow magmatic plumbing system are both correlated with summit deformation, demonstrating that effects of summit magma chamber pressurization are translated throughout interconnected magma pathways in the shallow edifice.

Hawaii↗

USGS2015

Measurement of slow-moving along-track displacement from an efficient multiple-aperture SAR interferometry (MAI) stacking

Multiple-aperture SAR interferometry (MAI) has demonstrated outstanding measurement accuracy of along-track displacement when compared to pixel-offset-tracking methods; however, measuring slow-moving (cm/year) surface displacement remains a challenge. Stacking of multi-temporal observations is a potential approach to reducing noise and increasing measurement accuracy, but it is difficult to achieve a significant improvement by applying traditional stacking methods to multi-temporal MAI interferograms. This paper proposes an efficient MAI stacking method, where multi-temporal forward- and backward-looking residual interferograms are individually stacked before the MAI interferogram is generated. We tested the performance of this method using ENVISAT data from Kīlauea Volcano, Hawai‘i, where displacement on the order of several centimeters per year is common. By comparing results from the proposed stacking methods with displacements from GPS data, we documented measurement accuracies of about 1.03 and 1.07 cm/year for the descending and ascending tracks, respectively—an improvement of about a factor of two when compared with that from the conventional stacking approach. Three-dimensional surface-displacement maps can be constructed by combining stacked InSAR and MAI observations, which will contribute to a better understanding of a variety of geological phenomena.

Hawaii↗

USGS2015

Two magma bodies beneath the summit of Kilauea Volcano unveiled by isotopically distinct melt deliveries from the mantle

The summit magma storage reservoir of Kīlauea Volcano is one of the most important components of the magmatic plumbing system of this frequently active basaltic shield-building volcano. Here we use new high-precision Pb isotopic analyses of Kīlauea summit lavas—from 1959 to the active Halema‘uma‘u lava lake—to infer the number, size, and interconnectedness of magma bodies within the volcano's summit reservoir. From 1971 to 1982, the 206 Pb/ 204 Pb ratios of the lavas define two separate magma mixing trends that correlate with differences in vent location and/or pre-eruptive magma temperature. These relationships, which contrast with a single magma mixing trend for lavas from 1959 to 1968, indicate that Kīlauea summit eruptions since at least 1971 were supplied from two distinct magma bodies. The locations of these magma bodies are inferred to coincide with two major deformation centers identified by geodetic monitoring of the volcano's summit region: (1) the main locus of the summit reservoir &sim;2–4 km below the southern rim of Kīlauea Caldera and (2) a shallower magma body <2 km below the eastern rim of Halema‘uma‘u pit crater. Residence time modeling suggests that the total volume of magma within Kīlauea's summit reservoir during the late 20th century (1959–1982) was exceedingly small (&sim;0.1–0.5 km 3 ). Voluminous Kīlauea eruptions, such as the ongoing, 32-yr old Pu‘u ‘Ō‘ō rift eruption (>4 km 3 of lava erupted), must therefore be sustained by a nearly continuous supply of new melt from the mantle. The model results show that a minimum of four compositionally distinct, mantle-derived magma batches were delivered to the volcano (at least three directly to the summit reservoir) since 1959. These melt inputs correlate with the initiation of energetic (1959 Kīlauea Iki) and/or sustained (1969–1974 Mauna Ulu, 1983-present Pu‘u ‘Ō‘ō and 2008-present Halema‘uma‘u) eruptions. Thus, Kīlauea's eruptive behavior is partly tied to the delivery of new magma batches from the volcano's source region within the Hawaiian mantle plume.

Hawaii↗